• Membrane Journal
• /
• v.32 no.6
• /
• pp.401-410
• /
• 2022

Demand for lithium hydroxide (LiOH) is annually increasing due to its efficiency and safety for the environment in comparison to its current alternatives. Lithium can be found in different salty and brine lakes which later synthesized to produce LiOH for various applications. Different methods are used to separate and recover lithium ions, the most common of which is electrodialysis (ED). ED is a membrane-based separation technique which works on potential difference of its layers as a driving force to push ions from one side to another. The ion exchange membrane (IEM) in ED makes the process efficient because of the perm selectivity of different ions vary depending on their hydrodynamic volume. In this review, the different alteration strategies of both ED and IEM, to enhance the recovery of lithium ions are discussed.

• Membrane Journal
• /
• v.32 no.2
• /
• pp.91-99
• /
• 2022

It is a global challenge to fulfill the demand for clean water at an affordable cost to all the strata of the population. Desalination of seawater as well as brackish water by the membrane separation process is a well-established and cost-efficient method. However, there is still inherent problem of membrane fouling, disposal of the reject as well as a capital-intensive process. While electrodialysis (ED) is a membrane-based separation process in which a driving force is the potential difference. The advantages of ED process are excellent efficiency and low operation cost. Ion exchange membrane (IEM) used in the ED process needs to have higher chemical and thermal stability along with excellent mechanical strength for long-term use without losing its efficiency. The ion exchange capacity of the ED membrane is largely dependent on the conductivity of IEMs. In this review, the modification strategy of the pristine membrane to enhance the stability and ion conductivity of cation exchange membrane (CEM) and anion exchange membrane (AEM) is discussed.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.3-19
• /
• 2022

Electro-membrane technology is a process for separating and purifying substances in aqueous solution by electric energy using an ion exchange membrane with selective permeability, such as electrodialysis (ED) and bipolar electrodialysis (BMED). Electro-membrane technology is attracting attention as an environmental friendly technology because it does not generate by-products during the process and the recovered base or acid can be reused during the process. In this paper, we investigate the principles of ED and BMED technologies and various characteristics and problems according to the cell configuration. In particular, by investigating and analyzing research cases related to the treatment of waste sodium sulfate (Na₂SO₄), which is generated in large amounts during the metal recovery process.

• YAKHAK HOEJI
• /
• v.48 no.2
• /
• pp.117-121
• /
• 2004

Ranunculin, a potent cytotoxic component of P. koreana, was synthesized by reacting (s)-(-)-5-(hydroxymethyl)-2(5H)-furanone with 2,3,4,6-tetra-O-acetyl-$\alpha$-D-glucopyranosyl bromide and successive removal of the acetyl protecting group by 0.5 M HCl/MeOH. A new deacetylation process of the intermediate tetraacetylranunculin was deviced giving a yield of 83% of ranunculin. Protoanemonin, the cytotoxic structural moiety of ranunculin, was synthesized by dehydration of (s)-(-)-5-hydroxymethyl-2(5H)-furanone. Ranunculin showed a moderate cytototoxic activity against A-549 (ED$_{50}$=7.53 $\mu\textrm{g}$/$m\ell$), NIH3T (ED$_{50}$=13.6$\mu\textrm{g}$/$m\ell$), and SK-OV-3 (ED$_{50}$=17.5 $\mu\textrm{g}$/$m\ell$). Meanwhile, protoanemonin also exhibited moderate cytotoxicity against A-549 (ED$_{50}$=9.38 $\mu\textrm{g}$/$m\ell$), NIH3T (ED$_{50}$=13.8 $\mu\textrm{g}$/$m\ell$), and SK-OV-3 (ED$_{50}$=15.1 $\mu\textrm{g}$/$m\ell$). It was found that both of the synthetic products showed a potenter cytotoxicity against A-549.ainst A-549.

• Journal of Korean Critical Care Nursing
• /
• v.9 no.1
• /
• pp.15-26
• /
• 2016

Purpose: The aim of this study was to identify thinking strategies in the complicated decision-making process based on real patient-based data of triage nurses in the emergency department (ED). Methods: This study used the 'think aloud' method to collect data from 8 triage nurses from one general hospital ED in South Korea. The data were analyzed with protocol analysis using thinking strategies. Results: The triage process was divided into three stages. The first stage consisted of 8 thinking strategies, including searching for information. They used intuition based on directly observed concepts for identifying a crisis. The second stage consisted of 17 thinking strategies related to the decision-making process. They assessed patients and generated a hypothesis to try to understand their health problems through analytic thinking. The third stage consisted of 10 thinking strategies, including qualifying. They considered the situation of the ED and properly triaged the patients. During the triage process, they frequently used judging the value and searching for information on 17 thinking strategies. Conclusions: Triage nurses demonstrated various connected thinking strategies for each stage. Based on our results, further studies should be done to develop a triage education program.

