Browse > Article

The Characteristics of Pressure Pulsation according to Operating Condition of a S.I Engine for Motorcycle  

Lee Kihyung (Department of Mechanical Engineering, Hanyang University)
Nam Hosung (Hyundai Motor Company)
Kim Yongla (Graduate School, Hanyang University)
Bae Jaeil (Kefico Corporation)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.13, no.3, 2005 , pp. 10-16 More about this Journal
Abstract
Recently, the international regulations about the exhaust emissions of the motorcycle have been strengthened. The electrically controlled fuel injection type motorcycle has been emphasized to meet with this regulation. However, since the pulsation phenomenon happens in the intake port of the motorcycle because of the characteristic of high speed and the smaller layout than the passenger car, there are many difficulties to select the factor about control parameters needed to develop the ECU system. In this paper, the pulsation values measured from the engine test were compared with the calculated one by WAVE, and it was analyzed the pulsation characteristic according to the driving condition and estimated the mass flow rate. This research showed that the lowest point of the pressure gets lowin the low load and the pulsation of pressure were increased in the high load. Also, the simulation program was verified by showing good prediction of the pulsation and air mass flow rate.
Keywords
오토바이;맥동;공기청정기;질량 유동율;곡률 손실;
Citations & Related Records
연도 인용수 순위
  • Reference
1 M. Kato, 'Present Situations and Future Prospects for Motorcycles,' Review of Automotive Engineering, Vol.57, No.1, JASE 20034035, 2003
2 J. J. Silvestri, T. Morel, M. Costello, 'Study of Intake System Wave Dynamics and Acoustics by Simulation and Experiment,' SAE940206, 1994
3 K. S. Park, S. G. Go, S. T. Ro, J. W. Lee, 'Characteristics of the Air Flow Variation by Throttle Step Change in a Gasoline Engine,' Transactions of the KSAE, Vol.4, No.3, pp.92-101, KSAE 96370053, 1996
4 R. N. Noyes, 'Analytical Prediction of Discharge Coefficients for Engine Poppet Valve,' General Motors Research Publication, July 21, 1980
5 K. H. Lee, 'Development of Evaluation Method for Intake Flow Characteristics in a Gasoline Engine,' Journal of the Research Institute of Industrial Sciences, Vol.40, pp.241-251, 1995
6 I. E. Idelchik, Handbook of Hydraulic Resistance, 3rd ed., Boca Raton, FL : CRC Press, c1994