• Clinical and Experimental Reproductive Medicine
• /
• 제29권1호
• /
• pp.13-20
• /
• 2002

Objective: This study was carried out to establish the effectiveness of the vitrification method and the optimal cryoprotectants in the cryopreservation of human embryonic stem cells (ESC). Materials and Methods: Human ESC clumps established at Seoul National University Hospital (SNUhES 1) were cryopreserved with the vitrification method using the EM grid. EDS and EFS40 were used as vitrification solutions. Results: Between the EDS and EFS40 groups, there was no significant difference in the recovery rate after cryopreservation of human ESC. The formation rates of ESC colonies in the vitrified groups were significantly lower than those in the control ESC group (p<0.05, p<0.05). In addition, the formation rate of ESC colonies in the EDS group was significantly higher than that in the EFS40 group (p<0.05). The ESC colonies in the vitrified groups were significantly smaller after culture duration of 2 and 4 days, respectively, compared with the control ESC group (p<0.1, p<0.05). However, these effects could be reduced to nonsignificant level by the additional culture of ESC colonies. The vitrified human ESC retained the properties of pluripotent cells, including the expression of cell surface. markers for the undifferentiated cells such as alkaline phosphatase and SSEA-4 (stage-specific embryonic antigen-4), and the expression of transcription factor Oct-4 (octamer-binding transcription factor-4), and the normal karyotype. Conclusion: The vitrification method using the EM grid and EDS solution was confirmed to be very effective for the cryopreservation of human ESC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2369-2373
• /
• 2001

Usually the static scheduling algorithms such as DMS (Deadline Monotonic Scheduling) or RMS(Rate Monotonic Scheduling) are used for CAN scheduling due to its ease with implementation. However, due to their inherently low utilization of network media, some dynamic scheduling approaches have been studied to enhance the utilization. In case of dynamic scheduling algorithms, two considerations are needed. The one is a priority inversion due to rough deadline encoding into stricted arbitration fields of CAN. The other is an arbitration delay due to the non-preemptive feature of CAN. In this paper, an extended algorithm is proposed from an existing EDS(Earliest Deadline Scheduling) approach of CAN scheduling algorithm haying a solution to the priority inversion. In the proposed algorithm, the available bandwidth of network media can be checked dynamically by all nodes. Through the algorithm, arbitration delay causing the miss of their deadline can be avoided in advance. Also non real-time messages can be processed with their bandwidth allocation. The proposed algorithm can achieve full network utilization and enhance aperiodic responsiveness, still guaranteeing the transmission of periodic messages.

