• 센서학회지
• /
• 제25권4호
• /
• pp.235-242
• /
• 2016

A system for measuring the electrodermal activity (EDA) signal occurring at the sweat glands in the left palm and left finger of the human body was implemented in this study. The EDA measurement system (EDAMS) consisted of an algometer, a biopotential measurement system (BPMS), and a PC. Two experiments were performed to evaluate the function and clinical applicability of EDAMS. First, an experiment was carried out on the linearity of the voltage and the pressure that comprised the output signals of the algometer used for applying a pressure stimulus. Second, the amplitude of the EDA signal acquired from the electrode attached to the left palm or finger was measured while increasing the pressure stimulus of the algometer. When the pressure stimulus of the algometer applied to the left scapula was increased, the amplitude of the EDA signal increased. The amplitude of the EDA signal at the left palm was observed to be greater than that at the left finger. The amplitude of the EDA signal was observed to increase in a relatively linear relation with the intensity of the pressure stimuli. In addition, the latency of the EDA signal acquired from the electrode attached to the left palm or finger was measured while increasing the pressure stimulus of the algometer. When the pressure stimulus of the algometer applied to the left scapula was increased, the latency of the EDA signal decreased. The latency of the EDA signal at the palm was observed to be less than that at the finger. The latency of the EDA signal was observed to decrease nonlinearly with the pressure stimuli.

• 한국멀티미디어학회논문지
• /
• 제19권7호
• /
• pp.1137-1145
• /
• 2016

The system for measuring the electrodermal activity (EDA) signal occurring at the sweet glands in the human body was implemented in this study. The EDA measurement system (EDAMS) consisted of an algometer and the bio-potential measurement system (BPMS). Three experiments were performed using EDAMS. First, the linearity of the output voltage corresponding to the pressure being applied to an algometer was evaluated. The linearity of output voltage according to the pressure was 0.956. Second, the amplitude and the latency of the EDA signal at the left palm was obtained while applying the pressure stimuli to the left and right scapula. The latency of EDA signal was shorter whereas the amplitude of EDA signal was higher when the pressure applied was applied to the left scapula. Third, the amplitude and latency of the EDA was measured at left and right palm while increasing the pressure stimuli to the left scapula. The latency of EDA signal at left and right palm was decreased according to the intensity of pressure stimulus applied to the left scapula. However, the latency of the EDA signals did not show the linearity with respect to the pressure stimuli.

• 대한의용생체공학회:의공학회지
• /
• 제30권5호
• /
• pp.412-417
• /
• 2009

The purpose of this study was to assess the ability of this device during clinically important episodes of extravasation. The extravasation detection accessory (EDA) system was based of infrared ray with detection sensor, an amplifier, alarm device, receiver, cable and a computer based system. This study was a prospective, observational study in which the EDA system was used to monitor the automated mechanical injection of contrast media. Three hundred patients referred for contrast media enhanced body computed tomography studied in a prospective, observation study in which the EDA system was used to identify and interrupt any injection associated with clinically important extravasation. There were 8 true-positive cases, 276 true-negative cases, 15 false-positive cases and 1 false-negative cases. The EDA system had a sensitivity of 88.8% and a specificity of 94.8% for the detection of clinically important extravasation. The EDA system had good sensitivity for the detection of clinically important extravasation and the EDA system has the clinical potential for the early detection of extravasation of the contrast medium that is administered with power injectors.

• 한국의학물리학회지:의학물리
• /
• 제17권1호
• /
• pp.32-39
• /
• 2006

CT 검사에서 조영제의 혈관외유출을 예방하기 위해 EDA시스템을 증폭기, ADC, 스트레인 게이지로 구성하여 개발하였고, 스트레인 게이지의 신호의 수치를 나타내도록 프로그램을 설계하였다. 신호비율은 500/1000 sec, 분해능 값은 0에서 4,096범위로 표시하고, 입력범위 $0{\sim}5$ V이다. 혈관외유출 검출 문턱 값은 50으로 하였고, 10 간격으로 조정하도록 하였다. 개발된 EDA 시스템을 성인 50명을 대상으로 적용하였다. 2명의 환자에서 혈관외유출이 검출되었고, 조영제 주입속도는 2.0 mL/sec, 2.5 mL/sec, 압력은 137 psi, 158 psi, 혈관외유출된 조영제 용량은 22 mL, 25 mL였다. 설정된 주입 조영제에 비해 20% 정도의 적은 용량이 혈관외유출되었다. 개발된 EDA 시스템은 소량의 조영제를 검출하여 혈관외유출을 예방하는 효과가 있다.

• Composites Research
• /
• 제17권6호
• /
• pp.37-43
• /
• 2004

경화제의 사슬길이와 화학구조 차이가 반응특성, 열적, 기계적특성에 미치는 영향을 조사하기 위하여 선형구조를 가지고 양쪽 막단기에 에폭시기를 갖는 범용 에폭시수지인 DCEBF를 양쪽 관능기가 동일하고 주쇄의 사슬길이가 서로 다른 선형아민 경화제인 EDA와 HMDA로 각자 1:1 당량비로 혼합하여 예비 및 후 경화조건으로 경화하였다. 그 결과, 수지 경화물의 특성은 경화제 주쇄의 탄소원자수에 따라 큰 영향을 받는 것으로 밝혀졌다. 즉, 주쇄의 길이가 짧은 EDA 경화계는 길이가 긴 HMDA 경화계보다 열안정성, 밀도, 부피수축(%), 유리전이온도, 인장탄성률 및 인장강도, 굴곡탄성률 및 굴곡강도의 값이 높게 나타났고, 반면에 최대발열온도, 에폭시기의 전환률, 선팽창계수의 값은 낮게 나타났다. 이는 주쇄의 탄소원자수 2개를 가지는 EDA가 3차원 망목상 공간구조 형성과정에서 packing capability가 우수하여 rigid한 특성을 가지기 때문이다. 굴곡 파단 특성은 굴곡탄성률과 굴곡강도와 밀접한 관계를 나타내었다.

