• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.465-466
• /
• 2008

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.128-136
• /
• 2013

This study presents the development of Gateway Control Module using SAE J1939 protocol for the commercial vehicles. Presently, the load rate of CAN bus is increased by the single network composition and addition of new ECUs for development of intelligent vehicles. Because the embedded system of the integrated network control function has the errors of the CAN bus caused by the increase of ECU, it is needed for development of commercial vehicles. Also, this study presents the development of smart functions that can diagnosis CAN bus errors, fault diagnosis of ECU and basic function that arbitrates CAN bus between ECUs of commercial vehicle. GCM was designed for 4channel separation about Gateway function as solution of load rate decrease and smart functions. HILS(Hardware in the loop simulation)system that can achieve simulation about CAN Messages of all systems on vehicle was applied to evaluate performance and verification of all functions and performance. The load rate on CAN bus was decreased at using functions what was delivery, block and process of GCM. Through this, it was enabled to organize systematic architecture for gateway.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1436-1445
• /
• 2008

Currently, mobile handset embeds many communication modules including CDMA and Bluetooth, and many applications are developed based on these modules. In this paper, we study about wireless vehicle diagnosis software and user interface based on bluetooth system on mobile handset. We developed Bluetooth communication system on protocol converter between OBD(On Board Diagnostics)-II system. Based on this system, we can communicate ECU(Engine Control Unit) and mobile device based on windows .NET compact framework platform. Therefore we can easily diagnose vehicle state and obtain engine data. All user interface and vehicle diagnosis systems on mobile handset are developed under windows .NET compact framework platform. Using this system we achieved several improvements over existing vehicle diagnostic system; 1) the software download and upgrade can be achieve on wireless environment, 2) no additional diagnostic devices are requires, which saves additional cost and we can diagnose the vehicle easily, 3) we can easily port our system on many embedded systems including PDA and navigator, etc.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2014

In this paper, we examine Asymmetric Multi-Processing Environment to provide LDW service. Asymmetric Multi-Processing Environment consists of high-speed MCU to support rapid image processing and low-speed MCU for controlling with other ECU at the control domain. Also we designed rapid image process application and LDW application Software Component(SW-C) according to the development process rule of AUTOSAR. To communicate between two MCUs, timer based polling based IPC was designed. Also to communicate with other ECUs(Electronic Control Units), we designed CAN messages to provide alarm information and receiving CAN message to catch the Turn signal. We confirm the possibility of the various ADAS development using an Asymmetric Multi-Processing Environment and AUTOSAR platform. We also expect providing ISO 26262 functional safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.278-284
• /
• 2006

The popularity of the diesel engine revolves around its fuel efficiency, reliability, and durability compared to the gasoline engine. However, the main disadvantage of diesel engine is the emission of particulate matter (PM) which is known as carcinogenic substance. Therefore recent progress in engine management and after-treatment systems has led to great improvement to satisfy strict emission regulations. To comply with powerful environment regulations, this study is focused on the decrease of PM(soot) as to increase significantly exhaust temperature. Therefore, HC injection is used as the method to go to the PM regeneration temperature in front of filters composed of diesel oxidation catalyst(DOC) and diesel particulate filter(DPF). And especially, LPG is used because it has good chemical reactions with exhaust. In this study, we could manufacture the test bench thought LPG injection - with which soot can be decreased-, construct 3 kinds of database(DB) according to quantity of temperature to decide the LPG injection quantity and develop DPF ECU algorithm.

• Electronics and Telecommunications Trends
• /
• v.34 no.1
• /
• pp.123-131
• /
• 2019

Automotive electronics are complex and require high performance with an advanced driver assistant system (ADAS) and a functioning autonomous system. Thus, considering their complexity, the processor of the electronic control unit (ECU) requires a design that ensures high performance and reliability to ensure functional safety. This study discusses the technology used for developing a processor that can ensure functional safety of current automotive electronic systems.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.267-276
• /
• 2021

The automotive industry and academic research have been continuously conducting research on standardization such as AUTOSAR (AUTomotive Open System ARchitecture) and ISO26262 to solve problems such as safety and efficiency caused by the complexity of electric/electronic architecture of automotive. AUTOSAR is an automotive standard software platform that has a layered structure independent of MCU (Micro Controller Unit) hardware, and improves product reliability through software modularity and reusability. And, ISO26262, an international standard for automotive functional safety and suggests a method to minimize errors in automotive ECU (Electronic Control Unit)s by defining the development process and results for the entire life cycle of automotive electrical/electronic systems. These design methods are variously applied in representative automotive safety-critical systems. However, since the functional and safety requirements are different according to the characteristics of the safety-critical system, it is essential to research the AUTOSAR functional safety design method specialized for each application domain. In this paper, a software functional safety mechanism design method using AUTOSAR is proposed, and a new failure management framework is proposed to ensure the high reliability of the product. The AUTOSAR functional safety mechanism consists of memory partitioning protection, timing monitoring protection, and end-to-end protection. The fault management framework is composed of several safety SWCs to maintain the minimum function and performance even if a fault occurs during the operation of a safety-critical system. Finally, the proposed method is applied to the Shift-by-Wire system design to prove the validity of the proposed method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.152-156
• /
• 2011

