• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.755-760
• /
• 2013

The electromagnetic compatibility and its effects, and the system design considerations in space environment are studied in this paper using Multipator. The system level EMC test results of digital channel amplifier(DCAMP), its affects upon the H/W improving methods regarding its over exceed value of EMC specification are discussed. These analysis values and test results can be used as the criteria for the selection of EMC requirements and of the MILSATCOM system design.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.51-63
• /
• 1999

The effects of high filler loading technique on the reliability of epoxy molding compound (EMC) as a microelectronic encapsulant was investigated. The method of high filler loading was established by the improvement of maximum packing fraction using the simplified packing model proposed by Ouchiyama, et al. With the maximum packing fraction of filler, the viscosity of EMC wart lowered and the flowability was improved. As the amount of filler in EMC increased, several properties such as internal stress and moisture absorption were improved. However, the adhesive strength with the alloy 42 leadframe decreased when the filler content was beyond the critical value. It was found that the appropriate content of filler was important to improve the reilability of EMC, and the optimum filler combination should be selected to obtain high reliable EMC filled with high volume fraction of filler.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.573-578
• /
• 2004

EED consists of bridgewire, explosive charge, lead pins and metal case. If a firing signal is injected to EED， the explosive charge in EED is initiated by heating of bridgewire. Electromagnetic waves radiated from high power transmitters or radars can also cause unexpected firing of EED. Therefore, EMC design and test requirements for EED in military specifications are established and applied. This report describes the characteristics of RF sensitivity fur a firing fuse which is used fur EMC test instead of a real EED installed in aircraft. RF firing level of the fuse was predicted using transmission line(TL) theory. n sensitivity and RF sensitivity specified in military specifications were measured.

• Journal of Environmental Impact Assessment
• /
• v.23 no.1
• /
• pp.67-74
• /
• 2014

The aim of this study was evaluated the effects of total rainfall, rainfall intensity and antecedent dry days and identify the correlation analysis with the EMC removal efficiency, in order to provide an understanding of the operation and maintenance factors of constructed wetland in flood pumping station. This study was conducted total of 20 monitoring in a catchment(326.2 ha) of constructed wetland in Ga-un flood pumping station located at the downstream of the Wang-suk stream. The determined EMC removal efficiencies were $36.04{\pm}9.45%$ for BOD, $38.50{\pm}13.50%$ for $COD_{Mn}$, $34.34{\pm}13.05%$ for TN and $34.22{\pm}14.27%$ for TP, respectively. These results showed that the pollutants concentration and EMC were reduced while passing through the constructed wetland. In the correlation analysis, the highly correlations with EMC removal efficiency of BOD and $COD_{Mn}$ were observed for total rainfall and rainfall intensity (P<0.05). However, the correlations were not found with TN and TP for rainfall variables.

• Archives of Plastic Surgery
• /
• v.32 no.5
• /
• pp.653-655
• /
• 2005

Epithelial-myoepithelial carcinoma (EMC) of the salivary gland is a rare tumor that comprises approximately 1% of all salivary gland tumors. It has a distinctive histological appearance comprising ductal structures with an inner epithelial cell component and an outer layer of myoepithelial cells. We report a case of EMC of the parotid gland in a 41- year-old man. He presented left-sided subauricular swelling developed 3-month earlier. Neck CT scans revealed a well-defined mass in the left superficial parotid gland. He underwent superficial parotidectomy and was diagnosed as EMC. He was taken postoperative radiotherapy. There was no evidence of recurrence during a follow-up period of 12 months. A EMC is a low grade malignant tumor which can cause diagnostic confusion during workup and also frequently misdiagnosed as other benign or malignant tumor.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.1-5
• /
• 1998

