• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.193-197
• /
• 2009

In this paper, the EM wave absorber was designed and fabricated for improvement of Wireless LAN environment at 2.4 GHz. We fabricated several samples in different composition ratios of Sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Sendust and CPE was searched as 80: 20 wt.% by experiments and simulation Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the EM wave absorber was fabricated based on simulated data. Simulated and measured results agreed well. As a result, the developed EM wave absorber with thickness of 3.25 mm has absorption ability of 19 dB at 2.4 GHz.

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.2
• /
• pp.289-298
• /
• 1998

We investigate the distribution of likelihood ratio test(LRT) of null hypothesis a sample is from single gamma with unknown shape and scale against the alternative hypothesis a sample is from a mixture of two gammas, each with unknown scale and unknown (but equal) scale. To obtain stable maximum likelihood estimates(MLE) of a mixture of two gamma distributions, the EM(Dempster, Laird, and Robin(1977))and Modified Newton(Jensen and Johansen(1991)) algorithms were implemented. Based on EM, we made a simple structure likelihood equation for each parameter and could obtain stable solution by Modified Newton Algorithms. Simulation study was conducted to investigate the distribution of LRT for sample size n = 25, 50, 75, 100, 50, 200, 300, 400, 500 with 2500 replications. To determine the small sample distribution of LRT, I considered the model of a gamma distribution with shape parameter equal to 1 + f(n) and scale parameter equal to 2. The simulation results indicate that the null distribution is essentially invariant to the value of the shape parameter. Modeling of the null distribution indicates that it is well approximated by a gamma distribution with shape parameter equal to the quantity $0.927+1.18/\sqrt{n}$ and scale parameter equal to 2.16.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1019-1025
• /
• 2004

The X-band 10${\times}$10 waveguide slot array antenna for SAR is designed, fabricated and measured. The array antenna is designed using the equivalent circuit model based on the field distribution of the dominant mode, TE$\sub$10/, and EM simulation. The method to decide optimum angle of the centered inclined slot(coupling slot) and the optimum of offset of the longitudinal slot(radiating slot) is provided. The designed antenna structure is EM simulated and fabricated. The measured return loss bandwidth is 180 MHz at 9.15 GHz , the side lobe level is below -25 dB, HPBW is about 9$^{\circ}$, and the gain is 25.5 dB. These results are similar to the simulation data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.131-137
• /
• 2011

This paper analyzes EM(Electromagnetic) characteristic in the high voltage connector for the hybrid electric vehicle. The connector bridges the electrical components and helps transferring electrical power and signal through it. The necessity of the high voltage and current connector development is emphasized because the hybrid electric vehicle recently uses the high voltage and current more than 500V and 80A. So far there has not been international EMC (Electromagnetic Compatibility) standards to limit the RE(Radiation Emission) from the connector for the hybrid electric vehicle. In this paper we analyzed EM characteristic of the 288V, 65A connector to check if the RE from the high voltage connector could be within the RE limit standard of vehicle. Three-dimensional modeling and simulation was conducted by using MWS(Microwave Studio) of the CST corporation, and the result was compared with the measured RE data, which showed good coincidence each other.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.427-432
• /
• 2017

This study describes the design and implementation of SHF band Downconverter Digital Satellite Communication. The SHF band Downconverter unit consists of PLDRO and Frequency converter. In Frequency converter, microstrip BPF and LPF designed through the pre EM simulation are implemented to minimize the unwanted spurious in Frequency converter. Through the pre-simulation analysis of space environment, the possibility of and minimized about the malfunction of equipment and we designed a reliable SHF band Downconverter through simulation for a TID according to the vibration generated during the launch and space radiation environment, and compared pre-simulation of main performance results to test results about main performances of SHF band Downconverter after production.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.1
• /
• pp.255-261
• /
• 2014

Many studies have estimated a mixture of binomial distributions. This paper considers an extension, a mixture of shifted binomial distributions, and the estimation of the distribution. The range of each component binomial distribution is rst evaluated and then for each possible value of shifted parameters, the EM algorithm is employed to estimate those parameters. From a set of possible value of shifted parameters and corresponding estimated parameters of the distribution, the likelihood of given data is determined. The simulation results verify the performance of the proposed method.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1209-1217
• /
• 2006

For the mixture of shifted Poisson distributions, a method of parameter estimation is proposed. The range of the shifted parameters are estimated first and for each shifted parameter set EM algorithm is applied to estimate the other parameters of the distribution. Among the estimated parameter sets, one with minimum likelihood for given data is to be set as the final estimate. In simulation experiments, the suggested estimation method shows to have a good performance.

• Communications for Statistical Applications and Methods
• /
• v.14 no.3
• /
• pp.517-530
• /
• 2007

We studied a modelling process for unimodal and multimodal circular data by using von Mises and its mixture distribution. In particular we suggested EM algorithm to find ML estimates of the mixture model. Simulation results showed the suggested methods are very accurate. Applications to two kinds of real data sets are also included.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.246-251
• /
• 2016

This paper has optimized WPT (wireless power transfer) antenna, and compared EM (electromagnetic) simulation result with measurement for the magnetic resonant type standard of A4WP (alliance for wireless power) using 6.78MHz frequency and 1m distance. Power transmission distance is affected by various factors such as system shape, antenna size, and resonator coil pitch etc, which were confirmed by the EM simulation. By simulation an optimized WPT antenna was designed for a fixed distance, and the transmission loss ${\mid}S_{21}{\mid}$ has been calculated with changing distance. Measurement was carried for the fabricated antenna, and the measured transmission loss is 1.5dB with 70% efficiency at maximum 1.3m distance compared to the simulated loss of 1.6dB with 69% efficiency

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.99-109
• /
• 2010

Recently, SIW(Substrate Integrated Waveguide) is intensively studied because of its high Q and easy integration with other devices. However, lacks of analytic characterization of SIW makes it difficult an accurate design of a SIW filter along the conventional filter design method. In this paper, two kinds of a three-stage 10 GHz SIW bandpass filter of fractional bandwidth 10% are designed using 3D EM simulator HFSS based on the recently presented EM filter design method. Two types of a modified CPW to SIW transition is proposed and employed as a SIW to microstrip transition necessary for measurement. The transitions provide an easy measurement with commercial test fixture by TRL calibration. The two proposed transitions are included in the SIW filters. The fabricated filters shows the center frequency of 10 GHz, fractional bandwidth 10%, a return loss of about 12 dB, and insertion loss of about 0.8 dB.