AVM(Around View Monitoring) 시스템은 차량 주변에 대한 영상을 운전자에게 제공함으로써 안전 운전을 도와주는 시스템이다. 측면 거울이나 실내 거울을 통해서 볼 수 없는 사각 지대는 운전자의 안전 운행에 위협이 된다. 사각지대는 특히 후진 주행, 주차, 좁은 골목길 주행, 굽은 길 회전 등에서 차량 파손 및 인사 사고의 원인이 된다. 이러한 위험을 피하기 위해 후방의 장애물을 감지하는 후방 센서나 후방 카메라 등과 같은 운전자의 시야를 개선하는 ECU들이 개발되어 사용되고 있다. 이러한 ECU들의 도움을 받더라도 차량의 전, 후, 좌, 우 사방의 상황을 동시에 볼 수 없기 때문에 사고를 피하기 위해 운전자들은 주의를 기울여 운전해야 한다. 본 논문에서는 운전자의 안전 운행을 돕기 위해 차량 주변 영상을 실시간으로 제공하는 4SM 시스템을 설계하고 구현한다. 본 논문에서 제안하는 4SM 시스템은 차량의 전, 후, 좌, 우에 장착된 4대의 카메라로부터 입력된 영상을 통합하여 Bird's Eye View 영상을 운전자가 한 눈에 차량 주변 상황을 인식할 수 있도록 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.1-11
• /
• 2000

This study is aimed to develop a proto-type LPG engine for medium-duty commercial vehicles in order to substitute for conventional diesel engine. Recently, it is recognized that diesel engines are main cause for smoke pollution in urban site. So, it is expected to reduce this environmental emission by developing and substituting LPG engine which has the advantage of practical use in a short development period in aspects of infrastructures. For that, after analysing the specifications and performance characteristics of a base diesel engine, parts of combustion chamber, intake system, fuel supply and ignition systems suitable for LPG combustion were re-designed and manufactured. And and engine controller for fuel supply and ignition distributions was matched by feedback mapping based on the speed-load conditions. The torque and power of LPG engine were increased by 6∼12% on the overall driving conditions compared to the base diesel engine, and fuel consumption rate marked the similar level based on the fuel price. Exhaust emissions such as THC, CO, NOx recorded the same order with conventional LPG engine for passenger car.

• Review of KIISC
• /
• v.32 no.4
• /
• pp.7-17
• /
• 2022

운전자 보조 시스템을 통한 차량의 전자적인 제어를 위하여, 최근 차량에 탑재된 전자 제어 장치 (ECU; Electronic Control Unit)의 개수가 급증하고 있다. ECU는 효율적인 통신을 위해서 차량용 내부 네트워크인 CAN(Controller Area Network)을 이용한다. 하지만 CAN은 기밀성, 무결성, 접근 제어, 인증과 같은 보안 메커니즘이 고려되지 않은 상태로 설계되었기 때문에, 공격자가 네트워크에 쉽게 접근하여 메시지를 도청하거나 주입할 수 있다. 악의적인 메시지 주입은 차량 운전자 및 동승자의 안전에 심각한 피해를 안길 수 있기에, 최근에는 주입된 메시지를 식별하기 위한 침입 탐지 시스템(IDS; Intrusion Detection System)에 대한 연구가 발전해왔다. 특히 최근에는 AI(Artificial Intelligence) 기술을 이용한 IDS가 다수 제안되었다. 그러나 제안되는 기법들은 특정 공격 데이터셋에 한하여 평가되며, 각 기법에 대한 탐지 성능이 공정하게 평가되었는지를 확인하기 위한 평가 프레임워크가 부족한 상황이다. 따라서 본 논문에서는 machine learning/deep learning에 기반하여 제안된 차랑용 IDS 5가지를 선정하고, 기존에 공개된 데이터셋을 이용하여 제안된 기법들에 대한 비교 및 평가를 진행한다. 공격 데이터셋에는 CAN의 대표적인 4가지 공격 유형이 포함되어 있으며, 추가적으로 본 논문에서는 메시지 주기 유형을 활용한 공격 유형을 제안하고 해당 공격에 대한 탐지 성능을 평가한다.