• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.192-193
• /
• 2005

Magnesium thin films were prepared on cold-rolled steel substrates by RF(Radio Frequency) magnetron sputtering technique.$^{1)}$ The crystal orientation and monitoring of the deposited films were investigated by using XRD(X-ray Diffraction) and EIS(Electrochemical Impedance Spectroscopy), respectively. The corrosion rates of Mg thin films deposited with different argon gas pressure and substrate bias voltage were monitored by AC impedance method under a cyclic wet-dry condition, which was conducted by exposure to alternate conditions of 1h immersion in 3%NaCl solution and 5h drying at 60% RH and 25$^{\circ}C$. The result of corrosion rate of Mg thin films deposited at various Ar gas pressures and substrate bias voltage under wet-dry cyclic exposure in chloride-containing solutions was showed the following conclusions. At the region I during the onset of the wet cycle, corrosion rate showed relatively low value. The increase in the Corrosion rate of region II is due to the increase in the chloride concentration. Corrosion rate of region III during the onset of the cycle zero and salt crystals remain on the metal surface.$^{2)}$

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.29.2-29.2
• /
• 2010

The Extreme ultraviolet Imaging Spectrometer (EIS) on board Hinode provide us with excellent imaging spectroscopic data with very good spatial and spectral resolutions, which can be used for detecting Doppler flows in transition region and coronal lines as well as diagnosing plasma properties such as temperature, density, and non-thermal velocity. In this study we have made an EUV-imaging spectroscopic study of the source region of a partial halo coronal mass ejection (CME) that occurred on 2007 July 9 in NOAA 10961. Dopplergrams are obtained before and after the CME eruption using 12 EIS spectral lines (Log T= 4.9~7.2). Major results are summarized as follows. First, it is noted that either red shifts disappeared or blue shifts newly appeared for all spectral lines lower than Log T =6.0. Second, there were significant intensity increases for all wavelengths. Third, there were no significant variations in non-thermal motions for all wavelengths. We found one interesting bright point that newly appeared after the CME eruption. We discuss the implication on the results in terms of the CME eruption.

• CELLMED
• /
• v.2 no.1
• /
• pp.10.1-10.6
• /
• 2012

Acupuncture works by stimulating peripheral sensory nerves and their endings causing an increase in cutaneous blood flow and microcirculation, as well as release of neurotransmitters, neuropeptides, and hormones. SP6 Patch is a nanoscale nontransdermal device that mildly stimulates Stomach 36 (zusanli) and other acupuncture points. As stimulation of these points has been indicated to have an effect on hypothalamic function, it is of great research interest to investigate the effect of SP6 Patch on the physiology of organs that are affected by hypothalamic regulation. Bioelectrical tissue impedance data indicative of cellular physiologic organ function, using an Electro Interstitial Scan (EIS) system, were acquired from hypothalamus, pancreas, liver, intestines, kidneys, thyroid and adrenal glands in 10 (1 male, 9 females) volunteers while wearing the SP6 Patch daily for 1 week. EIS testing was performed at baseline with no patch, 30 min after wearing the patch, and after wearing the patch 12 h/day for 1 week. Subjects were instructed to keep well hydrated during the study period. All subjects served as their own control. The hypothesis was: The SP6 Patch worn 12 h/day on the Stomach 36 acupuncture point for 1 week, may significantly improve cellular physiologic functional status of different organs measured by EIS. All tested organs achieved significant improvement in their functional physiologic status after wearing the SP6 Pach 12 h/day for 1 week compared to baseline with an overall average statistical power > 89%. Based upon these results the hypothesis was accepted as true.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.4 no.2
• /
• pp.144-149
• /
• 2012

This paper reviews the uncovered people of the Korean Employment Insurance System (EIS) and analyzes policy options for minimizing the dead zone of the EIS. There are several policy options such as subsidizing insurance premium to employers and employees of small companies, extending coverage of excluded groups, relaxing qualifications of unemployment benefits and increasing benefit period and level, introducing the unemployment assistance system, introducing the unemployment insurance savings account system, extending coverage to non-wage workers and individualizing package services. According to the survey to the specialists and comparative evaluation criteria, the best policy option to minimize the dead zone of the EIS was to activate individualizing package services of intensive consultation, job place services, tailored vocational training, income support, daycare services, etc. to cure complex employment barriers of job seekers.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.4
• /
• pp.137-143
• /
• 2005

