• Women's Health Nursing
• /
• v.11 no.1
• /
• pp.27-37
• /
• 2005

Purpose: This study compared climacteric symptoms, knowledge of menopause and menopausal management of middle aged women living in urban and rural areas. Method: The study subjects included 287 women aged 40-64 years in P city and G town. The instruments used in this study were a climacteric symptoms scale and knowledge of menopause and a menopausal management scale. Data was analyzed with SPSS Win 10.0. Result: The mean age of middle-aged women living in urban areas was 47.9 years and that of women in rural areas was 48.0 years. The mean score of the climacteric symptoms of middle-aged women living in urban and rural areas was 48.8 and 50.4 respectively, and was not significantly different. The mean score of the knowledge of menopause of middle-aged women living in urban areas was higher than that of women in rural areas (p=.017). In addition, the mean score of the menopausal management of middle-aged women living in rural areas was higher than that of women in urban areas. Conclusion: This study suggests that not only general characteristics but also living areas should be considered in developing nursing interventions to manage the climacteric symptoms of middle aged women.

• Corrosion Science and Technology
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2019

To find proper lathe machining parameters for SA182 Grade 304 stainless steel (SS), six kinds of samples with different machining surface states were prepared using a lathe. Surface morphologies and microstructures of near surface deformed layers on different samples were analysed. Surface morphologies and chemical composition of oxide films formed on different samples in simulated primary water with $100{\mu}g/L\;O_2$ at $310^{\circ}C$ were characterized. Results showed that surface roughness was mainly affected by lathe feed. Surface machining caused grain refinement at the top layer. A severely deformed layer with different thicknesses formed on all samples. In addition to high defect density caused by surface deformation, phase transformation, residual stress, and strain also affected the oxidation behaviour of SA182 Grade 304 SS in the test solution. Machining parameters used for # 4 (feed, 0.15 mm/r; back engagement, 2 mm; cutting speed, 114.86 m/min) and # 6 (feed,0.20 mm/r; back engagement, 1 mm; cutting speed, 73.01 m/min) samples were found to be proper for lathe machining of SA182 Grade 304 SS.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.5
• /
• pp.301-308
• /
• 2012

Objectives: To examine the association between alcohol consumption habit, types of beverages, alcohol consumption quantity, and overall and cancer-specific mortality among Korean adults. Methods: The alcohol consumption information of a total of 16 320 participants who were 20 years or older from the Korean Multicenter Cancer Cohort were analyzed to examine the association between alcohol consumption habit and mortality (median follow-up of 9.3 years). The Cox proportional hazard model was used to estimate the hazard ratio (HR) of alcohol consumption to mortality adjusting for age, sex, geographic areas, education, smoking status, and body mass index. Results: Alcohol drinkers showed an increased risk for total mortality compared with never drinkers (HR, 1.72; 95% confidence interval [CI], 1.38 to 2.14 for past drinkers; HR, 1.21; 95% CI, 1.06 to 1.39 for current drinkers), while past drinkers only were associated with higher risk for cancer deaths (HR, 1.84; 95% CI, 1.34 to 2.53). The quantity of alcohol consumed per week showed a J-shaped association with risk of mortality. Relative to light drinkers (0.01 to 90 g/wk), never drinkers and heavy drinkers (>504 g/wk) had an increased risk for all-cause and cancer deaths: (HR, 1.18; 95% CI, 0.96 to 1.45) and (HR, 1.39; 95% CI, 1.05 to 1.83) for all-cause mortality; and (HR, 1.55; 95% CI, 1.15 to 2.11) and (HR, 2.07; 95% CI, 1.39 to 3.09) for all cancer mortality, respectively. Heavy drinkers (>504 g/wk) showed an elevated risk for death from stomach and liver cancers. Conclusions: The present study supports the existence of a J-shaped association between alcohol consumption quantity and the risk of all-cause and cancer deaths. Heavy drinkers had an increased risk of death from cancer overall and liver and stomach cancer.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.238-244
• /
• 2008

