• Restorative Dentistry and Endodontics
• /
• v.43 no.1
• /
• pp.11.1-11.10
• /
• 2018

Objectives: This study aimed to introduce the use of laser-induced breakdown spectroscopy (LIBS) for evaluation of the mineral content of root canal dentin, and to assess whether a correlation exists between LIBS and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) methods by comparing the effects of irrigation solutions on the mineral content change of root canal dentin. Materials and Methods: Forty teeth with a single root canal were decoronated and longitudinally sectioned to expose the canals. The root halves were divided into 4 groups (n = 10) according to the solution applied: group NaOCl, 5.25% sodium hypochlorite (NaOCl) for 1 hour; group EDTA, 17% ethylenediaminetetraacetic acid (EDTA) for 2 minutes; group NaOCl+EDTA, 5.25% NaOCl for 1 hour and 17% EDTA for 2 minutes; a control group. Each root half belonging to the same root was evaluated for mineral content with either LIBS or SEM/EDS methods. The data were analyzed statistically. Results: In groups NaOCl and NaOCl+EDTA, the calcium (Ca)/phosphorus (P) ratio decreased while the sodium (Na) level increased compared with the other groups (p < 0.05). The magnesium (Mg) level changes were not significant among the groups. A significant positive correlation was found between the results of LIBS and SEM/EDS analyses (r = 0.84, p < 0.001). Conclusions: Treatment with NaOCl for 1 hour altered the mineral content of dentin, while EDTA application for 2 minutes had no effect on the elemental composition. The LIBS method proved to be reliable while providing data for the elemental composition of root canal dentin.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.106-113
• /
• 2017

Purpose: The purpose of this study was to evaluate tissue dissolving capacity, antimicrobial effect of Hydroxyethylidene bisphosphonate (HEBP) interacting with sodium hypochlorite (NaOCl), Ethylenediaminetetraacetic acid (EDTA) as conventional endodontic irrigants and to determine tissue dissolving efficacy depended on temperature. Materials and Methods: A total of 80 bovine muscles were randomly distributed into 8 groups (n = 10). After their initial weights determined on a precision scale, the specimens in each group were immersed in the solutions for 5, 10 and 15 min and reweighted at each time period. Agar diffusion test inoculated with Enterococcus faecalis was performed for antimicrobial effect of each endodontic irrigants. Results: The ability to dissolve organic matter was greater in NaOCl group following NaOCl and HEBP mixture. Heated NaOCl ($40^{\circ}C$) and NaOCl/ HEBP mixture was greater tissue dissolving efficacy than room temperature ($25^{\circ}C$). Antimicrobial effect was greater and significant in the following order EDTA > EDTA + 1% NaOCl > $1%\;NaOCl{\geq}1%\;NaOCl$ + HEBP. Conclusion: HEBP as soft chelating agent does not disturb antimicrobial effect and less affected tissue dissolving efficacy as inherent properties of NaOCl. In the heated NaOCl/HEBP mixture analyzed, it dissolved more the organic matter than room temperature.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.3
• /
• pp.105-110
• /
• 2013

ZnS thin films were prepared on glass substrate by using chemical bath deposition method. The influence of ammonia ($NH_4OH$) and $Na_2EDTA$ ($Na_2C_{10}H_{16}N_2O_8$) as complexing agents on structural and optical properties of ZnS thin films were investigated. Zinc acetate dihydrate ($Zn(CH_3COO)_2{\cdot}2H_2O$) and thiourea ($H_2NCSNH_2$) were used as a starting materials and distilled water was used as a solvent. All ZnS thin films, regardless of a kind of complexing agents, had the hexagonal structure (${\alpha}$-ZnS) and had a preferred <101> orientation. ZnS thin films, with 4 M ammonia and with 4 M ammonia and 0.1 M $Na_2EDTA$, had the highest <101> peak intensity. In addition, their average particle size are 280 nm and 220 nm, respectively. The average optical transmittances of all films were higher than 60% in the visible range. The optical direct band gap values of films were about 3.6~3.8 eV.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.189-197
• /
• 1994

