• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.691-700
• /
• 2015

Here, we present a new framework for histogram equalization in which both local and global contrasts are enhanced using neighborhood metrics. When checking neighborhood information, filters can simultaneously improve image quality. Filters are chosen depending on image properties, such as noise removal and smoothing. Our experimental results confirmed that this does not increase the computational cost because the filtering process is done by our proposed arrangement of making the histogram while checking neighborhood metrics simultaneously. If the two methods, i.e., histogram equalization and filtering, are performed sequentially, the first method uses the original image data and next method uses the data altered by the first. With combined histogram equalization and filtering, the original data can be used for both methods. The proposed method is fully automated and any spatial neighborhood filter type and size can be used. Our experiments confirmed that the proposed method is more effective than other similar techniques reported previously.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1611-1614
• /
• 2007

This paper is concerned on design of organic flow deposition system and development of the deposition process for pentacene thin film by OFD and on electrical characteristics of pentacene films deposited by it. OFD will overcome vacuum thermal evaporator's limits and it will provide a large-scale mass, uniform and good electrical performance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.60-65
• /
• 1985

A method of weighting of a staggered pulse train is presented and an improvement per-formance of the signal-to-noise ratio for each case is compared. As the result of a computer simulation, the signal-to-noise ratio for weighting of a stagger-ed pulse train is a great improvement on the case of an uniform pulse train. The signal-to-noise ratio of optimum weighting is more improved than that of binomial weighting, it is known that the signal-to-noise ratio is improved as the increasing of the number of delay line cancellers, and it is shown that the signal-to-noise ratio is improved by weighting of the MTI output pulses before the integration process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.78-87
• /
• 2001

This paper deals with the study on the cutting characteristics in ball-end milling process. First of all, the effects of the geometric cutting conditions such as the cutting speed, feedrates and the path interval on the surface integrity were evaluat-ed by the analytical and the experimental approaches. Secondly, the cutting mechanism model was developed to predict the cutting force accurately. It is possible for the proposed model to predict the shape error, estimate system stability and build the reliable adaptive control system. A large amount of experimental set are performed to show the validities of the proposed theories and to investigate the effect of cutting geometry such as rubbing effects, burr effects and etc.

• Journal of the Korean institute of surface engineering
• /
• v.27 no.3
• /
• pp.134-142
• /
• 1994

$Al_2O_3$coatings on mild steel substrate by plasma spray process were produced to evaluate microstructural characterization and mechanical properties. As-coated $Al_2O_3$coating samplessd were subjected to two heat treat-ment conditions : ⅰ) annealing under vacuum circumstance, ⅱ) hot press treated condition. The two heat treat-ed coatings were investigated in terms of microhardness, adhesion strength, wear resistance, porosity forma-tion, and microstructures. In the case of the coatings which were subject to preparation step ⅰ, the porosity in the coating was decreased with the increase of temperature ($700^{\circ}C$-$1100^{\circ}C$), and the wear resistance, microhardnesss and adhesion strength were increased with the increase of temperature. On the other hand, in the case of the coatings which were subject to preparation step ⅱ, wear resistance and adhesion strength were improved with the increase of temperature and pressure. Experimental measurements of coatings which were produced by both preparation conditions were enhanced compare to those of as-coated coatings.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.298-305
• /
• 2001

Emulsified transesterification of soybean oil into biodiesel was investigated using potassium hydroxide and sodium methoxide catalysts with methyl glucoside oleic polyester as a methanol-in-oil emulsifier. The transesterification reaction conditions were optimized to obtain high yields of fatty acid methyl esters of the quality defined by biodiesel standards. The developed process resulted in $95{\sim}96%$ of overall yield from soybean oil by alkali-catalyzed methanolysis at $45^{\circ}C$ of reaction temperature with 6:1 of methanol-to-oil molar ratio and 1(v/v)% methyl glucoside oleic polyester in the presense of 0.8wt% KOH and 1.2wt% $NaOCH_{3}$.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.346-348
• /
• 1998

The stability of Power system installed Hi-Tc Superconducting Fault Current Limiter(SFCL) is analyzed as a process of developing SFCL. In interpretation, simple mimic system(only one motor) is assumed and then the circuit with SFCL in system is solved. In case the SFCL is installed in Power system, it protected synchronization more effectively both in symmetrical 3-phase fault and single phase line to ground fault.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.191-191
• /
• 2015

해수에 침지되어 있는 금속에 음극방식법을 실시하게 되면 $OH^-$이온이 증가하게 된다. 이때 금속기판과 용액의 계면에서 pH는 상승하고, 석출하는 피막에 영향을 준다. 표면에 형성되는 피막은 주로 부르사이트(Brucite)이고, 이는 전기화학방식의 전형적인 석회질 피막(Calcareous Deposits Film)형성 메커니즘을 따른다. 본 연구에서는 음극에 흘려주는 전류밀도 및 양극의 영향을 분석하였으며 SEM, XRD, EDS를 이용하여 피막의 조성성분과 결정구조를 확인했다. 전착피막의 내식성은 AZ31-Mg 양극 사용 시 가장 우수하였고, 전류밀도는 $1{\sim}10A/m^2$중 $5A/m^2$에서 가장 우수한 밀착력을 보였다. 따라서 위와 같은 코팅 제작 프로세스에 대한 기초적인 설계 지침을 제시함으로서 천연코팅막의 한계를 보완 할 수 있을 것이라 사료된다.

• Journal of Korean Society of Rural Planning
• /
• v.2 no.2
• /
• pp.45-56
• /
• 1996

Land suitability classification(LSC) is an appraisal and grouping(or the process of appraisal anti grouping) of specific tracts(of land) in terms of their relative land suitability for a definEd use, and is one of the land use planning techniques. This paper reviews the selected studies on LSC whose purposes are to especially contribute land use planning in case of Japan, So, this study examines the LSC's application to Korea based on Japanes LSC studies with a view to development of the methods on LSC for rational land use planning in our rural area. The result resolves itself into Table 2. However, it is undesirable to borrow from Japanes LSC studies like that, because of the difference of administrative,geographical,traditional,social and economical conditions. Therefore, it is necessary that the many case studies and examinations should be carried out in order to develop the methods on LSC suitable to Korean actual circumstances.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.388-395
• /
• 1999

There occurred a moderate size earthquake of M=5 at Whagae-Myun Hadong-Gun Kyongsangnam-Do of Korea, It caused severe damage to the buildings and other structures is Sang-Gye-Sa a famous and beautiful Buddhist Temple, The 5-story stone pagoda was standing in front of Keumdang. The top component tipped over and fell to the ground during the earthquake. In order to have accurate and quantitative estimate of the intensity of earthquake a full-scale replica is made through rigorous verification process, The completed model was mounted on the shaking table and subjected to th seismic tests. It was observed that the top component overturned at 0.16 G of EPGA when the NS component of the 1940 el Centro earthquake records was used as the input motion. A brief history of this project is presented and important test results are report6ed and their implication is discussed.