• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1051-1059
• /
• 2008

In the development process of an ECU (Electrical Control Unit), numerous tests are necessary to evaluate the performance and control algorithm. The vehicle based test is expensive and requires long time. Also, it is difficult to guarantee the safety of the test driver. To overcome the various problems faced in the development process, the ECU test has been done using HIL (Hardware In the Loop). The HIL environment has the actual hardware including an ECU and a virtual vehicle model. In this paper, the test platform environment is devloped for the AWS ECU black box test. The test platform is built on HIL (Hardware In the Loop) architecture. Using the developed test platform, the control algorithm of the AWS ECU can be evaluated under the virtual driving condition of the bi-modal tram. Driving conditions, such as a front steering angle and vehicle velocity, are defined through the PC (Personal Computer) input. Input signals are transformed to electrical signals in the PC. These signals become the input conditions of the AWS ECU. The AWS ECU is stimulated by arbitory input conditons, and responses of the system are observed.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.762-765
• /
• 2021

In this paper, an automotive ECU (electronic control unit) with Kalman filter accelerator is designed and implemented. RISC-V is exploited as a processor core. Accelerator for Kalman filter matrix operation, CAN (controller area network) controller for in-vehicle network, and LIN (local interconnect network) controller are designed and embedded. Kalman filter operation consists of time update process and measurement update process. Current state variable and its error covariance are estimated in time update process. Final values are corrected from input measurement data and Kalman gain in measurement update process. Usually floating-point multiplication is exploited in software implementation, but fixed-point multiplier considering accuracy analysis is exploited in this paper to reduce hardware area. In 28nm silicon fabrication, its operating frequency, area, and gate counts are 100MHz, 0.37mm², and 760k gates, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.90-93
• /
• 2009

Recently, CAN(Controller Area Network) being used in vehicle network system is suitable Network Protocol for smart vehicles with a future that need many ECUs, and it guarantees stability and reliability. It is revealed that being equipped many ECU could reduce the increasing of energy consumption and energy cost from the increasing of Wiring Harness's space and weight. In this paper, future smart vehicle control Air conditioner and heater for convenient and comfortable driving as using CAN protocol and implement auto control system According to driver's requirement using temperature in the vehicle.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.132-137
• /
• 2004

On-Board Diagnostic(OBD) systems are in most cars and light trucks on the load today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. The CARB's diagnostic requirements to meet EPA emission standards have been designated as OBD with a goal of monitoring all of the emissions-related components, as well as the chassis, body, accessory devices and the diagnostic control network of the vehicle for proper operation. In this paper, we present a remote measurement system for the wireless monitoring of diagnosis signal and sensors output signals of ECU adopted KWP2000, united the OBD communication protocol, on OBD-compliant vehicle using the wirless communication technique of Bluetooth. In order to measure the ECU signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3C3410X is used for communicating ECU signals. The embedded system's software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on MicroC/OS kernel to communicate between bluetooth modules using bluetooth stack. The diagnostic system is developed using Visual C++ MFC and protocol stack of bluetooth for Windows environment. The self-diagnosis and sensor output signals of ECU is able to monitor using PC with bluetooth board connected in serial port of PC. The algorithms for measuring the ECU sensor output and self-diagnostic signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of self-diagnosis and sensor signals of ECU adopted KWP2000 in embedded system verified through the developed systems and algorithms.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.4
• /
• pp.593-607
• /
• 2013

The In-Vehicle-Networking(IVN) of modern cars is constituted by an small electronic control device called ECU. In the past, there was no way to be able to access the IVN of a driving car. so IVN has been recognized as a closed environment so there is no need to exist authentication protocol between devices which are to configure the internal network and to communicate with other devices. However, constant improvements made it possible to access the IVN in many different ways as the communication technology evolves. This possibility created a need for device authentication in IVN. HB-Family are representative authentication schemes in RFID environment which has similar restrictions to IVN. In this paper, we propose an implementation method of HB-Family for device authentication between ECU considering ECU has low computing power and the message field of CAN protocol has restricted size of 8 bytes. In order to evaluate the efficiency and availability of the authentication schemes adopted our method, we have evaluated the performance based on DSP-28335 device. Further, it was possible to improve the efficiency rate of at lest 10%, up to 36%, and we then analyze this result in various aspects of the IVN.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.159-165
• /
• 2013