Analytic methods for Cr(VI) level in industrial hygienic field were suggested by the National Institute for Occupational Safety and Health(NIOSH method 7600, 7604). There were growing needs for measurement of Cr(III) and Cr(VI) levels simultaneously. Two analytical methods were suggested to determine Cr(III) and Cr(VI) levels simultaneously. The one is method by using reversed phase high peformance liquid chromatography(HPLC) and the other is by using ion exchange HPLC. The purpose of this work was to evaluate the usefulness of these two analytic methods. For the difference of ionic charges of Cr(III)-ethylendiamine tetraacetic acid(EDTA) chelate and $CrO_4{^-2}$, we could detect them simultaneously by ion exchange HPLC. Also, we attempted to determine the levels of Cr(III) and Cr(VI) chelated with sodium diethyldithiocarbamate(NaDDTC) by using reversed phase HPLC. The confirmation of Cr(III) and Cr(VI) were checked by fraction collector and nameless atomic absorption spectrometer. The optimal conditions for the formation of Cr(III)-EDTA chelate were two hours incubation period with pH 5. Cr(III)-EDTA and Cr(VI) in EDTA solution were successfully separated by anion exchange column using $Na_2CO_3/NaOH$ mixture as mobile phase. Peaks of Cr(III)-EDTA and Cr(VI) in EDTA were identified at 5 minutes and 7 minutes of retention time respectively by the ion exchange HPLC. The formation of Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates were twelve hours incubation period. Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates were separated by reversed phase column using methanol and water mixture as mobile phase. Peaks of Cr(VI)NaDDTC and Cr(III)-NaDDTC chelates were identified at 13 minutes and 26 minutes of retention time respectively by the reversed phase HPLC. Due to reduction of Cr(VI) to Cr(III), it seems to be not suitable for simultaneous determination of Cr(III)-NaDDTC and Cr(VI)-NaDDTC chelates by reversed phase HPLS. Simultaneos determination of Cr(III) and Cr(VI) by ion exchange HPLC was more accurate and simple method.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.51-56
• /
• 1994

Development for extraction method of sea tangle was investigated with addition of sucrose, NaCl, EDTA-2Na, SHMP, and hydrolysis with commercial polysaccharide hydrolyzing enzymes. The total solids and protein yields were significantly increased by enzymatic hydrolysis or addition of NaCl and EDTA-2Na during boiling. The extract prepared by enzymatic hydrolysis followed by 2 hrs of boiling in 1.5% NaCl solution was significantly improved in solids and protein yield from 24.1% and 13.9% of 2 hrs of water boiling to 44.6% and 32.2%, respectively. The combined method increased the amino-nitrogen content but reduced the turbidity and viscosity. Extracts with a high intensity of total and seaweed-like taste as revealed by sensory evalution were obtained by combined method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.291-296
• /
• 1997

The dietary fiber contents of seaweeds including Drown algae (Undaria pinnatifida, Laminaria japonica, Hizikia fusiforme), red algae (Gelidium amansii, Gracilaria verrucosa) and green algae (Ulva lactuca) and the extraction condition of the fiber was investigated. The dietary fiber contents of Undaria pinnatifida, Laminaria japonica, Hizikia jusiforme, Gelidium amansii, Gracilaria verrucosa and Ulva lactuca were $47.2\%,\;50.7,\;42.6\%,\;48.8\%,\;44.5\%\;and\;40.0\%$, respectively. It was effective to extract soluble dietary fiber with sodium salts such as disodium carbonate and disodium EDTA in brown algae. In red algae, it was effective to extract soluble dietary fibre with disodium EDTA. Also, the extraction time and temperature affected the yields of dietary fiber.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.44-50
• /
• 1994

In order to develop an effective extraction method of sea mustard, five different methods of boiling in 0.5% $Na_{2}EDTA(A)$, in 0.1 N HCI(B), in 0.5% $Na_{2}EDTA$ and 0.1 N HCI(C) and hydrolysis with two different polysaccharides-hydrolyzing enzymes of Celluclast(method D) and Ultrazyme(method E) prior to boiling in 0.5% $Na_{2}EDTA$ and 0.1 N HCI were studied. The highest yields of solids(63.14%) and protein(26.39%) from the extract were obtained by method D. The concentration of amino-N was significantly improved by method C(870 ppm) followed by method D(770 ppm), B(570 ppm) and A(480 ppm) compared to the control(270 ppm). Total free amino acids, mainly alanine, glutamic, and aspartic acids, were greatly increased by methods of A(8.88 mg%), D(4.14 mg%) and E(4.18 mg%) which were $2.5{\sim}5.1$ times higher than those in control(1.71 mg%). The sensory characteristics showed that extract D was significantly low in intensity of fishy odor and high in seaweed taste. Therefore, method D was suggested as the effective extraction method.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.51-60
• /
• 1996

