References
- Int. J. Mach. Tool Des. Res. v.22 no.1 The prediction of cutting forces in end milling with application to comering cuts W.A. Kline;R.E.DeVor
- Int. J. Mach. Tool Design Research. v.23 Cutting forces in down milling A. Sabberwal
- Annals of CIRP v.37 no.1 A Method for Cutting Force Evaluation of End Mills A. Ber
- Trans. ASME v.63 An analysis of the milling process M.E. Martellotti
- J. of Eng. for Industry v.106 A mechanistic model for the prediction of the force system in face milling operation H.J. Fu;R.E. DeVor;S.G.Kapoor
- J. of Eng. for Industry v.104 The Prediction of Surface Accuracy in End Milling W.A. Kline;R.E. DeVor;I.A. Shareef
- JSPE v.48 no.5 Relation between Cutting Force Curve and Working Accuracy with Ball-Nose End Mills Y. Fujii;H. Iwabe
- Int. J of Mach. Tools Manufact. v.31 The Prediction of Cutting Forces in Ball-end Milling M. Yang;H.Park
- J. of Eng. For Industry v.108 Dynamics of High-speed Milling J. Tlusty
- J. of Eng. For Industry v.112 Update on High-speed Milling Dynamics S. Smith;J. Tlusty
- J of JSPE v.46 A Theoretical Analysis of Cutting Speed Components on the Rake Face of Circular Cutting Edge Ball End Mill T. Kishinami(et al)
- 대한기계학회논문집 v.9 no.4 원추팁 볼 엔드밀의 3차원곡면 절삭력계에 관한 연구 박천경;맹희영
- Int. J. Mach. Tools Manufact v.34 no.5 The prediction of cutting forces in the ball-end milling process-I. Model formulation and model building procedure H.Y. Feng;C.H. Menq
- Int. J. Mach. Tools Manufact. v.35 no.8 The prediction of dimensional error for sculptured surface productions using the ball-end milling process-I. Chip geometry and cutting force prediction E.M. Lim;H.Y. Feng;C.H. Meng;Z.H. Lin
- Int. J. Mach. Tools Manufact. v.35 no.8 The prediction of dimensional error for sculptured surface productions using the ball-end milling process-II. Surface generation model and experimental verification E.M. Lim;H.Y.Feng;C.H. Meng;Z.H. Lin
- 한국정밀공학회논문집 v.14 no.3 Zmap을 이용한 임의의 절삭영역에서 볼 엔드밀의 절삭력 예측 김규만;조필주;김병희;주종남
- 한국정밀공학회논문집 v.12 no.3 3축머시닝센터와 치구를 이용한 금형의 정밀가공시의 특성해석 김병희;주종남