ESD damage by Charged Cable Model (CCM) is introduced. Due to its own impedance characteristic unlike Human Body Model (HBM) or Machine Model (MM) electric component can be destroyed even though it is located after typical protection circuit. Possible mechanism of ESD damage to automotive electric control unit (ECU) in vehicle environment by CCM discharge was investigated. Based on investigation, field-returned vehicle whose ECU is expected to be damaged by CCM discharge was tested to reproduce it and similar electric component destruction inside ECU was observed. Suggestions to reduce the possibility of ESD damage by CCM are introduced.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.247-258
• /
• 2017

Since 2016 when the regulations related to vehicle structure and device modification were drastically revised, the car tuning market has been growing rapidly. Particularly, many drivers are showing interest in changing the interior and exterior according to their preference, or improving the specifications of their cars by changing the engine and powertrain, among others. Also, as the initial engine settings such as horse power and torque of the vehicle are made for stable driving of the vehicle, it is possible to change the engine performance, via Engine Control Unit (ECU) mapping, to the driver's preference. However, traditionally, ECU mapping could be only performed by professional car engineers and the settings were also decided by them. Therefore, this study proposed a system that collects data related to the driver's driving habits for a certain period and sends them to a cloud server in order to analyze them and recommend ECU mapping values. The traditional mapping method only aimed to improve the car's performance and, therefore, if the changes were not compatible with the driver's driving habits, could cause problems such as incomplete combustion or low fuel efficiency. However, the proposed system allows drivers to set legally permitted ECU mapping based on analysis of their driving habits, and, therefore, different drivers can set it differently according to the vehicle specifications and driving habits. As a result, the system can optimize the car performance by improving output, fuel efficiency, etc. within the range that is legally permitted.

• Journal of Convergence for Information Technology
• /
• v.9 no.7
• /
• pp.25-32
• /
• 2019

This paper proposes the method of an in-vehicle gateway to reduce the reprogramming time for the ECU (Electronic Control Unit). In order to reduce the reprogramming time, the gateway must prohibit transmitting messages, that are not related to reprogramming, to the destination CAN network, and no ECU should diagnose the DTC(Diagnostic Trouble Code) that indicates CAN communication error caused by prohibiting CAN messages by the gateway. Moreover, STmin, which are the minimum time between two consecutive CAN messages, should be minimized. In order to do this, this paper proposes the method that uses the link control command specified in UDS(Unified Diagnostic Services) and hardware based gateway functionality that are supported by the latest MCU(Micro Controller Unit). The proposed method is developed using TC275 based embedded system, and its results are presented.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.23-29
• /
• 2007

In Korea, the number of LPG vehicles is increasing continuously because LPG is cheaper than Gasoline. Also in Europe, the CNG fuel is a good solution to meet $CO_2$ regulation. In order to use LPG/CNG fuel, new EMS ECU must be developed for every type of vehicles and it requires huge development cost. In order to reduce development cost and time, SIEMENS VDO has developed an Interface Box. It supports EMS ECU in the car and manages LPG/CNG fuel injection system. Basically the Interface box can be used with any kind of EMS ECU. The Interface Box controls LPG/CNG injector through the injection command of gasoline EMS ECU. It calculates required amount of based on the fuel temperature and pressure and sends feedback signal to ECU for fuel correction. Also, it controls LPG/CNG specific actuator such a Shut off valves and LPG switch inputs.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.9
• /
• pp.21-31
• /
• 2013

ECU(Electric Control Unit) on the important features of the vehicle is equipped, ECU between sending and receiving messages is connected to one of the internal network(CAN BUS), but this network easily accessible from the outside and not intended to be able to receive attacks from an attacker, In this regard, the development of tools that can be used in order to verify the possibility of attacks on attacks from outside, However, the time costs incurred for developing tools and time to analyze from actual car for CAN messages to be used in the attack to find. In this paper, we want to solve it, propose a method to generate test cases required for the attack is publicly available tool called Sulley and it explains how to find the CAN messages to be used in the attack. Sulley add the CAN messages data generated library files in provided library file and than Sulley execute that make define and execute file conform to the CAN communication preferences and create message rules. Experiments performed by the proposed methodology is applied to the actual car and result, test cases generated by the CAN messages fuzzing through Sulley send in the car and as a result without a separate tool developed was operating the car.