Browse > Article
http://dx.doi.org/10.14347/kadt.2012.34.2.145

Effect of polishing solution temperature and times by electro-polishing in dental casting Co-Cr-Mo alloy  

Jang, Jae-Young (Department of Dental Technology, Gimcheon University)
Song, Jae-Sang (Department of Dental Technology, Gimcheon University)
Nah, Jung-Sook (Department of Dental Technology, Jinju Health College)
Publication Information
Journal of Technologic Dentistry / v.34, no.2, 2012 , pp. 145-153 More about this Journal
Abstract
Purpose: The purpose of this study was to investigate to effect of the electro-polishing condition according to electrolyte temperature and current and polishing time on surface morphology and composition by scanning electron microscopy(SEM) and energy dispersive X-ray spectrometer(EDS) in dental casting Co-Cr-Mo alloys. Methods: 16 specimens were divided into 4 groups which have each 4 specimens. The size of specimens were 10mm wide and 5mm height. the electro-polishing of specimens are by polishing solution temperature and times in Co-Cr-Mo alloy by SEM and EDS analysis. Results: The results shows that most smooth surface is obtained when electro-polishing is performed at $49^{\circ}C$ for 30-40sec with electro gap of 10mm and 8 voltage. Conclusion: The morphologies of specimens after electro-polishing were scratch absent and significant between at $40^{\circ}C$ for 45sec and at $49^{\circ}C$ for 45sec.
Keywords
electro-polishing solution; temperature; electron polishing time; surface morphology;
Citations & Related Records
연도 인용수 순위
  • Reference
1 김정근, 박노진, 이상복. Metellografie 노드미디, 2001.
2 박제근. Co-Cr 합금에서 부식과 피로에 미치는 전해연마의 영향. 홍익대 금속과 석사 논문집, 2010.
3 이지환, 이정중, 김병일, 배차현. 비철금속재료. 원창출판사, 1993.
4 Kapila S, Angolkar PV. Evaluation of friction between egewise stainless steel bracket and orthodontic wires of four alloys. J Orthod, 98, 117-126, 1990.   DOI   ScienceOn
5 Poncin P, Millet C, Chevy J. Materials and Technical Devices. 27, 24-29, 2004.
6 Vander Voort GF. Metallography Principle, 119-164, 562-598, McGraw-Hill Book Company, 1976.
7 Walke W, Paszenda Z, Ziebowicz A. Achieves of Materials Science and Engineering. 28, 293-296, 2007.