• 한국전기전자재료학회논문지
• /
• 제24권8호
• /
• pp.647-653
• /
• 2011

In this study, a method to measure the thickness of thin film by EDS (energy dispersive spectroscopy) is suggested. We have developed a model which calculates the thickness of thin film from the characteristic x-ray intensity ratio of the elements in thin film and substrate by considering incident electron beam energy, x-ray generation curve, backscattering and absorption of x-ray, take-off angle of x-ray and tilt angle of the sample. We obtained the relation curve between the film thickness measured experimentally and the x-ray intensity ratio of elements. The film thicknesses calculated from the model agrees quite well with those measured experimentally. Therefore, the thin film thickness can be measured rapidly and accurately by using the model developed in this study and the x-ray intensity ratio obtained in EDS analysis.

• 한국시뮬레이션학회논문지
• /
• 제11권3호
• /
• pp.49-58
• /
• 2002

It takes 2 or 3 months to manufacture memory device. Defect has to exist owing to hundreds of processes. If there are too many defects, the memory has to be rejected. But if there are a few defects, it will be more efficient and cost reducing for the company to use it by repairing. Therefore, laser-repair process is needed for such a reason and redundancy analysis is needed to establish correct target of laser-repair process. The equipment development company had provided the redundancy analysis and each development company had developed and provided separately. So, to analyze the similar type of defects, redundancy analysis time can be very different by the manufacture. The purpose of this research is to strengthen the competitive price and to apply correlation concept in business for reducing the redundancy analysis time to repair the defects

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.21-24
• /
• 2010

This paper deals with numerical analysis on a high-$T_c$ superconducting (HTS) electrodynamic suspension (EDS) simulator according to the variation of the ground conductor conditions. Because the levitation force of EDS system is formed by the magnetic reaction between moving magnets and fixed ground conductors, the distribution of the magnetic flux on a ground conductor plays an important role in the determining of the levitation force level. The possible way to analyze HTS EDS system was implemented with 3D finite element method (FEM) tool. A plate type ground conductor generated stronger levitation force than ring type ground conductor. Although the outer diameter of Ring3 (335 mm) was larger than that of Ring2 (235 mm), the levitation force by Ring2 was stronger than that by Ring3. Considering the results of this paper, it is recommended that the magnetic flux distribution according to the levitation height and magnet current should be taken into account in the design of the ground conductors.

• The Korean Journal of Legal Medicine
• /
• 제40권2호
• /
• pp.61-64
• /
• 2016

Ehlers-Danlos syndrome type IV (EDS IV) is a hereditary disorder of the connective tissue, characterized by easy bruising, thin skin with visible veins, and spontaneous rupture of the large arteries, uterus, or bowel. EDS IV is caused by mutations of the gene for type III procollagen (COL3A1), resulting in insufficient collagen production or a defect in the structure of collagen. EDS IV can have fatal complications such as the rupture of great vessels or organs, which can cause hemorrhaging and sudden unexpected death. Here, we report a case of a 43-year-old female who collapsed after a struggle with a neighbor. In this patient, the bifurcation of the bilateral common iliac artery ruptured, with no evidence of trauma, inflammation, or atherosclerosis. Genetic analysis of COL3A1 showed the presence of a c.2771G>A (p.Gly924Arg) mutation, which may be associated with EDS IV. The forensic pathologist should consider the possibility that the spontaneous visceral or arterial rupture was caused by EDS IV. Genetic analysis is not currently a routine procedure during autopsy. However, in this case, we suggest that the patient possibly had an underlying EDS IV condition, and we recommended family members of the deceased to seek genetic analysis and counseling.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.131-134
• /
• 2015

Here we show how by processing energy dispersive X-ray spectrometry (EDS) data obtained using highly sensitive, new generation EDS detectors in the AZtec LayerProbe software we can obtain data of sufficiently high quality to non-destructively measure the number of layers in two-dimensional (2D) $MoS_2$ and $MoS_2/WSe_2$ and thereby enable the characterization of working devices based on 2D materials. We compare the thickness measurements with EDS to results from atomic force microscopy measurements. We also show how we can use electron backscatter diffraction (EBSD) to address fabrication challenges of 2D materials. Results from EBSD analysis of individual flakes of exfoliated $MoS_2$ obtained using the Nordlys Nano detector are shown to aid a better understanding of the exfoliation process which is still widely used to produce 2D materials for research purposes.