CrSiN coatings of stepwise changing Si concentration were deposited on stainless steel by closed field unbalanced magnetron sputtering (CFUBM) system. Microstructure of the films due to the Si concentration is measured by XRD. The corrosion behavior of CrSiN coatings in deaerated $3.5\%$ NaCl solution was investigated by potentiodynamic test, electrochemical impedance spectroscopy (EIS) and surface analyses. The microstructure of CrSiN film depends on the Si concentration. When Si/(Cr+si) was under $11.7\%$, preferred orientation is defined at CrN(220), CrN(311) and $Cr_2N(111).$ The results of potentiodynamic polarization tests showed that the corrosion current density and porosity decreased with increasing Si/(Cr+si) ratio. EIS measurements showed that the corrosion resistance of Si-bearing CrN was improved by phase transformation of the film, which leads to increase of pore resistance and charge transfer resistance. At the Si(Cr+si) ratio of 20, the Si-bearing CrN possesses the best corrosion resistance due to the highest pore resistance and charge transfer resistance.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.3
• /
• pp.157-162
• /
• 2011

The stability at elevated temperatures of a surface film formed on a graphite electrode in lithium secondary batteries was investigated by transmission electron microscopy (TEM) and electrochemical AC impedance spectroscopy (EIS). TEM analysis revealed that the surface film partly dissolved in the electrolyte solution during storage at $60^{\circ}C$, resulting in a decrease in the thickness of the surface film and a change in its morphology to a porous structure. On the other hand, an increase in the impedance of the surface film which is attributable to a change in composition of the surface film was confirmed by EIS analysis during the storage at $60^{\circ}C$. It was also shown that the addition of vinylene carbonate or 1,3-propane sultone or etylene sulfite, even if limited, improves the stability of the surface film at elevated temperatures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.447-447
• /
• 2012

최근 생물전자공학에서 의료 산업 환경 등 많은 분야에 응용 가능한 바이오센서의 연구가 활발해지고 있다. 그 중 의료 분야에서, 수소이온 ($H^+$)의 농도 감지는 인간의 질병을 예측하는데 중요한 지표가 되며 이러한 수소이온 ($H^+$) 농도의 변화를 실시간으로 감지하기 위해 반도체를 기반으로 한 다양한 pH 센서가 제안되었다. Ion sensitive field effect transistor (ISFET), electrolyte-insulator-semiconductor (EIS)는 대표적인 반도체 pH센서로, 작은 소자 크기, 견고한 구조, 빠른 응답속도와 CMOS 공정과의 호환성이 좋다는 장점이 있다. 특히, EIS는 제조공정이 간단하고 감지막의 감지 특성 평가가 용이하기 때문에 지속적으로 연구되고 있는 pH 센서이다. 센서의 감지 특성을 평가함에 있어 감지막의 감지감도와 안정성이 우수해야 하며 이를 위해 high-k 물질이 감지막으로 사용되고 있다. 추가적으로 high-k 물질은 기존의 $SiO_2$와 $Si_3N_4$를 대신하여 높은 유전상수로 인한 고성능, 고감도 센서제작을 가능케 한다. 본 연구에서는, high-k 물질인 $HfO_2$, $Ta_2O_5$, $ZrO_2$, $Al_2O_3$를 각각 $SiO_2$ 완충막에 적층한 이단 감지막을 제작하였고, 그 특성을 기존의 $SiO_2$, $Si_3N_4$ 감지막의 감지특성과 비교하였다. pH 감지 특성을 평가해 본 결과, 기존의 $SiO_2$, $Si_3N_4$ 감지막과 비교했을 때 high-k 물질의 감지막을 갖는 EIS pH 센서에서 감지감도와 안정성 모두 우수하게 나타났다. 특히, high-k 물질 중 $HfO_2$에서 감지감도가 다소 크게 평가되었으나, 화학적 용액에 대한 안정성은 떨어졌다. 반면에 $Al_2O_3$과 $Ta_2O_5$은 화학용액에 대한 안정성 측면에서 최적의 특성을 보임을 확인하였다. 결론적으로, high-k 물질에 대한 전반적인 평가를 통하여 높은 pH 감지감도뿐만 아니라 우수한 안정성의 EIS pH 센서를 제작 할 수 있었다.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.138-144
• /
• 2010

In order to investigate the electrochemical propertied of titanium electrode for electrolysis, manganese oxide was electrodeposited on surface of mesh titanium by pulse voltammetry. The morphological changes and impedance results of manganese oxide electrodeposited electrode were analyzed by SEM and EDX. The size of electrodeposited manganese oxide on mesh titanium was increased with first cycle pulse time increase, and approximately 100 non-uniform manganese oxide was grown at 10 ms pulse polarization time. Charge transfer resistance($R_{ct}$) of near the overpotential was analyzed by EIS measurement and the feasibility of prepared electrode was evaluated by the overpotential calculated from Tafel plots.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.110.2-110.2
• /
• 2012