• Membrane Journal
• /
• v.1 no.1
• /
• pp.5-12
• /
• 1991

Since the discovery of the Loeb-Sourirajan reverse osmosis membrane, thirty years have passed and many membrane technologies and new membranes for applications have been developed in the world. In the early stage of these developments Japan has not contributed much, but from the middle of 70ties Japan has started its own R&D projects starting from the desalination technology, and now various private industries and government ministries are actively engaging in R & D of membrane technologies in Japan. In Table 1 the chronological developments of important events of developments and projects relating membrane technologies inside and outside of Japan are introduced and their details will be explained. The first membrane technology applied in the Japanese industry was a electrodialysis(ED) process using ion-exchange membranes. These membranes were first developed in early 50ties and the Japanese government decided to use this method for concentration of sea-water to produce salt, which was then produced by solar evaporation. This development program started from 1960 by the Japan Monopoly Corp.(at that time). To apply ED process for sea-water concentration it was necessary to develop ion-exchange membranes having very low electric resistance to avoid energy loss due to Joule heat, and those having selectivity to permeate single valent ions only to avoid scale formation in the ED stacks. Three Japanese companies, Asahi Glass, Asahi Chemical and Tokuyama Soda, have succeeded to develop such membranes, and until 1971 all of the seven salt manufacturing companies had adopted ED for production of food salt.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.303-314
• /
• 2006

The exchange of CAD (Computer Aided Design) models between different CAD systems and to downstream applications such as manufacturing has become very important to modem industry. One serious current issue is that the process cannot automatically import existing 3-D solid models in a variety of commercial CAD formats into the process without manually re-mastering the model in current standard including "SIEP AP(Application Protocol) 203 Edition 1" To fully integrate technical data from the design agency to the shop floor, design intent and validated 3D geometry of feature based parametric CAD model should be brought into the standardized processes. To overcome this limitation, AP203 Edition 2 (Ed.2) and its related STEP parts such as Part55, Part108, Part109, Part111 and Part112 are starting to be available to handle this problem. The features in Part111 are harmonized with the machining features available in AP224. This paper is focused on two mapping technologies: CAD to Part111 mapping and Pat111 to AP224 mapping including case studios and it will provide the guideline about what should be done next in the AP203 Ed.2 to AP224 mapping. The final goal of this project is to integrate technical data from CAD to AP224 based manufacturing information through AP203 Ed.2.

• The Mathematical Education
• /
• v.62 no.2
• /
• pp.211-236
• /
• 2023

The purpose of this study is to derive implications of preservice mathematics teacher education in Korea by analyzing the case of edTPA used in the preservice teacher training process in the United States. Recently, there has been a growing interest in promoting professional competencies considering not only the cognitive dimension related to knowledge development of preservice mathematics teachers but also the situational dimension considering reality in the classroom. The edTPA in the United States is a performance-based assessment based on lessons conducted by preservice teachers at school. This study analyzes the professional competencies required of preservice mathematics teachers by analyzing handbooks that described the case of edTPA in which preservice mathematics teachers in the United States participate. The edTPA includes planning, instruction, and assessment tasks, and continuous tasks are performed in connection with classes. Thus, the analysis is conducted on the points of linkage between the description of evaluation items and criteria in the planning, instruction, and assessment tasks, as well as the professional competencies required from that linkage. As a result of analyzing the edTPA handbooks, the professional competencies required of preservice mathematics teachers in the edTPA assessment were the competency to focus on and implement specific mathematics lessons, the competency to reflectively understand the implementation and assessment of specific mathematics lessons, and the competency to make a progressive determination of students' achievement related to their learning and their uses of language and representations. The results of this analysis can be used as constructs for competencies that can be assessed in the preservice in the organization of the preservice mathematics teacher curriculum and practice training semester system in Korea.

• Macromolecular Research
• /
• v.8 no.4
• /
• pp.153-164
• /
• 2000

By electrodeposition (ED) using a monomeric- and two polymeric coupling agents, the interfacial shear strength (IFSS) of carbon fiber/epoxy composites was investigated by fragmentation test. ED results were compared with the dipping and the untreated cases under dry and wet conditions. Multi-fiber composites (MFC) were used for the direct comparison for the untreated and the treated cases. Various treating conditions including time, concentration and temperature were evaluated, respectively. Under dry and wet conditions ED treatment exhibited much higher IFSS improvement compared to the dipping and the untreated cases. Monomeric- and polymeric coupling agents exhibited the comparative IFSS improvement. Adsorption mechanism between coupling agents and carbon fiber was analyzed in terms of the electrolyte molecular interactions during ED process based on to the chain mobility. The microfailure modes occurring from the fiber break, matrix and interlayer cracks were correlated to IFSS.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.272-278
• /
• 2023

In this study, we analyzed the effects of current density and electroosmotic phenomena on the desalination performance of electrodialysis (ED). We conducted ED experiments under constant voltage conditions, changing the concentration of the concentrate solution from 10 to 200 g/L. During the ED operation, we measured the current density and charge supplied to the stack, the concentration of the diluted and concentrated solutions, and the amount of water transported by electroosmosis to analyze desalination performance. As the concentration of the concentrated solution increased, the selectivity of the ion exchange membrane decreased, resulting in a decrease in current efficiency. Moreover, the current efficiency was found to be influenced by the current density supplied. When the current density exceeded 15 mA/cm², back diffusion of ions was suppressed, leading to an increase in current efficiency. We also investigated the specific water transport by electroosmosis during the ED operation. We found that the amount of water transported increased proportionally to the concentration ratio of the concentrated and diluted solutions. When the concentration ratio exceeded 100, the specific water transport rapidly increased due to osmotic pressure, making it challenging to obtain a concentrated solution greater than 200 g/L.