The essential oil was obtained from the aerial part of Caryopteris incana Miq. by steam distillation, samples were collected by headspace (HS) and solid-phase microextraction (SPME) methods, and the compositions of the essential oil were analyzed by gas chromatography-mass spectrometry (GCMS). The fragrance of the essential oil was fougere and woody. There were sixty-nine constituents in the essential oil: 28 carbohydrates, 22 alcohols, 7 acetates, 7 ketones, 3 aldehydes, and 2 others. Major constituents were 4,6,6-trimethyl [1S-($1{\alpha},2{\beta},5{\alpha}$)]-bicyclo[3.1.1]hept-3-en-2-ol (11.8%), taucadinol (9.4%), myrtenyl acetate (9.2%), pinocarvone (7.0%), 1-hydroxy-1,7-dimethyl-4-isopropyl-2,7-cyclodecadiene (6.3%), ${\delta}$-3-carene (6.2%). By SPME extraction, forty-nine constituents were identified: 22 hydrocarbons, 16 alcohols, 6 acetates, 3 ketones, and 2 ethers. Major constituents of the SPME-extracted sample were ${\delta}$-3-carene (12.6%), (-)-myrtenyl acetate (11.2%), 6,6-dimethyl-2-methylene-bicycol [3.1.1] heptan-3-o1 (10.9%), pinocarvone (9.3%). By HS extraction, ten constituents were identified: 5 hydrocarbons, 2 amines, 1 alcohol, and 2 others. Major constituents of the HS-extracted sample were (Z)-2-fluoro-2-butene (34.9%), ${\delta}$-3-carene (6.9%), 6-(4-chlorophenul)tetrahydro-2-methyl-2H-1,2-oxazine (5.9%). The $IC_{50}$ value (0.011 ${\mu}g/mg$) in MTT assay using HaCaT keratinocyte cell line was lower than those of commercially-selling rosemary and tea tree, suggesting more toxicological studies are needed for commercial use of the essential oil of Caryopteris incana Miq.

• Analytical Science and Technology
• /
• v.25 no.3
• /
• pp.178-189
• /
• 2012

As phthalates classified as toxic to reproduction category 2 and endocrine disrupting chemicals were more strictly regulated as Substances of Very High Concern (SVHC) for authorization in under EU REACH and considered as priority substances in RoHS II, standardization of phthalate testing method is now being proposed in IEC 62321 of IEC TC 111 and the 2nd revision of KS M 1991 is also finished. In order to assist standardization activities related to phthalating testing, solvent extraction part of existing national standards were compared and verified. Recovery of DEHP (diethylhexyl phthalate) from PVC (polyvinyl chloride) by Soxhlet extraction increased in the order of methanol, toluene, dichloromethane and hexane from 46.9% to 95.3% as measured by GC-MS. Optimum extraction time was verified to be 6 hours using hexane. Recovery of DBP (dibutyl phthalate), BBP (butylbenzyl phthalate), and DEHP from different matrixes such as PVC, nitro cellulose, ABS (acrylonitrile butadiene styrene). and EPDM(ethylene propylene diene monomer) rubber were evaluated to be more than 90% up to 99%. The detection limits of phthalates in solvent extraction followed by GC-MS analysis were 0.08~0.3 ${\mu}g/mL$ in solution and 8~30 mg/Kg in polymeric samples. GC-MS analyses of phthalates were carried out using different solvent extraction based on the EN 14372, ASTM D 7083, Japanese test method (MHLW 0906-4) and KS M 1991, proving that equivalent recoveries ranging from 98%~99% were obtained. DBP and DEHP were detected in three consumer products such as a child toy, a power cable and manicure with the amount of 22~1,910 mg/kg.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3581-3586
• /
• 2014

