• Title/Summary/Keyword: EES

Search Result 81, Processing Time 0.021 seconds

Dynamic Simulation of a Hybrid Cooling System utilizing Heat Pump, Desiccant and Evaporative Cooler (열펌프, 데시칸트 및 증발식 냉각기를 조합한 하이브리드 냉방 시스템의 동특성 해석 연구)

  • Seo, Jung-Nam;Kim, Young-Il;Chung, Kwang-Seop
    • Journal of the Korean Society for Geothermal and Hydrothermal Energy
    • /
    • v.7 no.1
    • /
    • pp.45-50
    • /
    • 2011
  • Hybrid desiccant cooling system(HDCS) consists of desiccant rotor, regenerative evaporative cooler, heat pump and district heating hot water coil. In this study, TRNSYS and EES, dynamic and steady simulation programs were used for studying hybrid desiccant cooling system which is applied to an apartment house from June to August. The results show that power consumption of the hybrid desiccant cooling system is 70 kWh in June, 199 kWh in July and 241 kWh in August. Sensible and latent heats removed by the hybrid desiccant cooling system are 300 kWh, 301 kWh in June, 610 kWh, 858 kWh in July and 719 kWh, 1010 kWh in August. COP of the hybrid desiccant cooling system is 8.6 in June, 7.4 in July and 7.2 in August. COP of the hybrid desiccant cooling system decreases when latent heat load increases. Operation time of the system is 70 hours in June, 190 hours in July and 229 hours in August. Since the cooling load is largest in August, the operation time of August is longest for maintaining the indoor temperature at $26^{\circ}C$. Due to the characteristics of hybrid desiccant cooling system for efficiently handling both sensible and latent loads, this system can handle sensible and latent heat loads efficiently in summer.

The research regarding 'Game system does simulation Phisical Phenomenon that happen on the earth' at online games (온라인게임상에 '지구환경의 물리적 현상을 시뮬레이션 한 게임 시스템'에 관한 연구)

  • Lee, Ji-Won;Cho, Sam-Ha;Kyung, Byung-Pyo
    • Journal of Korea Game Society
    • /
    • v.4 no.1
    • /
    • pp.26-33
    • /
    • 2004
  • OlineGame Player suffers very big impact in environment of game World. Therefore, physical environment that is embodied to Gameworld is truth and immersion important element that experience to Player. Also, Game-System that embodied physical environment influences in Game Play can give more game player truth and immersion. I mainly MMORPG that is serviced present in this study investigated. 'What earth habitat factor was embodied and What influence does embodied earth habit at factor exert on game play'. I searched what problem is to design game system that do earth environment simulation. And I asserted development of environment information system to approach game system that do earth environment simulation by easier method. Environment information system is system that process status information of stand-by status, wind, wind speed, topography etc.. of game World.

  • PDF

Energy Expenditure of Male Blue Collar Workers (생산직 남성근로자의 작업 중 에너지 소모량)

  • Woo, Ji Hoon;Kang, Dongmug;Shin, Yong Chul;Kim, Myeong Ock;Son, Min Jung;Kim, Boo Wook;Cho, Byung Mann;Lee, Su Ill
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.16 no.2
    • /
    • pp.183-192
    • /
    • 2006
  • Predicting energy expenditure (EE) is important to prevent work-related musculoskeletal disorders (WMSDs). The problem to predict EE is that the standard of EE is based on western data. The authors checked average EE by job categories to provide basic data for suggesting proper work intensity for Korean workers. This study was conducted from 2003 to 2005. Study subjects were recruited from 4 car parts assembly plant, 2 car assembly plant, 2 Heavy machine manufacturing plant and 2 shipyards. Total study subjects were 515 male workers. To estimate VO2max, sub-maximal test was conducted to measure VO275%max by bicycle ergometer (Combi Co, Aerobike 75XL II). Heartbeats were recorded with heartbeat recorder (Polar Electro Co, Finland, S810) during work. EE of work was calculated by recorded heartbeat and individual regression equation which was derived from sub-maximal test. Subjects were classified into 4 industry and 8 work posture, 23 job task categories. Mean EEs (S.D.) according to industry classification (kcal/min) were 4.9 (0.7), 4.8 (0.7), 4.9 (0.7), 5.0 (0.9), and 4.0 (0.5) for Car Part manufacture, Car Assembly, Ship Building, Heavy Machinery Manufacture, and Hospital Office, respectively. The results suggest that Korean male workers of exceeding to the NIOSH criteria will be needed to plan for job rescheduling to maintain $worker^{\circ}$Øs health. Further study to establish Korean work intensity standard would be needed.

