• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.755-760
• /
• 2009

Styrene is broadly used as a polymer and a copolymer and is useful in manufacturing contact lenses due to its high refractive index. This study used styrene with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Measurement of the physical characteristics of the copolymerized material showed that the refractive index is 1.4412 - 1.4628, water content 20 - 35%, visible transmittance 82.6 - 87% and the tensile strength 0.143 - 0.344 Kgf. Also, measurements showed that the refractive index and tensile strength increased while the water content decreased as the ratio of styrene increased. Based on the results of this study, the produced copolymer can be estimated to be suitable for use as a material for high performance functional contact lenses.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.287-294
• /
• 2008

Molecularly imprinted polymer (MIPs) membranes were prepared by UV polymerization to separate racemates with opposite physiological activity, and then its separation selectivity of racemates was carried out. Likewise, their properties were examined. Polycarbonate (PC) membrane was polymerized as small spot form in pore inner wall, but anodisc (AD) membrane was polymerized as film form with thickness 500~700 nm onto the membrane surface. Also the study on the separation selectivity of prepared MIPs membranes was carried out in L-Tryptophane (Trp) racemate solution. The results showed that AD MIPs membrane polymerized as a film form, which was achieved by solution polymerizaion consisting of over 90% cross-linking agent (ethylene glycol dimethacrylate; EGDMA) and under 30% dispersing agent (methanol; MeOH), had predominant 3.5 selectivity.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.305-311
• /
• 2019

The acrylic copolymer was designed and prepared for soft lens with high content. The copolymers were prepared using 2-hydroxyethyl methacrylate(HEMA) as a monomer and ethylene glycol dimethacrylate(EGDMA), glycerol dimethacrylate(GD), or glycerol 1,3-diglycerolate diacrylate (GDD) as a cross linking agent. The water content for high water content lens was 46%, which was higher compared to general purpose of 36%. The contact angle decreased from 38.6 to 34.4, which appears hydrophilic surface. The tensile strength decreased from 0.1 Mpato 0.08, then again to 0.05 as hydrophilic properties of cross linking agents increased. No phase separation was observed in the cross section of lens using scanning electron microscope. The real-time infrared technique was used in photo-polymerization. The initial polymerization rate increased from 0.6 to 0.9, depending on crosslinking agent.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.259-265
• /
• 2006

We polymerized material of AA(Acrylic acid) and BMA(butyl methacrylate) to make up for the weak points of hydrogel contact lens. The synthesis process of silicone synthesis is as follows. Acrylate-PDMS(Polydimethylsiloxane)-Urethane prepolymer was composed after Diisocynate reacted with HEMA(2-hydroxyethylmethacrylate) under the catalyst and it reacted again with bis(hydroxyalkyl) terminated poly(dimethylsiloxane) with high oxygen transmissibility characteristics. HEMA(2-hydroxyethylmethacrylate) was used to make prepolymer that can be polymerized and the urethane was used to improve elasticity and oxygen transmissibility, copolymerization was performed with conventional hydrogel contact lens materials to make silicone hydrogel contact lens with higher oxygen transmissibility. For manufacturing of contact lens, We added BMA(Butyl methacrylate) with better elasticity and flexibility, and AA(Acrylic acid) with higher moisturizing to used contact lens materials. AIBN (Azobis2-methylpropionitrile) as initiator and EGDMA(Ethylene Glycol Dimethacrylat) as crosslinking agent were used and the lens with higher oxygen transmissibility and better moisturizing were manufactured complying with basic contact lens properties, which have several combination trial of each monomer characteristics. Compounding SN which included SILICONE, HEMA, NVP and EGDMA etc was showed by swelling ratio of 9.38% and water content of 23.7%. SN was showed by swelling ratio of 9.38%, water content of 23.7% and a visible ray transmissibility of 89%. SB which added BMA in the SN was showed by swelling ratio of 12.50%, water content of 18.56% and a visible ray transmissibility of 88%. SAB which added both AA and BMA in the SN was showed by swelling ratio of 8.33%, water content of 12.93% and a visible ray transmissibility of 88%.