Removal of Mn-EDTA complex and fluoride by use of hematite and ferrite, which are the by-product to be disposed of as industrial wastes, was investigated. For the comparison of removal rate, Na-bentonite known as excellent absorbent of inorganic contaminants was included in the experiments. As the results of batch mode experiments, for manganese, ferrite-A revealed 48∼65% of removal capacity, ferrite-B 46∼57%, hematite 17∼26%, while Na-bentonite showed 10∼23% of removal, depending on the initial concentration. Meanwhile, in case of fluoride : hematite revealed 53 ∼63% of removal : ferrite-A 54∼63 %, while ferrite-B did 20∼38 %. From the results, it can be postulated that the capacity of hematite and ferrite to attenuate inorganic pollutants, especially when they form complex ions, is superior to that of Na-bentonite. Consequently, the mixing of such oxide minerals with Na-bentonite will reinforce the function of Na-bentonite, especially in the undergroud liner aspect.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.379-390
• /
• 1998

In endodontic treatment, calcium hydroxide has been used as intracanal medicament. Although calcium hydroxide should be removed thoroughly before permanent root canal filling, no effective method for its removal has been reported. Because of irregularity of root canal walls, root curvatures and anatomic variations, it is insufficient to remove calcium hydroxide from the canal wall only by mechanical instrumentation Considering the chemical effects of irrigants on calcium hydroxide, $Ca^{++}$ dissolving effect from two calcium hydroxide products is investigated, using dis- tilled water, NaOCl, citric acid and EDTA. Vitapex$^{(R)}$ 0.1g and calcium hydroxide 0.03g were dissolved in distilled water, 5% NaOCl, 50% citric acid and 17% EDTA respectively, at 1, 3, 5, 10min. time interval. The solution was filtered using filter paper(pore size $5{\mu}m$) and $Ca^{++}$ concentration was determined by ion chromatography. The result were as follows : 1. Distilled water, NaOCl, citric acid and EDTA abstracted more $Ca^{++}$ from calcium hydroxide than Vitapex$^{(R)}$ except NaOCl 1, 5, 10 time interval. 2. EDTA and citric acid abstracted more $Ca^{++}$ from Vitapex$^{(R)}$ and calcium hydroxide than distilled water or NaOCl. The overall result support the view that water-based calcium hydroxide product is easily removed than oil-based calcium hydroxide product and EDTA, citric acid are more effective in $Ca^{++}$ elution than NaOCl or distilled water.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.11 no.1
• /
• pp.1-12
• /
• 1985

A strain of Pseudomonas aeruginosa was isolated from the spoiled product and its characteristics on various formaldehyde-releasing preservatives were investigated. This strain, P. aeruginosa FR, could utilize 1.0% of imidazolidinyl urea and 0.2% of DMDM hydantoin as a sole carbon and nitrogen source in the minimal salts medium. With the growth of the strain in minimal salts medium containing imidazolidinyl urea, formic acid was initially accumulated according to the decrease of formaldehyde concentration. It was suggested that formaldehyde dehydrogenase was involved in this oxidation process and could catalyze formaldehyde, imidazolidinyl urea, DMDM hydantoin and quaternium-15, but not bronopol. MICs of this strain to each preservation were 0.03% in formaldehyde, 1.0% in imidazolidinyl urea, 0.2% in DMDM hydantoin, 0.2% in quaternium-15 and 0.1% of EDTA-2Na. But the MICs were diminished about ten times when 0.01% of EDTA-2Na was added to the preservative systems. In actual challenge test, the eyeliner and the pack which contained paraben and imidazolidinyl urea were not able to be protected from this strain, but when 0.05% EDTA-2Na was added the products were sufficiently preserved.