• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1431-1436
• /
• 2004

In this paper, measuring programs for EMC type tests in the railway environments were designed and developed the train harmonic current in ATP frequency band and psophometric current using PXI components and LabVIEW software form National Instruments. As real time applications for EMC tests, harmonic current and psophometric current results of the train were also presented. This new measuring programs for EMC tests in the train are expected to increase test reliability and real-time performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.120-123
• /
• 1999

This paper presents the design method of EMC(Electromagnetic Coupling) microstrip array antenna for CS(Communication Satellite) system. Microstrip dipole antennas are attractive elements owing to the desirable properties such as simplicity, small size and linear polarization. From the optimum simulation results by the FDTD method[1], design parameters such as EMC dipole length, width, height and offset are discussed at 12CHz. The array characteristics of 5-elements and 10-elements array are also presented. By adjusting geometry of model antenna, we can design dual polarization EMC microstrip dipole antenna for CS system. Direction of nam beam is easily tilted by the control of distance between dipole elements.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.284-288
• /
• 2011

비점오염원 원단위는 적용이 간편하기 때문에 많은 국가에서 비점오염원 유출량을 산정하기 위하여 사용하고 있다. 그러나 비점오염원의 유출은 지역, 지형, 기후, 토지이용 등과 같은 여러 가지 조건들에 따라 배출양상이 다양하게 나타나므로 신뢰성 있는 원단위를 산정하기 위해서는 장기간에 걸친 실측자료가 뒷받침되어야 한다. 우리나라에서는 지난 1980년대 초부터 비점오염 원단위에 대한 연구가 시작되었으며 수많은 문헌과 연구에서 비점오염원 유출특성을 제시하고 있다. 따라서 본 연구에서는 지난 3년간 낙동강 수계에서 모니터링된 비점오염원 자료를 통하여 유출모형인 SWMM(Storm Water Management Model) 구축하고 또한 구축된 모형을 이용하여 실측한 자료를 통한 EMC값과 기존 문헌에서 제시하고 있는 EMC값을 서로 비교함으로서 본 연구에서 제시하고 있는 EMC값의 적정성 및 선행 자료에서 제시하고 있는 값들의 범위를 분석하고자 하였다. 따라서, 본 연구는 모델링을 통하여 비점오염원 유출특성을 파악함과 동시에 실측값 및 기존 문헌에서 제시 하고 있는 EMC를 비교 분석함으로서 적정한 비점오염원의 EMC 값 범위를 파악하여 지목별 비점오염원 원단위 산정에 큰 도움이 되리라 판단된다.

• Journal of Dairy Science and Biotechnology
• /
• v.21 no.2
• /
• pp.88-96
• /
• 2003

Cheese flavor is derived from three main pathways, that are proteolysis, lipolysis and glycolysis, the extent of which varies according to the cheese variety. Proteolysis is the most complex of the three primary events during cheese ripening. The basis of EMC technology is the use of specific enzymes acting at optimum conditions to produce required cheese flavors from suitable substrates. These enzymes consist of proteinases, peptidases, lipases, esterases. The key factors in EMC production are the type of cheese flavor required, the type and specificity of enzyme or cultures used, their concentration and some processing parameters, such as pH, temperature, agitation, aeration, and incubation time. The emulsifiers, bacteriocins, flavor compounds, and precursors also effect to it importantly. The dosage of enzyme or starter culture used is dependent on the intensity of flavor required, processing time and temperature and the quality of the initial substrate. To produce a consistent EMC product it is necessary to have a highly controlled process, and a detailed knowledge of the enzymatic reactions under the conditions used must be fully understood.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.6
• /
• pp.491-499
• /
• 2003

Copper-based leadframe sheets were oxidized in a hot alkaline solution to form brown-oxide layer on the surface and molded with epoxy molding compound (EMC). The brown-oxide-coated leadframe/EMC joints were machined to form sandwiched double-cantilever beam (SDCB) specimens and sandwiched Brazil-nut (SBN) specimens for the purpose of measuring the fracture toughness of leadframe/EMC interfaces. The SDCB and the SBN specimens were designed to measure the fracture toughness of the leadframe/EMC interfaces under nearly mode-I loading and mixed-mode (mode I ＋ mode II) loading conditions, respectively. Fracture surfaces were analyzed by various equipment such as glancing-angle XRD, SEM, AES, EDS and AFM to elucidate failure path. Results showed that failure occurred irregularly in the SDCB specimens, and oxidation time of 2 minutes divided the types of irregular failures into two classes. The failure in the SBN specimens was quite different from that in the SDCB specimens. The failure path in the SBN specimens was not dependent on the phase angle as well as the distance from tips of pre-cracks.