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.273-278
• /
• 2020

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.250-258
• /
• 2009

One-step seeded polymerization was used to prepare $7{\sim}10{\mu}m$ of crosslinked monodisperse spheres with four crosslinking agents using $4.68{\mu}m$ poly(methyl methacrylate)(PMMA) seed particles in aqueous-alcoholic media in the absence of the swelling process. The crosslinking agents used were ethylene glycol dimethacrylate(EGDMA), allyl methacrylate(AMA), 1,6-hexanediol diacrylate(HDDA) and trimethylolpropane trimethacrylate(TMPTMA). The effects of the type and concentration of the crosslinking agents on the swelling, pore size, thermal property of the networks and morphology of the particles were studied. The chemical structures and concentrations of the crosslinking agents affected both the swelling ratio and the porosity of the networks. In addition, the chemistry of the reactive vinyl group and chain length of the crosslinking agents affected the stability of the monodisperse particles of the ultimate morphology.

• Journal of the Korean Chemical Society
• /
• v.61 no.3
• /
• pp.97-103
• /
• 2017

In this study, the functional hydrogel ophthalmic lens containing tungsten oxide nanoparticles, 2,4-dihydroxy benzophenone and 2-hydroxy-4-(methacryloyloxy) benzophenone were manufactured. HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), AA(acrylic acid), the cross-linker EGDMA (ethylene glycol dimethacrylate), the initiator AIBN (azobisisobutyronitrile) and the functional additives including tungsten oxide nanoparticles, 2,4-dihydroxy benzophenone, and 2-hydroxy-4-(methacryloyloxy) benzophenone were used respectively. The measurements of water content and refractive index of the sample was decreased and increased, respectively. And also, the UV transmittance of produced lens containing 2,4-dihydroxy benzophenone, 2-hydroxy-4-(methacryloyloxy) benzophenone and tungsten oxide nanoparticles was measured. Based on the results of this study, it is judged that the performance improvement increased over time when 2-hydroxy-4-(methacryloyloxy) benzophenone was used as an additive, while the use of tungsten oxide nanoparticles influenced on blue-ray-blocking effect of the hydrophilic lens.

• Journal of Biomedical Engineering Research
• /
• v.8 no.1
• /
• pp.13-28
• /
• 1987

Crosslinked poly(2-hydroxyethylmethacrylate) has been prepared by polymerizing 2-hydroxyethyl methacrylate(HEMA) with crosslinkers such as ehyleng glycol dime- thacrylate(EGDMA), tetraethylene glycol dimethacrylate(TEGDMA), tetraethylene glycol diacrylate(TEGDA), divinyl benzene(DVB), and N, N-methylenebisacry- lamide(MAB) in the presence of initiator $\alpha$ , $\alpha$ -azobisisobutyronitrile at 60。C, The synthesized copolymers were identified by FT-lR spectrophotomether. The swelling properties of the crosslinked copolymers in various solvents such as water, methanol, ethanol, n-propanol, and n-butanol were investigated at different temperatures. The thermal properties of the crosslinked coplymers were also measured by differential scanning calorimetry(DSC) and thermogravimetry(TG)

• Textile Coloration and Finishing
• /
• v.19 no.2
• /
• pp.7-13
• /
• 2007

Photopolymerization of 2-hydroxyethyl methacrylate(HEMA), in the presence of ethyleneglycol dimethacrylate(EGDMA) and 1-Hydroxycyclohexyl phenyl ketone as crosslinker and photoinitiator, respectively, produced crosslinked poly-HEMA hydrogels. The hydrogels were colored by the exhaustion of vinylsul-phone-type reactive dyes. Good colorfastness to laundering was achieved when colored with C.I. Reactive Black 5. We investigated that the effect of coloration on the hydrophilicity and swelling properties of the films. More hydrophilic gel-surfaces were generated with in increase in coloration and crosslinking. Higher surface energy was observed with higher crosslinking level. The more rapid and higher water swellability of poly-HEMA gels after coloration may be resulted from a more opened gel structure by the easier hydration of the hydrophilic sulphonic acid groups of the reacted dyes in water.

• Journal of Integrative Natural Science
• /
• v.13 no.1
• /
• pp.13-18
• /
• 2020

This study used cerium iron hydroxide nanoparticle with HEMA (2-hydroxyethyl methacrylate), the cross-linker EGDMA (ethylene glycol dimethacrylate), NVP (N-vinyl-2-pyrrolidone) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Also, the physical properties of the prepared lenses were compared, and their applicability as polymers for ophthalmic materials was experimented. The results of the measurement showed that the UV blocking rate and the wettability increased with the cerium iron hydroxide nanoparticles addition ratio, and the refractive index and water content were not affected. Thus, the produced copolymer is expected to be useful as a functional contact lens material while satisfying the basic physical properties of the hydrogel contact lens.