The Analysis of Effect in Order to Consider Combined Heat and Power Capacity in the Basic Plan of Long Term Electricity Supply & Demand (전력수급기본계획에 열병합발전 설비 반영시의 효과분석에 관한 연구)

  • Kim, Yong-Ba;Moon, Jung-Ho;Yeon, Jun-Hee;Jung, Hyun-Sung;Woo, Sung-Min;Kim, Mi-Ye
    • Journal of Energy Engineering
    • /
    • v.16 no.1 s.49
    • /
    • pp.22-31
    • /
    • 2007
  • This paper addresses methodology in order to consider CHP (Combined Heat and Power) capacity in the Basic Plan of Long Term Electricity Supply & Demand and presents effects on it. The method performs state in extent that do not change maximum in the Basic Plan of Long Term Electricity Supply & Demand. For analysis that occurs some advantage this method compares with Basic Plan of Long Term Electricity Supply & Demand. It includes EES (Expected Energy Served), Fuel consumption, amount of $CO_{2}$ emission reduction.

A Comparison of EMG Activity for Long and Lateral Heads of Triceps Brachii Muscles According to Exercise and Forearm Positions During Triceps Strengthening Exercises (삼두근 근력 운동 시 운동 자세와 전완 자세에 따른 삼두근 장두와 외측두의 근 활성도 비교)

  • Kim, Si-Hyun;Lee, Won-Hwee;Ha, Sung-Min;Park, Kyue-Nam;Kwon, Oh-Yun
    • Physical Therapy Korea
    • /
    • v.18 no.1
    • /
    • pp.28-36
    • /
    • 2011
  • The aim of this study was to compare electromyography activity for long and lateral heads of triceps brachii muscle according to forearm positions during different triceps strengthening exercises. The muscle activities for long and lateral head of triceps brachii were measured by surface electromyography. Fifteen healthy volunteers participated for this study and performed elbow extension in three different elbow extension exercises (elbow extension in a supine position; EES, elbow extension with shoulder abduction at 90 degrees in a prone position; EESA, and elbow extension with one arm at the side of the trunk in a prone position; EESP) and forearm positions (supination, neutral, and pronation). A two-way repeated measures ANOVA was used to compare the effects of the exercise positions and forearm positions. The EMG activities of the long head of the triceps brachii increased significantly during EESP with forearm supination, whereas the activity of the lateral head of the triceps brachii increased significantly during EESA with the forearm in a neutral position (p<.05). The results of this study suggest that exercise positions and forearm positions should be considered for selectively strengthening the long and lateral heads of triceps brachii muscles.

Simulation for Performance Analysis of a Grain Cooler (곡물냉각기의 성능해석을 위한 시뮬레이션)

  • 박진호;정종훈
    • Journal of Biosystems Engineering
    • /
    • v.26 no.5
    • /
    • pp.449-460
    • /
    • 2001
  • This study was carried out to develop a simulation model with EES(Engineering equation solver) for analyzing the performance of a grain cooler. In order to validate the developed simulation model, several main factors which have affected on the performance of the gain cooler were investigated through experiments. A simulation model was developed in the standard vapor compression cycle, and then this model was modified considering irreversibe factors so that the developed alternate model could predict the actual cycle of a grain cooler. The compressor efficiency in vapor compression cycle considering irreversibility much affected on the coefficient of performance(COP). The COP in the standard vapor compression cycle model was greatly as high as about 6.50, but the COP in an alternative model considering irreversibility was as low as about 3.27. As a result of comparison between the actual cycle and the vapor compression cycle considering irreversibility, the difference of pressure at compressor outlet(inlet) was a little by about 48kPa (8.8kPa), the temperatures of refrigerant at main parts of the grain cooler were similar. and the temperature of chilled air was about 8$\^{C}$ in both. The model considering irreversibility could predict performance of the grain cooler. The theoretical period required to chill grain of 1,383kg from the initial temperature 24$\^{C}$ to below 11$\^{C}$ was about 55 hours 30 minutes, and the actual period required in a grain bin was about 58 hours. The difference between the predicted and an actual period was about 2 hours 30 minutes. The cooling performance predicted by the developed model could well estimate the cooling period required to chill the grain.

  • PDF

A Case Report of Hyungbangdojeock-san on Daytime sleepiness Diagnosed as Soyangin Type (주간 졸림을 호소하는 소양인(少陽人) 환자에 대한 형방도(荊防導) 적산(赤散) 치험 1례)

  • Jeon, Gyu-Ri;Yim, Tae-Bin;Choi, Jeong-Woo;Kim, Ha-Ri;Park, Seong-Uk;Park, Jung-Mi;Ko, Chang-Nam;Cho, Seung-Yeon
    • The Journal of the Society of Stroke on Korean Medicine
    • /
    • v.21 no.1
    • /
    • pp.47-56
    • /
    • 2020
  • This case study is to report the effectiveness of Hyungbangdojeock-san in the treatment of daytime sleepiness. The patient was diagnosed as a Soyangin, one of the 4 constitution types in Korean medicine, and treated with herbal medicine, Hyungbangdojeock-san and acupuncture treatment for 14 days. The severity of symptom was assessed using Epworth Sleepiness Scale (ESS). After treatment, the severity of daytime sleepiness was reduced. ESS score was decreased from 11 to 2. As a result this case showed the effect of Hyungbangdojeock-san on daytime sleepiness.