• 한국의학물리학회지:의학물리
• /
• 제17권4호
• /
• pp.238-245
• /
• 2006

CT 검사에서 조영제 혈관외유출을 예방하기 위해 EDA 시스템을 개발하여 가토를 대상으로 실험적으로 혈관외유출의 검출 효율을 평가하였다. 7마리의 가토 IV 정맥 부위에 EDA 시스템의 스트레인게이지를 부착하여 조영제를 주입하면서 혈관외유출 검출 효율을 평가하였다. 조영제의 혈관외유출은 7건으로 혈관외유출 용량 $14{\sim}23ml$ (평균 18.86 ml), 혈관외유출 발생시간 평균 11.29초, 평균압력 109.71 psi, EDA 시스템에서 스트레인게이지의 분해능 평균 512.18, 진양성 7건, 진음성 19건, 위양성 2건이었고, 민감도 100%, 특이도 90%로 나타났다. 개발된 EDA 시스템을 가토에 실험적으로 적용하여 소량의 혈관외유출 조영제를 검출하는 효율이 있어 혈관외유출을 예방하는 효과가 있다.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.280-286
• /
• 2007

The wearable sensor glove was developed using EDA sensors and conducting fabric. EDA(Electro-dermal Activity) signal is an electric response of human skin. There are SIL(Skin Impedance Level) and SIR(Skin Impedance Response) in EDA. SIL consists mostly of a DC component while SIR consists of an AC component. The relationship between drowsiness and the EDA signal is utilized. EDA sensors were made using a conducting fabric instead of AgCl electrodes, for a more suitable, more wearable device. The EDA signal acquisition module was made by connecting the EDA sensor gloves through conductive fabric lines. Also, the EDA signal acquisition module can be connected to a PC that shows the results of the EDA signal processing analysis and gives proper feedback to the user. This system can be used in various applications to detect drowsiness and prevent accidents from drowsiness for automobile drivers.

• 대한의용생체공학회:의공학회지
• /
• 제29권1호
• /
• pp.66-72
• /
• 2008

The major risk associated with the use of automated power injectors is the well known complication of contrast material extravasation at the injection site. Automated injection of computed tomography (CT) contrast media can produce the compartment syndrome. The purpose of this study was to assess the ability of this device during clinically important episodes of extravasation. The extravasation detection accessory (EDA) system was composed of a strain gage, an amplifier and a computer based system. A strain gage pliable adhesive patch was applied to the skin aver the intravenous catheter and the catheter was connected to the power injector with a cable to monitor the resolution data. If the programmed monitoring, which was developed with MS Visual C++, at the extravasation occurred, then the injection was interrupted the auto injector. CT was used to demonstrate the clinically important extravasation. This study was a prospective, observational study in which the EDA system was used to monitor the automated mechanical injection of contrast material in 7 dogs. There were two true-positive cases (range of extravasation volumes: $18{\sim}22ml$), twenty three true-negative cases, three false-positive cases and no false-negative cases. The EDA system had a sensitivity of 100% and a specificity of 88% for the detection of clinically important extravasation. The EDA system had good sensitivity for the detection of clinically important extravasation and the EDA system has the clinical potential for the early detection of extravasation of the contrast medium that is administered with power injectors. The EDA system is easy to use safe and accurate for the monitoring extravasation of the intravenous injections, and this system may prove especially useful in CT applications.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.873-879
• /
• 2011

Adsorption experiment of carbon dioxide was performed on MCM41 silica impregnated with two kinds of EDA(ethylenediamine) and MEA(monoethanolamine). The prepared adsorbents were characterized by BET surface area, X-ray diffraction and FT-IR. The $CO_2$ capture study was investigated in a U type packed column with GC/TCD. The results of XRD for MCM-41 and amine-impregnated MCM41 showed typical the hexagonal pore system. BET results showed the MCM 41 impregnated amine to have a surface area of 141 $m^2/g$ to 595 $m^2/g$ and FT-IR revealed a N-H functional group at about 1400$cm^{-1}$ to 1600$cm^{-1}$. The $CO_2$ adsorption capacity on EDA and MEA was as follow: MCM41-EDA30 > MCM41 -EDA40 >MCM41-EDA20 >MCM-EDA10 and MCM41-MEA40 >MCM41-MEA30 > MCM41-MEA20> MCM41-MEA10. The MCM41-EDA30 showed the highest adsorption capacity due to physical adsorption and chemical adsorption by amino-group content. The results suggest that mesoporous media with EDA is effective adsorbent for $CO_2$ capture from flue gases.

• 한국항행학회논문지
• /
• 제12권3호
• /
• pp.255-262
• /
• 2008

본 논문은 JSP (Java Server Page) 웹 서버 기반 인터넷 웹 브라우저 용 회로부품정보 관리 시스템을 구축하였다. 설계자가 부품정보의 검색 및 신규 등록을 수행할 수 있도록 하였으며, 이를 EDA (Electronic Design Automation) 시스템과 직접 연동하여 회로 및 부품의 설계를 실 시간적으로 적용하도록 하는 웹 연동 회로부품 관리 시스템을 구현하였다. 그리하여 개별 설계자들이 작성 관리하던 EDA 시스템 부품 라이브러리를 웹 기반으로 관리 사용할 수 있도록 하여 회로설계 및 부품 개발에 효율성을 이루었다.