• 한국수소및신에너지학회논문집
• /
• 제30권5호
• /
• pp.455-464
• /
• 2019

Experiments were conducted to investigate the sensitivity of steel plate oxidation with temperature in a simulated furnace. Used steel plates were a general steel and a high tensile steel. Porous media burner (PM burner) used in model furnace was made for uniform temperature profile. The surrounding temperature was controlled by adjusting the flow rate of the mixture in the combustor. Oxide layer analysis was performed using SEM image analysis and EDS line scanning. Both steel sheets showed a tendency to increase the thickness of the steel sheet surface oxide layer as the temperature increases, and it was confirmed that the flaking phenomenon in surface oxidation layer appeared when the temperature was above a certain temperature.

• 여성건강간호학회지
• /
• 제16권1호
• /
• pp.78-86
• /
• 2010

Purpose: This study was to examine the fitness of a path model based on the objectification theory and to expand it by including the new variables to explain eating disorder symptomatology (EDS). Methods: The subjects consisted of 444 college women. Data was collected through self-report questionnaires that measured self-objectification (SO), social physique anxiety (SPA) and EDS as the original variables in the objectification theory, and influence of mass media (IMM) and sex-role attitude (SRA) as the new variables. Data was analyzed by SPSS/WIN 12.0 and Amos 5.0 programs. Results: IMM and SRA showed direct effect on SO. IMM had direct and indirect effect on SPA and EDS. SRA had direct and indirect effect on EDS, but only indirect effect on SPA. SO and SPA influenced EDS directly, and SO influenced indirectly EDS. Conclusion: Path analyses indicated support for the original theory and the expanded theory. It is necessary for repeated studies including various age groups of women to clarify the applicability of the objectification theory to Korean women's eating disorders. And it were recommended that we should promote womens' criticism of the image and message about the perfect female body presented in the mass media, and to highlight the relationship of gender equality to women's eating disorders in health education.

• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.79-84
• /
• 2007

Mineral Trioxide Aggregate(MTA) has been used in Endodontic treatment successfully for more than 10 years. But the high cost of MTA limits its use in endodontics in Korea. Recently many studies have been done to compare MTA and Portland cements. To investigate the chemical constitutions of MTA (Proroot MTA, Tulsa Dental), Gray Portland cement (Lafarge Halla cement), White Portland cement(Union corp), and fast setting cement (SSangyong cement), we performed SEM(scanning electron microscope)(S4700, Hitachi) examination and EDS(Energy dispersive spectrometry)(emax, Horiba) analysis. SEM examination and EDS analysis were committed to and performed in SNU DRI (Seoul National University Dental Research Institute). We found that particles of MTA were relatively round, uniform in size, and compactly packed compared to Portland cements. Chemical constitutions of MTA, GPC, WPC and FSC were similar. It was shown that MTA contains much BiO2 . MTA and WPC showed less heavy metals such as Fe and Mg compared to GPC and FSC. FSC showed remarkably high aluminum content.

• 한국조경학회:학술대회논문집
• /
• 한국조경학회 2020년도 추계학술대회 논문집
• /
• pp.56-56
• /
• 2020

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.128-130
• /
• 2007

GIS를 포함한 전력기기의 신뢰도를 높이기 위해서는 절연체 내부에서 부분방전이 발생하는 것을 최소한으로 억제할 필요가 있다. GIS 내부에서 발생하는 부분방전은 사전에 진단하여 예방을 하는 것이 중요하며 이를 방치할 경우 대형사고로 이어질 확률이 매우 크다. 현재까지는 대부분의 GIS 진단장비가 외국제품이라 국내실정에 맞지 않고 가격이 비싸며 고장 시 유지보수가 힘들다는 단점을 가지고 있다. 이러한 단점을 극복하기 위해서 본 연구내용에서는 손쉽게 부분방전을 판단할 수 있도록 저가형, 휴대형으로 개발한 GIS 진단장비에 대해 설명하고 GIS 현장에 실제 적용하여 실측한 부분방전에 대한 자료와 변전소의 부분방전 발생형태를 조사하는데 역점을 두었다.