Aim: To investigate the effects of tetramethypyrazine (TMP) on proliferation and apoptosis of the human gastric carcinoma cell line 7901 and its possible mechanism of action. Methods: The viability of TMP-treated 7901 cells was measured with a 3-(4, 5-dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide assay (MTT) and cell apoptosis was analyzed by flow cytometry. The distribution of cells in different phases of cell cycle after exposure of TMPs was analyzed with flow cytometry. To investigate the molecular mechanisms of TMP-mediated apoptosis, the expression of NF-${\kappa}Bp65$, cyclinD1 and p16 in SGC-7901 cells was analyzed by reverse transcription-polymerase chain reaction (RT-PCR) and western blotting. Results: TMP inhibited the proliferation of human gastric carcinoma cell line 7901 in dose and time dependent manners. Cell growth was suppressed by TMP at different concentrations (0.25, 0.5, 1.0, 2.0 mg/ml), the inhibition rate is 0.46%, 4.36%, 14.8%, 76.1% (48h) and 15.5%, 18.5%, 41.2%, 89.8% (72h) respectively. When the concentration of TMPs was 2.0mg/ml, G1-phase arrest in the SGC-7901 cells was significant based on the data for cell cycle distribution. RT-PCR demonstrated that NF-${\kappa}Bp65$ and cyclin D1 mRNA expression was significantly down-regulated in 7901 cells treated with 2.0 mg/ml TMP for 72h (p<0.05), while the p16 mRNA level was up-regulated (p<0.05). The protein expression of NF-${\kappa}Bp65$ and cyclin D1 decreased gradually with the increase in TMP concentration, compared with control cells (p<0.05), while expression of protein p16 was up-regulated (p<0.01). Conclusion: TMP exhibits significant anti-proliferative and pro-apoptotic effects on the human gastric carcinoma cell line SGC-7901. NF-${\kappa}Bp65$, cyclinD1 and p16 may also play important roles in the regulation mechanisms.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.4
• /
• pp.207-215
• /
• 2012

Soft carbons are prepared by heat-treatment of cokes with different amounts of phosphoric acid (2, 4.5, and 10 wt% vs. cokes) at $900^{\circ}C$ to be used as anode materials for lithium ion batteries. From electrochemical measurements combined with structural analyses, we confirm that abundant nano-pores are existed in the microstructure of soft carbons prepared with the phosphoric acid, which are responsible for further lithium ion storage. Significant increase in reversible capacity of soft carbon is attained in proportion to added amount of the phosphoric acid. We also demonstrate the effect of structural modification with phosphoric acid on electrochemical performance of soft carbon to elucidate the origin of additional capacity.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6403-6409
• /
• 2013

Purpose: Biallelic germline variants of the 8-hydroxyguanine (8-OG) repair gene MYH have been associated with colorectal neoplasms that display somatic $G:C{\rightarrow}T:A$ transversions. However, the effect of single germline variants has not been widely studied, prompting the present investigation of monoallelic MYH variants and susceptibility to sporadic colorectal cancer (CRC) in a Chinese population. Patients and Methods: Between January 2006 and December 2012, 400 cases of sporadic CRC and 600 age- and sex-matched normal blood donors were screened randomly for 7 potentially pathogenic germline MYH exons using genetic testing technology. Variants of heterozygosity at the MYH locus were assessed in both sporadic cancer patients and healthy controls. Univariate and multivariate analyses were performed to determine risk factors for cancer onset. Results: Five monoallelic single nucleotide polymorphisms (SNPs) were identified in the 7 exon regions of MYH, which were detected in 75 (18.75%) of 400 CRC patients as well as 42 (7%) of 600 normal controls. The region of exon 1 proved to be a linked polymorphic region for the first time, a triple linked variant including exon 1-316 $G{\rightarrow}A$, exon 1-292 $G{\rightarrow}A$ and intron 1+11 $C{\rightarrow}T$, being identified in 13 CRC patients and 2 normal blood donors. A variant of base replacement, intron 10-2 $A{\rightarrow}G$, was identified in the exon 10 region in 21 cases and 7 controls, while a similar type of variant in the exon 13 region, intron 13+12 $C{\rightarrow}T$, was identified in 8 cases and 6 controls. Not the only but a newly missense variant in the present study, p. V463E (Exon 14+74 $T{\rightarrow}A$), was identified in exon 14 in 6 patients and 1 normal control. In exon 16, nt. 1678-80 del GTT with loss of heterozygosity (LOH) was identified in 27 CRC cases and 26 controls. There was no Y165C in exon 7 or G382D in exon 14, the hot-spot variants which have been reported most frequently in Caucasian studies. After univariate analysis and multivariate analysis, the linked variant in exon 1 region (p=0.002), intron 10-2 $A{\rightarrow}G$ (p=0.004) and p. V463E (p=0.036) in the MYH gene were selected as 3 independent risk factors for CRC. Conclusions: According to these results, the linked variant in Exon 1 region, Intron 10-2 $A{\rightarrow}G$ of base replacement and p. V463E of missense variant, the 3 heterozygosity variants of MYH gene in a Chinese population, may relate to the susceptibility to sporadic CRC. Lack of the hot-spot variants of Caucasians in the present study may due to the ethnic difference in MYH gene.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.210-230
• /
• 1995

