• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.354-358
• /
• 2009

소형 가스터빈 엔진은 무인 항공기 및 소규모 비상 발전 시스템의 동력 기관으로서 각광받고 있으며, 중대형 가스터빈 엔진의 기초연구 및 가스터빈 교육용으로도 큰 의미를 가지고 있다. 현재 다수의 국내외 업체에서는 소형 가스터빈의 교육용 실험 장치를 제조 및 판매하고 있으나, 모두 운전 영역에서의 데이터 수집만이 가능하고 상용 ECU가 엔진을 제어하고 있기 때문에 소형 가스터빈의 열유체 역학적인 현상을 관측하는 것만이 가능하기 때문에 특정 목적에 따른 실험 변수의 제어를 통한 심화된 연구가 불가능하다. 따라서 본 연구에서는 사용자의 활용도가 높은 LabVIEW 소프트웨어 및 하드웨어의 신호 수집, 제어 및 분석 체계를 이용하여 소형 가스터빈의 실험 변수 제어 및 데이터 수집, 분석이 하나의 통합된 시스템 내에서 수행될 수 있는 Intefrated Modifiable Test Rig의 설계 및 제작이 수행되었다.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.177-186
• /
• 2017

With the latest developments in ICT(Information Communication Technology) technology, research on Intelligent Car, Connected Car that support autonomous driving or services is actively underway. It is true that the number of inputs linked to external connections is likely to be exposed to a malicious intrusion. I studied possible security issues that may occur within the Connected Car. A variety of security issues may arise in the use of CAN, the most typical internal network of vehicles. The data can be encrypted by encrypting the entire data within the CAN network system to resolve the security issues, but can be time-consuming and time-consuming, and can cause the authentication process to be carried out in the event of a certification procedure. To resolve this problem, CAN network system can be used to authenticate nodes in the network to perform a unique authentication of nodes using nodes in the network to authenticate nodes in the nodes and By encoding the ID, identifying the identity of the data, changing the identity of the ID and decryption algorithm, and identifying the cipher and certification techniques of the external invader, the encryption and authentication techniques could be detected by detecting and verifying the external intruder. Add a monitoring node to the CAN network to resolve this. Share a unique ID that can be authenticated using the server that performs the initial certification of nodes within the network and encrypt IDs to secure data. By detecting external invaders, designing encryption and authentication techniques was designed to detect external intrusion and certification techniques, enabling them to detect external intrusions.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.10-16
• /
• 2005

Recently, the international regulations about the exhaust emissions of the motorcycle have been strengthened. The electrically controlled fuel injection type motorcycle has been emphasized to meet with this regulation. However, since the pulsation phenomenon happens in the intake port of the motorcycle because of the characteristic of high speed and the smaller layout than the passenger car, there are many difficulties to select the factor about control parameters needed to develop the ECU system. In this paper, the pulsation values measured from the engine test were compared with the calculated one by WAVE, and it was analyzed the pulsation characteristic according to the driving condition and estimated the mass flow rate. This research showed that the lowest point of the pressure gets lowin the low load and the pulsation of pressure were increased in the high load. Also, the simulation program was verified by showing good prediction of the pulsation and air mass flow rate.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.37-43
• /
• 2010

The purpose of this paper is to investigate the effect of air-fuel ratio on the combustion and emissions characteristics of spark ignition (SI) gasoline engine fueled with bio-ethanol. A 1.6L SI engine with 4 cylinders was tested on EC dynamometer. In addition, lambda sensor and lambda meter were connected with universal ECU to control the lambda value which is varied from 0.7 to 1.3. The engine performance and combustion characteristics of bio-ethanol fuel were compared to those obtained by pure gasoline. Furthermore, the exhaust emissions such as carbon monoxide (CO), unburned hydrocarbon (HC), oxides of nitrogen ($NO_X$) and carbon dioxide ($CO_2$) were measured by emission analyzers. The results showed that the brake torque and cylinder pressure of bio-ethanol fuel were slightly higher than those of gasoline fuel. Brake specific fuel consumption (BSFC) of bio-ethanol was increased while brake specific energy consumption (BSEC) was decreased. The exhaust emissions of bio-ethanol fuel were lower than those of gasoline fuel under overall experimental conditions. However, the specific emission characteristics of the engine with bio-ethanol fuel were influenced by air-fuel ratio.

• 산업공학
• /
• 제25권4호
• /
• pp.393-404
• /
• 2012

Increasing safety requirements of automobile are asking companies to find out solutions, based on the ISO 26262 which is a functional safety standard. ISO 26262 is an adaptation of the IEC 61508 for automotive electric/electronic systems. ISO 26262 provides a V model for ECU (Electronic Control Unit) development process to secure safety against vehicle. It well describes the requirements, necessary works and their resulting products for each development phase. However, it is difficult to apply to product development for achieving functional safety in the electric/electronic systems of an automobile because it lacks explanation on the working steps to follow and the methodologies and tools to be used in each step. In this paper, we introduce the outline of the ISO 26262 product development process and present a DFSS (Design For Six Sigma) road-map based on the ISO 26262 product development process as a way to operate efficiently the ISO 26262 product development process. The DFSS road-map consists of five phases: Define, Measure, Analyze, Design, and Verify. The detailed activities, tools, inputs, and work products are given for each phase.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.15-21
• /
• 2010