  • PDF

Performance Analysis on View Synthesis of 360 Videos for Omnidirectional 6DoF in MPEG-I (MPEG-I의 6DoF를 위한 360 비디오 가상시점 합성 성능 분석)

  • Kim, Hyun-Ho;Kim, Jae-Gon
    • Journal of Broadcast Engineering
    • /
    • v.24 no.2
    • /
    • pp.273-280
    • /
    • 2019
  • 360 video is attracting attention as immersive media with the spread of VR applications, and MPEG-I (Immersive) Visual group is actively working on standardization to support immersive media experiences with up to six degree of freedom (6DoF). In virtual space of omnidirectional 6DoF, which is defined as a case of degree of freedom providing 6DoF in a restricted area, looking at the scene at any viewpoint of any position in the space requires rendering the view by synthesizing additional viewpoints called virtual omnidirectional viewpoints. This paper presents the performance results on view synthesis and their analysis, which have been done as exploration experiments (EEs) of omnidirectional 6DoF in MPEG-I. In other words, experiment results on view synthesis in various aspects of synthesis conditions such as the distances between input views and virtual view to be synthesized and the number of input views to be selected from the given set of 360 videos providing omnidirectional 6DoF are presented.

Anodically prepared TiO2 Micro and Nanostructures as Anode Materials for Lithium-ion Batteries (양극산화를 사용한 TiO2 마이크로/나노 구조체 제조 및 리튬 이온 전지 음극재로의 응용 연구)

  • Kim, Yong-Tae;Choi, Jinsub
    • Applied Chemistry for Engineering
    • /
    • v.32 no.3
    • /
    • pp.243-252
    • /
    • 2021
  • With increasingly strict requirements for advanced energy storage devices in electric vehicles (EVs) and stationary energy storage systems (EES), the development of lithium-ion batteries (LIBs) with high power density and safety has become an urgent task. Because the performance of LIBs is determined primarily by the physicochemical characteristics of its electrode material, TiO2, owing to its excellent stability, high safety levels, and environmentally friendly properties, has received significant attention as an alternative material for the replacement of commercial carbon-based anode materials. In particular, self-organized TiO2 micro and nanostructures prepared by anodization have been intensively investigated as promising anode materials. In this review, the mechanism for the formation of anodic TiO2 nanotubes and microcones and the parameters that influence their morphology are described. Furthermore, recent developments in anodic TiO2-based composites as anode electrodes for LIBs to overcome the limitations of low conductivity and specific capacity are summarized.

Clinical Outcomes and Prognosis of Patients with Stent Fracture after Successful Drug-Eluting Stent Implantation (관상동맥 약물 방출 스텐트 삽입 후 스텐트 골절에 대한 임상결과 및 예후)

  • Kim, In-Soo;Han, Jae-Bok;Jang, Seong-Joo
    • Journal of radiological science and technology
    • /
    • v.37 no.2
    • /
    • pp.109-116
    • /
    • 2014
  • Many studies have suggested that in the era of Drug-Eluting Stents(DES) are one of the causes of In-Stent Restenosis(ISR) of Stent Fracture(SF). The present study sought to evaluate clinical characteristics of patients with stent fracture after successful DES implantation. The 4,701 patients were selected for analysis who underwent a follow-up coronary angiography irrespective of ischemic symptoms. The overall incidence of SF was 32 patients(male:female=19:13, Av. age $62.44{\pm}9.8$year, 0.68%). Fractures of Sirolimus-Eluting Stents(SES), Paclitaxel-Eluting Stents(PES), Biolimus A9-Eluting Stents(BES), Everolimus-Eluting Etents(EES), Endothelial Progenitor Cell Capture Stent(EPC) and Zotarolimus-Eluting Stents(ZES) are accounted for 19(59.4%), 9(28.1%), 2(6.3%), 1(3.1%), 1(3.1%) and 0(0%) respectively. SF developed in the left Anterior Dscending(LAD) artery in 16 patients(50%) and in complex(type B2, C) lesions in 25 patients(69.4%). Ten patients were treated with heterogenous DES, the rest being treated with either homogenous DES(3 patients), plain old balloon angioplasty(3 patients), or conservative medical treatment(17 patients). None of the patients with SF suffered from cardiac death during a follow-up period of $32.9{\pm}12.4$ months. The overall rate of DES fracture over up to 3.7 years of follow-up was 0.68% with higher incidence in SES than in PES. SF frequently occurred in the LAD artery and in complex lesions. Of the patients with SF, coronary intervention was performed only when the binary restenosis lesion was significant. During the follow-up, patients with SF have continued on combination antiplatelet therapy. There is a very low rate of major adverse cardiac events(post-detection of SF), especially cardiac death associated with SF.