• Journal of the Korean Vacuum Society
• /
• v.4 no.S1
• /
• pp.138-144
• /
• 1995

It is commonly believed that high permittivity materials will be necessary for future high density Gbit DRAMs. In a first part, we explain the choice of SrTiO3 by ECR MOCVD for Gbit-scale DRAMs. In a second part, after describing the ECR MOCVD system and presenting the requirements SrTiO3 thin films should meet for use in Gbit-scale DRAMs, the physical and electrical properties of srTiO3 thi film prepared by ECR MOCVD are then studied. A stacked capacitor technology, suitable for use in 1 Gbit DRAM, and comprising high permittivity SrTiO3 thin films prepared by ECR MOCVD at $450^{\circ}C$ on electron beam and RIE patterned RuO2/TiN storage nodes is finally described.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.44-53
• /
• 2003

Cu/C films were prepared at room temperature under $Cu(hfac)_2-Ar-H_2$ atmosphere in order to obtain metallized polymer by using ECR-MOCVD(Electron Cyclotron Resonance Metal Organic Chemical Vapor Deposition) coupled with a DC bias system. The room temperature MOCVD on polymer substrate could be possible by collaboration of ECR and a DC bias. Structural analysis of the films by ECR was found that fine copper grains embedded in an amorphous polymer matrix with indistinctive interfacial layer. The increase in $H_2$ contents brought on copper-rich film formation with low electric resistance. On the other hand carbon-rich films with low sheet electric resistance were prepared in argon atmosphere. The electric sheet resistance of Cu/C films with good interfacial property were controlled at $10^8$~$10^0$ Ohm/sq. ranges by the $H_2$/Ar mole ratio and the shielding effectiveness of the film showed maximum up to 45dB in the our experimental range.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.94-98
• /
• 2005

$RuO_2$ is widely studied as a lower electrode material for high dielectric capacitors in DRAM (Dynamic Random Access Memories) and FRAM (Ferroelectric Random Access Memories). In this study, the effects of hydrogen, oxygen, and argon Electron Cyclotron Resonance (ECR) plasma pretreatments on deposited by Metal Organic Chemical Vapor Deposition (MOCVD) $RuO_2$ nucleation was investigated using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM) analyses. Argon ECR plasma pretreatment was found to offer the highest $RuO_2$ nucleation density among these three pretreatments. The mechanism through which $RuO_2$ nucleation is enhanced by ECR plasma pretreatment may be that the argon or the hydrogen ECR plasma removes nitrogen and oxygen atoms at the TiN film surface so that the underlying TiN film surface is changed to Ti-rich TiN.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.163-163
• /
• 2003

TiN barrier막 위에 metal organic chemical deposition(MOCVD)법으로 RuO$_2$ 를 증착시 TiN막 표면을 세정처리하지 않을 경우 RuO$_2$의 핵생성이 어렵고, 그로 인해 RuO$_2$ 연속막이 형성되기 힘들다. 그러므로 RuO$_2$의 핵생성을 향상시키기 위해 TiN막에 대한 전처리 세정이 필수적이다. TiN막의 전처리 세정방법으로 ECR plasma 세정법을 사용하였으며, $O_2$ plasma와 H$_2$ plasma 그리고 Ai plasma를 이용해 각각의 exposure time을 변화시키며 전처리 세정을 실시하였다. H$_2$ plasma와Ar plasma의 exposure time이 증가됨에 따라 RuO$_2$의 핵생성이 향상되었다. 본 연구에서는 scanning electron microscopy(SEM), Auger electron emission spectrometry(AES), Atomic Force Microscope(AFM), X-ray diffraction (XRD) 등의 분석을 통해 TiN막 표면에 대한 ECR plasma 전처리 세정 이 RuO$_2$의 핵생성과 연속막 성장에 미치는 효과에 대해 조사하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.34-46
• /
• 2004

Copper films were prepared by using ECR-MOCVD(Electron Cyclotron Resonance Metal Organic Chemical Vapor Deposition) coupled with a DC bias system. The DC bias is connected to the electrode which placed 1∼3cm above the polymer substrate. The pulse electrical field around the electrode attracts the positive charged copper ions generated from the dissociation of copper precursor, $Cu(hfac)_2$, under ECR plasma. Condensation of supersaturated copper ions in the space between the electrode and substrate, makes it possible to deposit copper film on the polymer substrate even at room temperature. In this study, optimization of the electrode configuration was carried out in order to obtain the uniform films. The uniformity of the deposited films were closely related to the parameters of electrode geometry such as electrode shape, thickness, grid size and the spacing between electrodes. The most uniform copper film was observed with the electrode that enabled uniform electrical field distribution across the whole dimension of electrode.