A differential case equipped with LSD(limited slip differential) has several advantages over a normal type for rear wheel drive vehicles. Specially, the torque distribution can be done between left and right drive wheel in the state of limited slip differential. Also although LSD types are very various according to operating type, medium and torque distribution, a multi-clutch type is generally applied to rear wheel drive vehicles. So, this study presents the analysis of design parameters for development of a friction plate for multi-clutch type LSD using vehicle road test, the simulation of analytical model and the development of vehicle dynamics model by a benchmark product. According to this investigation, the design parameters which are pre-load of coil spring, friction plate and contact area quantity, friction coefficient and TBR(torque bias ratio) for a friction plate are derived from experiment and simulation and consequently, vehicle dynamics model has been constructed for the development of friction plate for multi-clutch type LSD.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.245-249
• /
• 2010

현재 차량에서 일반적으로 많이 쓰이고 있는 변속 스위치의 방법은 전위차를 신호로하는 접촉식이다. 접촉식은 신호전달에 있어서 정확한 방식의 하나이지만 장시간 사용 시 접촉면의 노후화로 인하여 수명이 짧아진다. 비 접촉 방식으로 사용될 수 있는 자기센서를 사용 한다면 접촉면의 노후화를 해결 할 수 있다. 본 논문에서는 자기센서의 특징을 살려서 비 접촉식 방법으로 차량용 변속스위치에 적용 하여 기존 접촉식 방법의 문제를 해결하였다. 센서 출력 전압은 가변적인 전위차를 가지는데 스위치의 각동에 따라 통상 0mV에서 150mV의 값을 가진다. 본 연구에서는 5개의 상태 신호에 대한 두 개의 사인 신호를 사용 하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.301-303
• /
• 2015

디지털 운행기록장치는 대한민국의 경우 2011년부터 상용차에 대해 법령으로 장착이 의무화되었다. 이 장치는 자동차의 속도, 주행거리, 브레이크 상태, GPS 위지청보 등을 수집하는 기록 장치로서 이를 통해 수집된 정보로 운전 형태를 파악하고 분석해준다. 그러나 초기 장치 구입비용과 전송 방식에 따른 월별 통신서비스 비용 때문에 일반 운전자의 사용이 제한된다. 따라서 본 연구는 일반 운전자도 위험운전행동을 분석하고 파악하여, 결과를 제공하는 스마트폰 어플리케이션의 설계 및 구현을 목적으로 한다. ECU(Electronic Control Unit)에서 얻을 수 있는 주행 데이터(가속 제동, 속도, 운전 시간 등)를 OBD-II(On-Board Diagnostic version II) Scanner를 통해 수집한다. 이 정보를 바탕으로 위험운전평가 알고리즘을 이용하여 실시간 분석한다. 상기 알고리즘은 대한민국의 교통안전공단에서 제공하는 위험운전(11종)에 대한 정의를 바탕으로 한다. 이를 통해 분석된 결과는 실시간으로 사용자에게 제공되며, SQLite를 이용하여 DB에 저장되고 통신사의 이동통신(3G,4G) 혹은 Wifi의 네트워크를 이용하여 연계 서버에 전송된다. 이 위험 운전 분석 어플리케이션을 통해 운전자들의 안전 운전을 유도하고자하며, 추후 운전습관 연계 보험의 도입에 따라 합리적이고 공정한 데이터를 제공하고자 한다.

• 센서학회지
• /
• 제25권2호
• /
• pp.155-159
• /
• 2016

In this work, we have developed a test system to examine whether the charge indicator of the plug-in hybrid electric vehicle (PHEV) works properly or not. In PHEV, the driver should charge the necessary electricity by plugging in manually and be able to know the charging status through the charge indicator conveniently located for the charging individual. Our system used the CAN bus to transmit the same commands from ECU to the indicator to test the proper operation of the indicator lights. It measured the electric current values during operation and analyzed to determine the quality of the indicators. The inspection items included the proper packaging, the electrical shorts, the LED lighting during charging, the LED lighting for charging failure, and the LED lighting when errors occur. We developed the system for the operators in the factory allowing them to approve the test results at the site. We developed the hardware, the control software, and the software to store the test results and the history of the products in the database. Serial numbers were given to the good quality products and the bar code labels were printed to trace the products afterwards. Through this work, we developed a system to inspect the electric parts in real time upon fabrication. We are planning to further improve our system to inspect the brightness of the indicator by adding the vision inspection in future.

• 대한임베디드공학회논문지
• /
• 제9권2호
• /
• pp.87-99
• /
• 2014

An AUTomotive Open System ARchitecture (AUTOSAR) is a de-facto standardized software platform, which developed for an automotive Electronic Control Unit (ECU) in global automotive industry. AUTOSAR improves the reusability and the scalability, thus the software development can be easier, faster and more reliable. However, it requires a lot of time and efforts to develop an AUTOSAR software due to the difficulties of understanding of massive AUTOSAR documentations and complicated usage of AUTOSAR design tools. AUTOSAR training is offered by AUTOSAR design tool venders but it is limited to introduction of their simplified concept and usages based on PC. Therefore the training is not enough for industrial developers or graduate students. In this paper we present an AUTOSAR starter kit which allows industrial engineers and graduate students to practice the detailed process of AUTOSAR software development easily and more conveniently. The kit is composed of a practical environment similar to actual automotive system and a textbook that explains how to design AUTOSAR software. And we demonstrated the validity of our methodology based on a case study.