• 한국가축번식학회지
• /
• 제23권1호
• /
• pp.85-92
• /
• 1999

본 연구는 동결동결보호제의 종류와 배발달단계가 생쥐의 OPP vitrification 동결방법에 미치는 영향을 알아보고자 실시하였다. 동결속도, 동결보호제 및 배발달단계는 vitrification 방법에 따른 수정란의 생존성에 영향을 미칠 수 있다. 본 연구에 사용된 동결보존액은 40% (v/v) ethylene glycol, 18% (w/v) Ficoll, 0.3 M sucrose와 5% FCS가 첨가된 D-PBS (EFS) 및 16.5% ethylene glycol, 16.5% dimethyl sulfoxide, 0.5 M sucrose 와 5% D-PBS (EDS)을 이용하였다. 배반포기배는 hCG 처리후 90시간째에 자궁으로부터 채취하여 실험 1에 이용하였고, 실험 2와 3에서는 zygote 를 hCG 처리후 18시간에 난관에서 채취하여 mHTF 배양액에 5% $CO_2$, 37$^{\circ}C$ 조건하에 배양하면서 2-, 4-, 8-cell, compacted morula, 또는 blastocyst를 이용하였다. 실험 1에서 배반포기배의 적당한 동결보존액을 결정하기 위하여 EFS 또는 EDS로 OPP vitrification 을 실시하였다. 재확장배반포기에 의한 생존율은 대조군과 EDS 처리군 (100, 100%) 이 EFS 군 (95.0%) 보다 유의적 (P＜0.05)으로 높게 나타났으나, 부화배반포기에서는 EFS 군 (90.0%) 이 대조군 (100%) 및 EDS 군 (95.0%) 보다 유의적으로 낮은 발달율을 보였다. 실험 2에서는 zygote, 2-, 4-, 8-cell, 상실배 빛 배반포기 등의 초기배에서도 OPP vitrification 동결방법이 적당한지를 판단하기 위하여 실시하였다. Zygote (70.0%) 는 동결융해 후 배발달율이 2, 4, 8, 상실배 및 배반포기배에 비하여 유의적으로 낮은 발달율을 보였다 (89.7, 90.0, 92.8, 97.6 및 97.5%) (P＜0.05). 또한 동결융해란의 할구수에서는 대조군 및 배반포기배 (35.7$\pm$2.98 및 39.6$\pm$2.81)에서 zygote, 2-, 4- 8-cell, 상실배 (29.8$\pm$3.21, 31.3$\pm$3.83, 29.3$\pm$3.58, 28.9$\pm$3.21 및 30.8$\pm$2.93) 보다 유의적으로 높게 나타났다 (P＜0.05) 실험 3에서는 zygote의 VS1 에 노출시간에 따른 생존율을 조사한 결과 융해후 2-cell (91.6, 88.5 및 88.9%) 및 배반포기 (83.3, 74.3 및 69.4%) 까지 배발달율은 1,2 및 3분간의 노출시간에 따른 유의적인 차이를 보이지 않았다. 또한 융해후 노출시간에 따른 할구수에서도 유의적인 차이를 보이지 않았다 (36.4$\pm$4.76, 32.4$\pm$4.67 및 27.6$\pm$4.52). 이상의 결과에서 OPP vitrification 방법은 EFS 또는 EDS 동결보존액에 따른 유의적인 차이 없이 이용될 수 있는 것으로 판단된다. 배발달단계에 따른 생존율은 zygote 의 초기배는 2, 4, 8, 상실배 및 배반포기보다 유의적으로 저조한 생존율을 보였다. Zygote의 VS1에 노출시간에 따른 생존율도 1 분간의 노풀시간에서 높은 배발달율을 보였다. OPP vitrification 동결보존방법으로 생쥐수정란의 동결보존에 유용하게 이용가능한 것으로 판단된다.

• Corrosion Science and Technology
• /
• 제16권5호
• /
• pp.247-256
• /
• 2017

The feasibility of using hydrazine for inhibiting pitting corrosion in copper sprinkler tubes was investigated by examining microscopical and structural evolution of corrosion by-products with SEM, EDS, and XRD. Hydrazine removed dissolved oxygen and reduced CuO and $Cu_2O$ as well. The stable phase was changed from CuO to $Cu_2O$ or Cu depending on hydrazine concentration. Hydrazine concentration of 500 ppm could convert all CuO corrosion by-products to $Cu_2O$. In a tightly sealed acryl tube filled with aqueous solution of 500 ppm hydrazine, octahedral $Cu_2O$ particles were formed while plate-like structures with high concentration of Cu, O, N and C were formed near a corrosion pit. The inside structure of a corrosion pit was not altered by hydrazine aqueous solution. Uniform corrosion of copper was almost completely stopped in aqueous solution of 500 ppm hydrazine. Corrosion potential of a copper plate was linearly dependent on log (hydrazine concentration). The concept of stopping pitting corrosion reaction by suppressing oxygen reduction reaction could be verified by applying this method to a reasonable number of real sprinkler systems before full-scale application.

• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.145-153
• /
• 2012

Purpose: The purpose of this study was to investigate to effect of the electro-polishing condition according to electrolyte temperature and current and polishing time on surface morphology and composition by scanning electron microscopy(SEM) and energy dispersive X-ray spectrometer(EDS) in dental casting Co-Cr-Mo alloys. Methods: 16 specimens were divided into 4 groups which have each 4 specimens. The size of specimens were 10mm wide and 5mm height. the electro-polishing of specimens are by polishing solution temperature and times in Co-Cr-Mo alloy by SEM and EDS analysis. Results: The results shows that most smooth surface is obtained when electro-polishing is performed at $49^{\circ}C$ for 30-40sec with electro gap of 10mm and 8 voltage. Conclusion: The morphologies of specimens after electro-polishing were scratch absent and significant between at $40^{\circ}C$ for 45sec and at $49^{\circ}C$ for 45sec.