• Korean Journal of Materials Research
• /
• v.14 no.3
• /
• pp.203-210
• /
• 2004

Effects of various pretreatments on the adhesion of copper-coated polymer films were investigated. Copper-coated polymer films were prepared by an electron cyclotron resonance-metal organic chemical vapor deposition (ECR-MOCVD) coupled with a DC bias system at room temperature. PET(polyethylene terephthalate) film was employed as a substrate material and it was pretreated by industrially feasible methods such as chromic acid, sand-blasting, oxygen plasma and ion-implantation treatment. Surface characterization of the copper-coated polymer film was carried out by AFM(Atomic Force Microscopy) and FESEM(Field Emission Scanning Electron Microscopy). Surface energy was calculated by based on the value of the contact angle measured. The adhesion of copper/PET films was determined by a pull-off test according to ASTM D-5179. It was found that suitable pretreatment of the PET substrate was required for obtaining good adhesion property between copper films and the substrate. In this study the highest adhesion was observed in sand-blasting, and then followed by those of acid and oxygen plasma treatment. However, the effect of surface energy was insignificant in our experimental range. This is probably due to compensating the difference in surface energy from various pretreatments by exposing substrate to ECR plasma for 5 min or longer at the early stage of the copper deposition. Therefore, it can be concluded that surface roughness of the polymer substrate plays an important role to determine the adhesion of copper-coated polymer for the deposition of copper by ECR-MOCVD.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.85-91
• /
• 2005

$SnO_2$ films were prepared at room temperature under a $(CH_3)_4Sn-H_2-O_2$ atmosphere in order to obtain transparent conductive polymer by using ECR-MOCVD (Electron Cyclotron resonance -Metal Organic Chemical Vapor Deposition) system. The electrical properties of the films were investigated as function of process parameters such as deposition time, microwave power, magnetic current power, magnet/showering/substrate distance and working pressure. An increase in microwave power and magnetic current power brought on $SnO_2$ film formation with low electric resistivity. On the other hand, the effects of process parameters described above on optical properties were insignificant in the range of our experimental scope. The transmittance and reflectance of the films prepared by the ECR-MOCVD exhibited their average values of 93-98% at wave length range of 380-780 nm and 0.1-0.5%, respectively. The grain size of the $SnO_2$ films that are also insensitive with the process parameters were in the range of 20-50 nm. On the basis of experimental data obtained in the present study, electrical resistivity of $7.5{\times}10^{-3}ohm{\cdot}cm$, transmittance of 93%, and reflectance of 0.2% can be taken as optimum values.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.120-120
• /
• 2003

MOCVD법으로 TiN 표면에 Ru을 증착함에 있어서 Ru의 핵생성을 고양시키기 위한 ECR plasma 전처리 세정이 필요하다. 본 연구에서는 Ru 증착시 ECR $H_2O$$_2$, AE Plasma 전처리 세정 효과를 SEM, AES, XRD로 분석하였다. Ru의 핵생성은 ECR H$_2$, Ar Plasma의 노출시간이 증가할수록 향상된 반면, ECR $O_2$ plasma의 경우 노출시간이 증가할수록 핵생성 효과는 감소하였다. H$_2$ plasma 내의 H$_2$ion은 Ti와 NH$_3$를 형성하기 위해서 TiN과 반응하여 TiN을 Ti로 개질 시켰으며, Ar plasma 전처리 세정하는 동안 Ar plasma 내의 Ar ion은 TiN 또는 TiON 표면의 질소와 산소원자를 제거하는 효과를 나타내었다. 그 결과 TiN 표면상에서도 Ru의 핵생성이 쉽게 이루어졌으며 H$_2$, Ar ECR Plasma 전처리 세정에서 RU 핵생성이 향상되는 결과를 얻었다. 세 종류의 plasma중에서 Ar ECR plasma로 전처리 세정한 경우에 가장 높은 Ru 핵생성 밀도를 얻을 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.131.2-131.2
• /
• 2007

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.196-196
• /
• 2002