• The Korean Journal of Food And Nutrition
• /
• v.8 no.3
• /
• pp.192-198
• /
• 1995

For the production of EMC, various professes and lipases were used to hydrolyse cheese sulk. The optimal conditions of various proteases were as follows, pronase-3$0^{\circ}C$, p14 7.0, pancreatln-4$0^{\circ}C$, pH 8.0, pacific protease-3$0^{\circ}C$, pH 7.0 and protease from Asp. sp. -5$0^{\circ}C$, pH 8.0. The optimal conditions of various lipases were as follows ; pancreatic lipase-5$0^{\circ}C$, pH 8.0, palatase ML-5$0^{\circ}C$, pH 7.0 and lipase form Candida -4$0^{\circ}C$, pH U.0. After hydrolysation under optimal conditions, the amounts of free amino acid and free fatty ac14 were increased with reaction time. Hydrolysates of pacific protease and pronase were showed high amount of free amino acid(0.67mg/ml and 0.74mg/ml). Especially EMC had high amount of glutamic acid and leucine. Lipase from Candida cylindracea produced high amount of free fatty acid (24.63 mg/ml) Butyric acrid, palmitic acid, stearic acid and oleic acid among free fatty acids were showed high amounts. Sensory evaluation of various MC were tasted nth 8 panelist. EMC produced with pancreatic lipase was most bitterness and EMC produced with palatase ML was best acceptable cheese flavor.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.1
• /
• pp.219-227
• /
• 2017

Current military command information system uses electronic equipment a lot on which semiconductor chip is attached. It seems its' importance will increase more with latest information communication technology developing. Electronic equipment which uses electricity contains regular tolerance to high output electric signal. And EMC specification is the standardized of this electronic equipment's tolerance. On the other hand, the Institute of Atomic Energy Research has ever declared that high output electromagnetic pulse(EMP) will be broken out within the radius of 170Km when 10kt nuclear explosion occurs at an altitude of 40Km above Seoul. Then, the region suffer from the damage of most electronic equipments. Therefore, the norm to protect the influences in that case is defined by EMP protection specification. Most common electronic equipments meet the EMC norm, but there is no way to check whether they meet the EMP norm or not. That is because it is difficult to check whether they meet EMP protection norm and is on the matter of cost. Except inevitable cases, there is no review of checking whether they meet the norm or not. Considering the above, in this research, we speculate about the measures to improve military EMP protection ability by analyzing the EMC-EMP correlation and checking the EMP protection ability of general electronic equipment through the analysis.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.21-29
• /
• 2024

In this study, EMC(Epoxy molding compound) waste from the semiconductor molding process is recycled and synthesized into silica nanoparticles, which are then applied as abrasive materials contains CMP(Chemical mechanical polishing) slurry. Specifically, silanol precursor is extracted from EMC waste according to the ultra-sonication method, which provides heat and energy, using ammonia solution as an etchant. By employing as-extracted silanol via a facile sol-gel process, uniform silica nanoparticles(e-SiO₂, experimentally synthesized SiO₂) with a size of ca. 100nm are successfully synthesized. Through physical and chemical analysis, it was confirmed that e-SiO₂ has similar properties compared to commercially available SiO₂(c-SiO₂, commercially SiO₂). For practical CMP applications, CMP slurry is prepared using e-SiO₂ as an abrasive and tested by polishing a semiconductor chip. As a result, the scratches that are roughly on the surface of the chip are successfully removed and turned into a smooth surface. Hence, the results present a recycling method of EMC waste into silica nanoparticles and the application to high-quality CMP slurry for the polishing process in semiconductor packaging.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1207-1215
• /
• 2008

Satellite generates a complex electromagnetic noise by conducted and radiated coupling effect of the various electrical instruments. This noise may cause serious problems on the satellite system. To minimize the electromagnetic coupling effects and maintain the system safety margin, system noise reduction technique should be applied from the beginning of the system design. The COMS system is evaluated by measuring the conducted noise on system electrical power leads at PSR(Power Supply Regulator) and verifying a 6 dB system safety margin under the complex noise environment with current injection. The radiated noise due to the complex transmit antenna configuration is evaluated by integrating all unit-level RE measurement results, and the RF compatibility between spacecraft and launch vehicle is analyzed with the above estimations. This paper describes the COMS EMC compatibility analysis with respect to each unit level EMC test results, and RF compatibility analysis between spacecraft and launch vehicle. The analyzed results will be reflected on FM(Flight Model) EMC test.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.2
• /
• pp.29-38
• /
• 2007

This study was undertaken to investigate the variation of equilibrium moisture content (EMC) in transverse direction and three different directional (longitudinal, radial, and tangential) linear movements, and diffusion coefficients within a tree disc of Korean red pine (pinus densiflora). The EMC gradually increased in heartwood from pith. Therefore, the chemical components might differ even in heartwood and the radial variation in EMC might have a close relationship with the cellulose content within a cross section. The specific gravity increases gradually from pith and the porosity has not direct influence on the variation of EMC within a tree disk. Both the radial and tangential diffusion coefficients exhibited clear trend of increase from pith. The EMC change (${\Delta}EMC$) and tangential diffusion coefficient were close to be axisymmetrical but others were deviated from axisymmetry. The diffusion coefficient decreases with decreasing an activation energy and specific gravity, The diffusion coefficient increased with increasing ${\Delta}EMC$ and hygroscopicity of wood might be inversely proportional to the activation energy, The fJEMC may depend on the chemical constituents of cellulose, hemicellulose and lignin. As the number of sorption sites and sorption capacity of wood increase, therefore, it might be assumed that the hygroscopicity of wood increases while activation energy decreases. Modeling physico-mechanical behavior of wood, the variations should be considered to improve the accuracy.