We investigate a cool loop and a dark lane over a limb active region on 2007 March 14 by the Hinode/EUV Imaging Spectrometer (EIS). The cool loop is clearly seen in the EIS spectral lines formed at the transition region temperature (log T = 5.8). The dark lane is characterized by an elongated faint structure in coronal spectral lines (log T = 5.8 - 6.1) and rooted on a bright point. We examine their electron densities, Doppler velocities, and non-thermal velocities as a function of distance from the limb using the spectral lines formed at different temperatures (log T = 5.4 - 6.4). The electron densities of the cool loop and the dark lane are derived from the density sensitive line pairs of Mg VII, Fe XII, and Fe XIV spectra. Under the hydrostatic equilibrium and isothermal assumption, we determine their temperatures from the density scale height. Comparing the scale height temperatures to the peak formation temperatures of the spectral lines, we note that the scale height temperature of the cool loop is consistent with a peak formation temperature of the Mg VII (log T = 5.8) and the scale height temperature of the dark lane is close to a peak formation temperature of the Fe XII and Fe XIII (log T = 6.1 - 6.2). It is interesting to note that the structures of the cool loop and the dark lane are most visible in these temperature lines. While the non-thermal velocity in the cool loop slightly decreases (less than 7 km $s^{-1}$) along the loop, that in the dark lane sharply falls off with height. The variation of non-thermal velocity with height in the cool loop and the dark lane is contrast to that in off-limb polar coronal holes which are considered as source of the fast solar wind. Such a decrease in the non-thermal velocity may be explained by wave damping near the solar surface or turbulence due to magnetic reconnection near the bright point.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.345-356
• /
• 2012

We investigated the changes of fruit quality parameters, polysaccharide contents and cell wall components during maturation and ripening of two Korean pear cultivar 'Hanareum' and 'Manpungbae' compared with 'Niitaka' pear (Pyrus pyrifolia Nakai) which showed different physiological maturity based on days after full bloom (DAFB). Flesh firmness decreased continuously with fruit development and maturation, reaching a final level of 29.4, 33.5, and 27.4N at maturity in 'Hanareum' (127 DAFB), 'Manpungbae' (163 DAFB), and 'Niitaka' (170 DAFB), respectively. The level of ethylene production was very low in early season 'Hanareum' pear which showed at most 0.39 ${\mu}L{\cdot}L^{-1}$ at maturity and no ethylene was detected in 'Manpungbae' and 'Niitaka' at maturity. Fructose was the most abundant soluble sugar during fruit maturation in the pears tested and an increase of sucrose was observed during fruit ripening in the Asian pears commonly. Ethanol insoluble solids (EIS) content decreased gradually with different levels among the pear cultivars as fruit ripens consisted of 10.79, 12.72, and 12.75 $mg{\cdot}g^{-1}$ FW. The amount of total soluble polyuronides was higher in early season cultivars 'Hanareum' than those of mid-season cultivar 'Manpungbae' and 'Niitaka'. In 'Niitaka' which harvested most late season, the level of 4% KOH soluble hemicelluloses was lower than 'Hanareum' and 'Manpungbae' and maintained constantly during fruit ripening period. Cellulosic residues were determined high level in 'Niitaka' which showed 612.33 ${\mu}g{\cdot}mg^{-1}$ EIS at maturity when compared with 'Hanareum' (408.0 ${\mu}g{\cdot}mg^{-1}$ EIS) and 'Manpungbae' (538.67 ${\mu}g{\cdot}mg^{-1}$ EIS). The main constituents of cell wall neutral sugars which consisted of arabinose, xylose, galactose, and glucose were decreased gradually with onset of fruit ripening regardless of cultivar. Arabinose which was predominant in 'Hanareum' pear decreased at the last stage of ripening, but the changes of cell wall neutral sugar during ripening were not occurred in 'Niitaka' pear. The change of molecular mass distribution in water soluble pectin observed dominantly at the early stage of fruit development. Depolymerization of 4% KOH-soluble hemicelluloses and degradation of xyloglucan showed in early-season cultivar 'Hanareum' during fruit maturation, and degradation of those fractions were detected only at the early stage fruit development in mid-season cultivar 'Manpungbae' and 'Niitaka'. The molecular mass profile of CDTA soluble pectin, $Na_2CO_3$-SP and 24% KOH soluble hemicelluloses showed no significant change during fruit maturation regardless of cultivar.