• 폴리머
• /
• 제37권6호
• /
• pp.677-684
• /
• 2013

Alginate를 농도 별로 용액상태로 제조한 후 필름 메이커를 이용하여 필름 형태로 만든 후 3 wt%의 $ZnCl_2$ 수용액에 필름을 고화시킨 후 수세하여 $60^{\circ}C$의 건조기에서 약 20분 동안 건조시켜 zinc alginate 필름을 제조하였다. 필름의 특성을 조사하기 위하여 항균성 및 점도와 FTIR, TGA, SEM, EDS 및 접촉각, 인장측정, 용해도분석 등을 측정하였다. 항균성 시험 결과, zinc alginate 필름에서는 두 균주(포도상구균, 폐렴간균) 모두 우수한 항균력이 나타나는 것을 확인하였다. 9 wt%의 sodium alginate로 제조한 zinc alginate 필름의 표면은 다른 농도별 필름보다 균일한 형태를 나타내었으며, $ZnCl_2$ 응고액에 잘 고화될 때 단단하고 거친 느낌의 단면 형태를 확인하였다. Zinc alginate 필름의 인장강도는 가교결합에 의해 sodium alginate 용액의 농도가 증가함에 따라 증가하였으며, 초기 열 분해 온도가 점차적으로 높아지고 있는 형태를 보였다.

• 대한산업공학회지
• /
• 제25권3호
• /
• pp.290-297
• /
• 1999

In interior point methods for linear programming, we must solve a linear system with a symmetric positive definite matrix at every iteration, and Cholesky factorization is generally used to solve it. Therefore, if Cholesky factorization is not done successfully, many iterations are needed to find the optimal solution or we can not find it. We studied methods for improving the numerical stability of Cholesky factorization and the accuracy of the solution of the linear system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1989년도 가을 학술발표회 논문집
• /
• pp.25-30
• /
• 1989

In this paper, morter and concrete specimens made with four cements were immersed in Mgcl2, MgSO4 Solution and artifical Seawater which was corresponded with Seawater. The hydration products of immersed cement pastes were looked over by using SEM, EDS and X-ray diffraction method. The results show that the concrete made with domestic flyash cement and blast-frrnace slag cement is superior to that of ordinary portland cement in resistance to chloride and sulphate solution. Especially, it is found that the attack of Cl-ion on the concrete plays an important role of the deterioration of concrete.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.27-29
• /
• 2003

Solution-based MOD-TFA deposition technology of YBCO layers offers a route to low-cost YBCO coated conductors. Since the structures and properties of grown thin film by MOD process are strongly influenced by chemistry of precursor solution, the chemical modification of precursor solution for MOD process are important for improvement of the electrical properties of YBCO films. In this study, the precursor solution for MOD process are modified by chemical additives and solvents. The microstructure and texture of YBCO films grown by chemically modified precursor solution were characterized with SEM/EDS, XRD.

• 자원환경지질
• /
• 제52권6호
• /
• pp.595-604
• /
• 2019

본 연구 목적은 비-가시성 금 정광을 마이크로웨이브-질산용출 시키고, 여과지를 이용하여 금을 단순하게 얻고자 하였다. 본 실험에서 사용된 시료의 경우 질산농도별로 마이크로웨이브-질산용출실험을 수행한 결과 Fe, Te, Ag 등은 완전용출(100%) 되었지만, Au는 용해되지 않았다. 용출용액을 3장의 여과지로 여과하여 SEM/EDS 분석한 결과 첫 번째, 두 번째 및 세 번째 여과지의 표면 및 단면 모두에서 Au가 검출되었다. 고체-잔류물이 포함된 여과지 3장을 모두 납-시금법에 사용한 결과 질산농도 모두에서 금 입자들이 회수되었다. 최대 금 입자(452.50g/t)가 얻어진 용출조건은 질산농도 6M에서 그리고 마이크로웨이브 조사시간 12분에서였다.