• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.41-46
• /
• 2023

It is very important to meet the maximum detection range in a radar system. In order to meet the maximum detection Range, the sensitivity of the received signal of the radar system must be high. In addition, the dynamic range should be wide in the radar signal processing board. To meet these requirements, the signal processing board must be designed to be robust against external and internal noise. In particular, a design is required to minimize the effect of noise generated by various switching circuits inside the board on the received radar signal. In this paper, we derive the requirements of the signal processor board to meet the radar system performance and describe the design to meet the derived requirements. In addition, the EMC design to minimize the influence of noise input from the outside or generated from the inside is described. Confirm the secured performance through the test of the manufactured board.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.602-609
• /
• 2015

In this paper, a zero current transition (ZCT) double-ended flyback converter is proposed. All of the switching elements act under soft switching conditions and the voltage stress of the main switches is limited to the input voltage due to the innate behavior of the double-ended flyback converter. Providing soft switching conditions and clamping the voltage stress improves the efficiency and electromagnetic compatibility (EMC). The Proposed converter is analyzed in detail and its operating modes are discussed in detail. Experimental results are presented to verify the theoretical predictions. Moreover, the conducted electromagnetic emissions of the proposed ZCT double-ended flyback converter are measured to show another merit of the proposed converter in addition to providing soft switching conditions. The measured electromagnetic interference (EMI) of the proposed converter demonstrates that its EMI is lower than the conventional double-ended flyback converter. Furthermore, two simple and cost effective EMI reduction methods are applied to satisfy the EMC standard.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.396-400
• /
• 2009

In this paper, electromagnetic topology (EMT) was used to analyze the electromagnetic compatibility (EMC) of RF circuits including passive and active components. It is difficult to obtain usable results for problems relating to electromagnetic coupling in complex systems when using conventional numerical or experimental methods. Thus it is necessary to find a new methodology for analyzing EMC problems in complicated electromagnetic environments. In order to consider the nonlinear characteristics of active components, a SPICE diode model was used. A power detector circuit and the receiver circuit of a radio control (RC) car were analyzed and experimented in order to verify the validity of this method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.213-220
• /
• 2006

This paper investigates how the PCB power-bus sturcture's characteristics are influenced by the loading of decoupling capacitors in conjunction to other lumped elements including vias. The fields and impedance profiles are rigously evaluated and analyzed on various cases loaded with the above components and their effects will be given to bring better PCB EMC countermeasurs.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.429-432
• /
• 2005

This paper investigates how the PCB power-bus structure's characteristics are influenced by the loading of decoupling capacitors that are placed close to vias, on purpose or not. It is worthwhile to see the correlated effects of the aforementioned lumped elements in that when they inevitably share one DC power-bus they will result in positive or negative changes in the PCB EMC design. The EM fields and impedance profiles are rigously calculated on the PCB power-bus cases loaded with the above components and their effects will be given to bring better PCB EMC countermeasures.

• Journal of the Korea Furniture Society
• /
• v.19 no.1
• /
• pp.75-82
• /
• 2008

A series of the studies on the applied physical properties of main domestic species have been conducted last three years. Equilibrium moisture content(EMC) of Pinus koraiensis, Larix kaemferi, Pinus koraiensis were investigated. The experiments for sorption property were conducted with 20- and 80-mesh wood powder and resulted in their EMC's at various sorption conditions. Amount of moisture sorption and sorption speed of Larix kaemferi were shown the most large values and very fast among three Korean main coniferous wood.

• Electronics and Telecommunications Trends
• /
• v.16 no.3 s.69
• /
• pp.39-51
• /
• 2001

최근 전기ㆍ전자 분야의 급속한 발전과 더불어 PCS 및 IMT-2000 등과 같은 무선 이동통신 서비스 사용이 증가함에 따라 전자파(Electromagnetic Wave)를 이용한 기술들이 하루가 다르게 개발되고 상용화되고 있다. 이러한 전자파 이용에 따른 역기능(inverse effect)으로 전자파 환경 오염에 대한 심각성과 국내ㆍ외 규제 기준의 폭이 점점 더 강화되고 있는 실정이다. 특히 전자파장해(EMC)에 대한 국제 규제 환경이 날로 강화되고 있어, 관련 분야의 제반 규제에 대한 기술적인 파악 및 대책 기술의 개발이 요구되고 있다. 본 고에서는 전자파장해 관련 국제 표준화 기구와 역할, 그리고 그러한 기구에서 논의중인 규제규격에 대해 알아보고, 이러한 기술기준에 대응하기 위한 노력의 일환으로 추진되어 온 국내ㆍ외 연구기관에서 수행된 전자파장해 관련 연구에 대해 기술하고자 한다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.235-240
• /
• 2009

In automobile, the introduction of electronically commutated motors has been accompanied by a proliferation of electronic devices. With this proliferation of electronic devices, an emphasis has been placed on EMC issues. This paper is proposed to use SRM as a radiator cooling fan in automotive applications. To drive SRM, Energy efficient C-dump converter is applied. Energy efficient C-dump converter, derived from the conventional C-dump converter, is proposed as a switched reluctance motor (SRM) drive for automotive engine cooling application. It is verified more efficient than other converters through simulation and experiments. And also SRM is valid for automotive applications that have strict EMC standards. Simulation and experimental results obtained on a laboratory prototype are finally presented to evaluate the performance.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.239-241
• /
• 2009

This paper gives the activities and trend analysis handled in the ITU-T study group 5 meeting. In the meeting, the title of SG(Study Group)5 was changed into 'Environment and climate change' since the role of the former Focus Group 'ICT and Climate Change' was moved to SG5. SG5 consists of 3 WP(Working Part) and have total 20 Questions. The Recommendations to be established or revised were discussed and new Recommendations, K.79 and K.80, were consented. The agenda for the human exposure to electromagnetic fields due to radio systems and mobile equipment was focused and discussed in detail. Also, related to ICT and climate change, new questions to be studied in this study period were discussed and defined.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.119-123
• /
• 2000

This paper described a design for microstrip antenna with EMC cross dipole for circular polarization. To realize the wide bandwidth and circular polarization, the elertromagnetic-coupled cross dipole are used. The calculated axial ratio is about 0.1 dB in the main bean direction at 12 GHz and the circular polarization is realized.