To compare the wear resistance of four kinds of commercial acrylic resin teeth [SR-Orthosit PosterioresR(Ivoclar Co., Liechtenstein), Endura PosteriorR(Shofu Inc. Japan), trubyte IPN teethR(Dentsply International Inc., York,), Trubyte BiotoneR(dentsply Inermational Inc. Brazil) by means of the toothbrush abrasion method, the artificial resin teeth were embedded in epoxy resin with the occlusal surfaces aligned in one plane for a total of 40 blocks. There after, each lock was mounted in the arm of the toothbrush abrasion machine(K 236, Japan). Wear measurements were made on the three preconditioned states. Those were as follows : no treatment specimens, thermocycled specimens, and thermocycled specimens which were immeresed applied load of 400g during the buring the brushing cycle. At the end of the 30,000-stroke cycle, each specimen was removed, and weighed. The microhardness of four kinds of commercial resin teeth were determined by means of microhardness tester. Microhardness tests were performed on te no treatment specimens, thermocycled specimens, and thermocycled specimens with immersion in the denture cleansing solution. Finally, the comparison of thermal properties were perfomed using differential scanning calorimeter(DSC-1500). The following results were obtained : 1. In the case of no treatment teeth, the wear amount of endura Posterior(EN) was the greatest among the others(p<0.01), and the wear amount of three kinds of artificial resin teeth was increased in the order of Trubyte IPN teeth(IN), Trubyte Biotone(BN), SR-Orthosit Posteriores(SN) but there was no statistic significance(p>0.01). 2. The wear amount of Trubyte IPN teeth(IT) and Trubyte Biotone(BT), was increased due to thermocycling effect, but that of Endura Posteriores(ET) was decreased conversely(p<0.01). 3. Except for the SR-Orthosit Posteriores(STC), the wear amount of three kinds of artificial resing teeth(that is, ETC, ITC, BTC) was increased due to denture cleansing solution$(Cledent^R)$, but there was no statistic significance(p>0.01). But the wear amount of the SR-Orthosit Posteriores(STC) was the greatest among the others(p<0.01). 4. The wear amount of toothbrush was the greatest in case of contact with occlusal surface of SROrthosit Posteriores resin teeth(p<0.01). 5. the microhardness values(KHN) of the SR-Orthosit Posteriores was the highest among the experimental artificial resin teeth(p<0.01). 6. There was no relationship between microhardness valuse(KHN) and wear amount of four kinds of experimental artificial resin teeth(p<0.01). 7. The differential canning calorimetric property of four kinds of artificial resin teeth did not show endothermal or exothermal peak in the range of $100^{\circ}C$

• Journal of Marine Bioscience and Biotechnology
• /
• v.13 no.2
• /
• pp.76-85
• /
• 2021

Crassostrea gigas were fermented using L. brevis BJ20 to prepare fermented oyster extract (FO). The participants of this study were randomly assigned to FO and placebo (CON) groups. The FO group was given 1.0 g of FO supplementation and the CON group was given sucrose each day for eight weeks. The effects of FO supplementation on body composition, muscula r strength, and blood factors associated with muscle growth were assessed. The FO supplement was enriched with arginine (6,183.3 mg), phenylalanine (217.9 mg), leucine (122.6 mg), isoleucine (59.8 mg), valine (16.4 mg), and γ-amino butyric acid (GABA, 1,053.7 mg). The total fat was significantly decreased in the FO group compared with the CON group (p < 0.05). 60D/S Ext.T/Wo rk and 60D/S Flex.T/Work concomitantly with 60D/S Flex.PeakTQ/BW were significantly increase d by FO treatment compared to CON group (p < 0.05). However, posture stability was not significa ntly different between the groups. The levels of angiotensin-converting enzyme were significantly decreased within the FO group (p < 0.05). The FO group showed significantly decreased levels of tumor necrosis factor-α and increased levels of human growth hormone compared with the CON group (p < 0.01). The levels of insulin-like growth factor-1 increased (p < 0.01) in the FO group while that of creatine kinase and triglyceride decreased significantly compared with the CON group (p < 0.05). These results demonstrated that FO supplementation is effective in preventing sarcopenic obesity and maintaining and strengthening muscular function in elderly wom en. Hence, FO supplements can be used as functional ingredients for these benefits.