• Korean Journal of Materials Research
• /
• v.22 no.2
• /
• pp.71-77
• /
• 2012

When a new bonding agent using coal ash is utilized as a substitute for cement, it has the advantages of offering a reduction in the generation of carbon dioxide and securing the initial mechanical strength such that the agent has attracted strong interest from recycling and eco-friendly construction industries. This study aims to establish the production conditions of new hardening materials using clean bottom ash and an alkali activation process to evaluate the characteristics of newly manufactured hardening materials. The alkali activator for the compression process uses a NaOH solution. This study concentrated on strength development according to the concentration of the NaOH solution, the curing temperature, and the curing time. The highest compressive strength of a compressed body appeared at 61.24MPa after curing at $60^{\circ}C$ for 28 days. This result indicates that a higher curing temperature is required to obtain a higher strength body. Also, the degree of geopolymerization was examined using a scanning electron microscope, revealing a micro-structure consisting of a glass-like matrix and crystalized grains. The microstructures generated from the activation reaction of sodium hydroxide were widely distributed in terms of the factors that exercise an effect on the compressive strength of the geopolymer hardening bodies. The Si/Al ratio of the geopolymer having the maximum strength was about 2.41.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.316-325
• /
• 2009

Fe based (Fe$_{68.2}$C$_{5.9}$Si$_{3.5}$B$_{6.7}$P$_{9.6}$Cr$_{2.1}$Mo$_{2.0}$Al$_{2.0}$) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The experiment results show that the as-prepared Fe amorphous powders less than 90 $\mu$m in size has a fully amorphous phase and its weight fraction was about 73.7%. The as-atomized amorphous Fe powders had a complete spherical shape with very clean surface. Differential scanning calorimetric results of the as-atomized Fe powders less than 90 $\mu$m showed that the glass transition, T$_g$, onset crystallization, T$_x$, and super-cooled liquid range $\Delta$T=T$_x$-T$_g$ were 512, 548 and 36$^{\circ}C$, respectively. Fe amorphous powders were mixed and deformed well with 10 wt.% Cu by using AGO-2 high energy ball mill under 500 rpm.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.47-53
• /
• 2012

As one of the methods for recycling the FRP from the waste ships, separation of roving layer from the mat has some merits in a sense of the eco-friendly and economical recycling process. Similar characteristics, however, between the roving and the mat even with different ratio of the resin and the glass and the thickness of the roving, much thinner than the mat, make the mechanically automatic differentiation difficult. In this study spectrochemical differentiation between the two layers has been made using boiling concentrated sulfuric acid, methanol and isopropanol solution saturated with KOH, or hydrogen fluoride (HF) solution. Furthermore efficiently coloring water-soluble dye following the HF treatment makes the roving layer more distinguishable photophysically. The layer differentiation and the automatic layer distraction move up the date of simple and automatic separation process for the waste FRP.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.3
• /
• pp.167-172
• /
• 2007

Since 1990s, these many researchers have been fully involved in developing recycling methods for FRP boats. There are four basic classes of recycling covered in the literature. the first is "Mechanical recycling" which involves shredding and grinding of the scrap FRP in a new product. Despite of the safety hazards, mechanical recycling is one of the simpler and more technically proven methods. Recent researchers should be more interested in these methods. It is fact that most of FRP wastes are depended on incineration or reclamation. Because it Is made up of reinforced fiber glass, it is very difficult to break into pieces. By the disposing of waste FRP this way, it also occurs secondary problem such as air pollution and unacceptable noise. This study is to propose a new method which is efficient and environment friendly waste FRP regenerating.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.149-167
• /
• 2001

