• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2192-2193
• /
• 2011

VCU(Vehicle Control Unit) was developed to decrease the wire weight and make it easy to control the power of ECU in bimodal tram. VCU consists of CC(Central Computer), DU(Display Unit), TU(Terminal Unit) with PCB. CC is a main controller with progamming and DU displays the status with graphic symbols and letters. TU with PCB inputs and output the voltage controlled by CC. They communicate with CAN(Controller Area Network). VCU had been verified with software reliability verification test and environmental hardware test. This paper has shown the test results and application to bimodal tram.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.130.6-130
• /
• 2001

On-Board diagnostic systems are installed in passenger cars and light trucks on today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. This wa primarily to meet EPA emission standards. The CARB requires that, by model year 1996, all vehicle sold in California contain a certain minimum "On-Board Diagnostic" capability to diagnose emissions-related failures of the engine control system. These diagnostic requirements have been designated as OBD with a goal of monitoring all of the emissions-related components on-board the vehicle for proper operation. Part of the intent of CARB´s OBD program is that a single diagnostic tester can be used to read the diagnostic information from any OBD-compliant vehicle. A tester which ...

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.208-213
• /
• 2008

In order to assess the reliability of the electronics control unit for vehicles, accelerated life test model and procedure are developed. By using this method, failure mechanism and life distribution are analyzed. The main results are as follows : i) the main failure mechanism is degradation failure that is, junction destruction of a semiconductor resin by high temperature. ii) the life distribution of the electronics control unit for vehicles is fitted well to Weibull life distribution and the accelerated life model of that is fitted well to Arrhenius model. iii) at the result of the life distribution, accelerated life test method is developed, and test time for life assessment will be shortened by 5,000 hours by this test method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.68-74
• /
• 2014

As the number of ECUs (Electronic control units) are increasing, reliability and functional stability of a software in an ECU is getting more important. Therefore the application of functional safety standards ISO 26262 is making the software more reliable. Software fault injection test (SFIT) is required as a verification technique for the application of ISO 26262. In case of applying SFIT, an artificial error is injected to inspect the vulnerability of the system which is not easily detected during normal operation. In this paper, the basic concept of SFIT will be examined and the application of SIFT based on ISO26262 will be described.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.307-308
• /
• 2007

At present, there are unnecessary electrical consumes and a lot of fuel-losses by the vaporized gas due to the rising of fuel temperature because the fuel pump of the fuel supply system rotates regularly regardless to the driving condition. In this paper, we designed the multi-step controller for controlling fuel pump to supply fuel according to RPM of each moment by measuring the real time RPM of the engine at ECU of the vehicle. Also, it can judge the existence or nonexistence of disorder by measuring the pressure of the fuel supply line, in case of abnormal state, it can supply the fuel intelligently by changing the mode to self-compensation mode.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.646-654
• /
• 2010

This paper describes an integrated chassis control for a maneuverability, a lateral stability and a rollover prevention of a vehicle by the using of the ESC and AFS. The integrated chassis control system consists of a supervisor, control algorithms and a coordinator. From the measured and estimation signals, the supervisor determines the vehicle driving situation about the lateral stability and rollover prevention. The control algorithms determine a desired yaw moment for lateral stability and a desired longitudinal force for the rollover prevention. In order to apply the control inputs, the coordinator determines a brake and active front steering inputs optimally based on the current status of the subject vehicle. To improve the reliability and to reduce the operating load of the proposed control algorithms, a multi-core ECU platform is used in this system. For the evaluation of this system, a closed loop simulations with driver-vehicle-controller system were conducted to investigate the performance of the proposed control strategy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.160-165
• /
• 2003

The design and implementation of an engine control system has become an important area in developing a new car, but the implementation of an engine control system is becoming a tedious and time-consuming work as the level of complexity increases. In order to shorten the development cycle of the control system, rapid control prototyping (RCP) technique deserves developers' attention. A new RCP platform has been developed for an automotive engine control application. This prototyping system strictly adheres to the layered architecture of the final production ECU, and separates the automatically generated part of software, or the application area, from the hand coded area, which generally carefully designed and tested because of the hardware dependency and the efficiency of microcontroller. The $Matlab{\circledR}$ tool-chain of Mathworks Inc. has been selected as a base environment in this study. A newly developed Engine Control Toolbox of Real-Time $Workshop{\circledR}$ converts a graphically represented control algorithm into optimized application codes and links them with other parts of the software to generate executable code for the target processor.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.148-154
• /
• 2012

Purpose: In order to improve road-friendliness of heavy vehicles, a fuzzy hybrid control strategy consisting of a hybrid control strategy and a fuzzy logic control module is proposed. The performance of the proposed strategy should be effectively evaluated using a hardware-in-the-loop (HIL) simulation model of a semi-active suspension system based on the fuzzy hybrid control strategy prior to real vehicle implementations. Methods: A hardware-in-the-loop (HIL) simulation system was synthesized by utilizing a self-developed electronic control unit (ECU), a PCI-1711 multi-functional data acquisition board as well as the previously developed quarter-car simulation model. Road-friendliness of a semi-active suspension system controlled by the proposed control strategy was simulated via the HIL system using Dynamic Load Coefficient (DLC) and Dynamic Load Stress Factor (DLSF) criteria. Results: Compared to a passive suspension, a semi-active suspension system based on the fuzzy hybrid control strategy reduced the DLC and DLSF values. Conclusions: The proposed control strategy of semi-active suspension systems can be employed to improve road-friendliness of road vehicles.

• Journal of Drive and Control
• /
• v.17 no.3
• /
• pp.47-56
• /
• 2020

As a shift control of automatic transmission was managed with the electronic control unit (ECU), shift quality which is a measure of shift shock during gear change has markedly improved. However, the initial clutch pressure control of the clutch filling phase should continue to rely on the predetermined control input since the input and output speeds are unchanged until the shifting process attains the inertia phase. It is critical to minimize the clutch response time and control the clutch pressure accurately at the end of clutch fill to achieve quick shift response and smoothness. Advanced transmission companies have adopted an auto calibration method which establishes the databases for the clutch piston fill-up attributes and the frictional characteristics of the disks. In this study, a distinctive auto calibration algorithm for forklift transmission under development is proposed and verified with the real-vehicle test. The experimental calibration results showed consistent turbine dynamics at the initial stage of shifts with the properly calibrated clutch-fill control parameters. By using this technique, it is necessary to finalize the shift control for the various operation conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1103-1106
• /
• 2005

The research and development for LPLI system to replace the conventional LPG fuel supply system has been processed with a view to enhancing the environmental status and the efficiency for LPG cars. Part of the small sized cars are under commercialization with the LPLI application already. And yet, most of the technologies are relied upon the advanced countries and as part of the application for large scaled engines, many researches are on the increase. This study shows the technology development to make use of LPLI system for those large engines and reviews the controllers, which were manipulated through experiments for their work, reliability and possibility for commercialization.