In this study, it was examined the method to estimate equilibrium moisture content(EMC) at high vapor pressures and high temperatures above $100^{\circ}C$. The material used for the experiment was Sugi(Cryptomeria japonica). EMC was investigated at temperatures ranging from $100^{\circ}C$ to $160^{\circ}C$ and under saturated vapor pressures above 1 atm. The correlation between temperatures and vapor pressures have a good agreement with those observed by thermocouple and pressure gauge in the air state of autoclave, respectively. A sensitivity of quartz spring was 65mm/g. Moisture content(MC)s calculated from the quartz spring elongation by vapor sorption showed a good agreement with MCs by oven-dried method. Using this system, it was found that EMC at high vapor pressures and high temperatures above $100^{\circ}C$ were higher than EMC of wood in 1 atm pressure conditions. With this system, therefore, it was concluded that the EMCs of wood and wood-based materials at high temperatures were able to be evaluated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.139-142
• /
• 2009

Rapid developments in the field of electronic communication have given people's daily life much more convenience and abundance. However, making precise electrical and electronic devices and control systems lighter, smaller, and faster have caused lots of problems such as interference of external electric source, malfunction brought by electric fast transient(EFT), and influence on human body. In this research, the EMC filter in the high powered breaker was designed and fabricated as a countermeasure. The filter attenuated noise more than 30 ~ 75 dB in the range of 10 MHz ~ 1.5 GHz. And, when the EFT of 4 kV in the level 4 of IEC 61000-4-4 was induced, it was soon suppressed to 600 V.

• Journal of Korean Society on Water Environment
• /
• v.34 no.6
• /
• pp.650-660
• /
• 2018

The objective of this study was to compare the rainfall-runoff characteristics in streams of classified urban and rural watershed using land use and population density. EMC (event mean concentration) of BOD, COD, TP and SS increased significantly in urban and rural watershed, but that of TN remained unchanged. Although there were no significant differences in EMC of BOD, COD, TN, TP depending on the watershed characteristics, EMC of BOD and COD significantly increased in the urban watershed, while EMC of TP increased in the rural watershed. In the urban watershed, the first flush time was faster and the first flush effect was stronger in BOD, COD, and TP. However, the difference between cumulative mass and cumulative volume was found to be less than 0.2 in the rural watershed, indicating a weak first flush effect. The discharged masses of BOD (70 %), COD (64 %), and TP (66 %) in the first flush of runoff were higher in urban watershed, while TN (67 %) was higher in rural watershed. The reproducibility of first flush time and the strength of first flush using CV (coefficient of variation) was found to be more reproducible for first flush time in both watersheds. In rural watershed, the CV value of first flush time for TP out of water quality parameters was lower. Whereas the CV values of first flush time for BOD, COD and TP in urban watersheds were similar.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.94-98
• /
• 2023

In the case of high-speed data transmission on high multilayer boards, signal coherence is a problem, especially due to the via hole, and a solution to improve return loss or insertion loss by applying a back drill to the via hole is being proposed. In this paper, Near-Field Electromagnetic measurements were made on a high multilayer board to determine how the presence or absence of back drill affects signal consistency. For this purpose, we used a signal generator, spectrum analyzer, and EMC scanner on a test board to determine if it is possible to distinguish between areas with and without back drill in the via holes of the stubs on the board. Also, we analyzed the measured value of S11, S21 and EMC etc. for how much it improves the signal attenuation of the stub with back drill. Through this, we knew that less electromagnetic waves are generated the stub via with back drill. At future research, we will analyze how much it improves the signal loss and electromagnetic waves due to the depth of back drill.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.4
• /
• pp.531-537
• /
• 1999

A copper based leadframe was oxidized in brown-oxide forming solution, then the growth characteristics of brown oxide and the effect of brown-oxide formation on the adhesion strength of leadframe to epoxy molding compound (EMC) were studied by using sandwiched double cantilever beam (SDCB) specimens. The brown oxide is composed of fine acicular CuO, and its thickness increased up to ~150 nm within 2 minutes and saturated. Bare leadframe showed alomost no adhesion to EMC, while once the brown-oxide layer formed on the Surface of leadframe, the adhesion strength increased up to ~80 J/$\m^2$ within 2 minutes. Correlation between oxide thickness, $\delta$ and the adhesion strength in terms of interfacial fracture toughness, $G_{c}$ was linear. Considering the above results, we might conclude that the main adhesion mechanism of brown-oxide treated leadframe to EMC is mechanical interlocking, in which fine acicular CuO plays a major role.e.