Today, every culture has taken on the compromise form by means of the cultural difference, variety, and pluralism according to the internationalization and the advance so that it has been developed toward the half-blooded and multilayered the aspect. In accordance with this current of the times, this thesis observed the feminism found in the multiculturism of the end of the 20th century, the third world, and technology with the side of the tendency of modern fashion, considered the hybride phenomenon which is pulling down the wall between culture and genre due to the social diversification. and predicted the fashion trend do 21st century serf on it. Multiculturism is the movement that began to arise in the academic world of America and the literary world form the close of 1980's in accepting the variety of culture and regarding the culture with the more balanced and wide view and just as it is, it means the attitude of accepting one or more cultures of variely and the position of taking interest in the culture of minority race not the culture of a governing race. It is the fashion of feminism adapts dualism like unisex, androgynous look, etc of bisexual lendency in the 1980's, it shows new style with crossover of liberal sense because there is not the difference of sex in fashion. The eco-feminism pursues the natural sexuality not being instrumental and dismantling and expressed it in the Gender expression of an integrated human being. The trend of ethnic fashion in the close of 20th century is that the element of hippie is working so strongly. By adding embroidery of Oriental style, accessories of Indian style, feathers, beads, a hempen hood to the ethnic costumes of Asia and Latin, is shows the figure of ethnic hippie. As the cycler fashion is the future clothes through technology of computer, it uses a cool glass material bringing up the image of a spacesuit in order to expresses cyber image through artificial color combination of sheen colors, Though this techno-color fashion has established the fresh stimulation and the innovative aspect with ultramodern materials and image of futurism, it transmits a hope of estranged people and the natural elements. Hybride means a cross and mixture of animal and plant in Korean and is also called fusion. The phenomenon of hybrid predicts to comes the period of a cross and variation because something completely new comes into the world by contamination, mixture and compromise through meeting something different each other and it has on advantage of developing something existing to one more stage. It is prospected that in the society of 21st century, the borderline of traditional gender will be disappeared, variety and individuality will determine the individual behavior, and the masculine value will be substituted by feminine value. In the society giving priority to feminine value, a fashion stuck closely to women is what must reflect lives of woman under the proposition of woman's beauty, being on original function. So, it is considered that a fashion with added convenience and practicality having the function which is easy to put on, comfortable to act, able to express solves so much, and able to show various appearances according to T.P.O will get into the spotlight.

• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.173-182
• /
• 2016

Although the ecosystem extends numerous functions for the benefit of humankind, construction of horticultural facilities can potentially lead to the degeneration of some of these functions owing to the expansion of impervious regions and loss of habitats. Thus, this study aimed to examine the effect of construction of horticultural facilities on plant biodiversity. Analysis of the vegetation distribution characteristics showed that horticultural facilities had significantly lower plant diversity than did rice paddies. Hence, the proposed approach involved low-impact development, arrangement of habitat space, plant preservation, restricted use of chemical fertilizer, habitat creation, and reduced preservation cost. Lifestyle analysis suggested the importance of developing favorable environments for the growth of annual plants and aquatic plants. In all, 20 species of naturalized plants belonging to 10 families were identified. Furthermore, the proportion of these naturalized plants was higher in glass greenhouses and multi-span greenhouses, suggesting the advantages of employing natural soil mulching while avoiding concrete mulching. Statistical analysis was performed to validate the results, which suggested that impervious regions be converted to natural soils. Collectively, the findings of this study are expected to be used for establishing policies for the construction of eco-friendly and ecological horticultural facilities; this may aid the maintenance of sustainable agricultural landscapes and large-scale development of the reclaimed lands.

• The Korean Journal of Ecology
• /
• v.24 no.2
• /
• pp.93-100
• /
• 2001

One-year-old cottonwood (Populus deltoides Bartr.) clones, which were classified as sensitive or tolerant, were exposed to 150 n1/1 ozone (O$_3$) over 8 days for 8 hours each day under glass chamber conditions with natural sunlight. The leaves of the sensitive clone had black stipple and bifacial necrosis after $O_3$ treatment. Photosynthesis and stomatal conductance were measured before, during, and after the $O_3$ treatment. The photosynthetic rates due to $O_3$ treatment were decreased 51 percent and 34 percent on the sensitive and tolerant clone, respectively. The stomatal conductance of the sensitive clone was more than 40 percent higher than that of the tolerant clone regardless of the $O_3$ treatment. As light intensity increased, the $O_3$ effect on photosynthesis was clear. Compared to the previous growth chamber studies, our natural light exposure system was able to maintain a stable photosynthetic responses of the control treatment throughout the fumigation period. In addition, changes in assimilation versus intercellular $CO_2$ concentration (A/C curves) showed that $O_3$ decreased the slope and asymptote of the curves for the sensitive clone. This indicates that $O_3$ decreases the biochemical capacity of photosynthesis on the sensitive clone. Chlorophyll contents and fluorescence of the two clones were analyzed to examine the $O_3$ effects on photosystem 11, but $O_3$ did not impact these variables on either clone. Although the tolerant clone did not show any foliar injury, we could not find any ecophysiological defensive responses to $O_3$ treated. Stomatal conductance of the tolerant clone was originally much lower than that of the sensitive one. Thus, the mechanisms of the tolerant clone in this system are to narrowly open stomata and efficiently maintain photosynthesis with a more durable biochemical apparatus of photosynthesis under $O_3$ stress. The sensitive clone has higher photosynthetic capacity and more efficient light reaction activity than the tolerant one under charcoal filtered condition, but is not as resilient under stress.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.2
• /
• pp.218-221
• /
• 2002

Whole forage sorghum (saccharatum) cultivar FS5 was harvested at the soft dough ($303{\pm}9g\;kg^{-1}$ DM) stage of maturity. The sorghum was chopped into approximately 20 mm pieces and ensiled under laboratory conditions in 1.5 L Weck glass jars. At ensiling, it was treated with two commercial silage inoculants: Pioneer 1188 (Inoculant A) and Eco-corn (Inoculant B). The inoculant A and B was applied at ca $2{\times}10^5$ or $2{\times}10^4$ colony forming units $g^{-1}$ DM., respectively. Silage with no additives served as a control. Three jars per treatment were opened on days 2, 4, 8, 15 and 60 post-ensiling to study fermentation dynamics. After 60 days of ensiling the silages were analyzed and subjected to an aerobic stability test lasting 5 days. Results showed that both inoculants caused a more rapid rate of pH decrease and a higher amount of lactic acid production. All the silages were well preserved and were stable upon exposure to air. Inoculants did not influence (p>0.05) the ash and total N contents, but tended to reduce acetic acid (p<0.05), butyric acid (p<0.01) and propionic acid (p<0.01) contents, and to increase the lactic acid content (p<0.01). The lower DM content of silages treated with Inoculant A agrees with the greater gas loss resulting from the DM loss, which was in good agreement with the higher yeast counts upon aerobic exposure. Silage treated with inoculant B had the highest DM (p<0.05) and lactic acid contents (p<0.01), and the lowest acetic acid content (p<0.05), which agrees with the rapid reduction of pH and smaller gas loss. Inoculant B reduced the ADF (p<0.01), ADL and NDF (p<0.05) contents, which also indicates smaller losses of organic soluble material. The control silages contained the highest levels of volatile fatty acids but no lactic acid, indicating secondary fermentation. It was concluded that both inoculants may improve the fermentation process, since silages from all treatments were stable upon aerobic exposure, noadvantage could be attributed to any of the inoculants used.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.195-203
• /
• 2011

Eco-friendly materials or bio-composites were made with poly(lactic acid) (PLA) as matrix polymer and kenaf fibers as filler. Also, acetylated kenaf fibers and compatibilizer were adopted in order to improve the interfacial adhesion between fiber and polymer. In this study, the effect of chemical modification and compatibilizer on the mechanical-viscoelastic and morphology properties of the bio-composites was discussed. The hydrophobic fibers by acetylation were known to show better interfacial bonding with the matrix polymer and resulted in improved performance and morphology. Viscoelastic property and glass transition temperature, however, were not nearly enhanced.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.2
• /
• pp.73-83
• /
• 2015

When it comes to these buildings for business use, cooling load during summertime was reported to have great importance which, as a result, impressively increased interest in Solar Heat Gain Coefficient (SHGC). Such SHGC is considered to be lowered with the help of colors and functions of glass itself, internal shading devices, insulation films and others but basically, these external shading devices for initial blocking that would not allow solar heat to come in from outside the buildings are determined to be most effective. Of many different external shading devices, this thesis conducted an analysis on Exterior Venetian Blind. As for vertical shading devices, previous researches already calculated SHGC conveniently using concepts of sky-opening ratios. However in terms of the Venetian Blind, such correlation is not possibly applied. In light of that, in order to extract a valid correlation, this study first introduced a concept called shape factor, which would use the breadth and a space of a shade, before carrying out the analysis. As a consequence, the concept helped this study to find a very similar correlation. Results of the analysis are summarized as follows. (1) Regarding SHGC depending on the surface reflectance of a shade, an average of 2% error is observed and yet, the figure can always be ignored when it comes to a simple calculation. (2) As for SHGC of each bearing, this study noticed deviations of 4% or less and in the end, it is confirmed that extraction can be achieved with no more than one correlation formula. (3) When only the shape factor and nothing else is used for finding a correlation formula, the formula with a deviation of approximately 5% or less is what one would expect. (4) Since the study observed slight differences in bearings depending on ranges of the shape factors, it needed to extract a weighted value of each bearing, and learned that the smaller the shape factor, the wider the range of a weighted value. The study now suggests that a follow-up research to extract a simple calculation formula by dealing with all these various inclined angles of shade, solar radiation conditions of each region (the ratio of diffuse radiation to direct radiation and others) as well as seasonal features should be carried out.