• The Korean Journal of Quaternary Research
• /
• v.24 no.2
• /
• pp.1-11
• /
• 2010

Energy Balance Model (EBM) was used to experiment the distribution of surface equilibrium temperature which responds to external forcing associated with the surface characteristics. Surface equilibrium temperature is calculated as sum of incoming solar radiation and latitudinal transport is balanced with outgoing infrared radiation. To treat incoming solar radiation, the source of the earth energy, significantly for energy balance, the experiment for surface equilibrium temperature distribution was performed considering the energy balance with the latitudinal albedo change as well as land and sea distribution. In addition, linear albedo change experiment, arctic albedo 5%, 10%, 15% change experiments and the opposite albedo change experiments between arctic and mid-latitudes were performed using incoming solar radiation as an external forcing. Moreover, with and without ice-albedo feedback experiments were performed. Increasing of arctic albedo is blocked out the incoming solar radiation so that it induces decreasing of latitudinal heat transport. It is strengthened energy transport from low latitudes by keeping arctic low energy states. Therefore the temperature change in the mid-latitudes exhibits larger response than that of arctic due to the difference of transport. The land which has lower heat capacity than sea can be reach to equilibrium temperature shortly. Also land is more sensitive to temperature change with respects to albedo. Thus it induces the thermal difference between land and sea. As a result, the equilibrium temperature exhibits differently as the difference of albedo and heat capacity which are the one of surface characteristics. Surface equilibrium temperature decreases as albedo increase and the ratio of temperature change is large as heat capacity is small. The decreasing of surface equilibrium temperature with respects to increasing of linear albedo is accelerated by ice-albedo feedback. However local change of surface equilibrium temperature decreases non-linearly.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.63-65
• /
• 2003

The purpose of the study is to produce the surface ground temperature diagnostically using surface EBM with the use of GRID model in Geographic Information Systems (GIS). Certain characteristics have been analyzed for local slope effect, coastal effect and influence of high orographic aspect on the surface ground temperature. We present discussions on the meteorological responsibility for their temperature. The derived surface ground temperatures can be provided for comparison with those from satellite-based observ ation.

• The Journal of Korean Medicine
• /
• v.32 no.5
• /
• pp.41-49
• /
• 2011

Objectives: To optimize the preservation method of herbal decoction, we investigated the content of principle components of Pyungwi-san, liquiritin, glycyrrhizin, and hesperidin according to preservation temperature and period. We also investigated the changing patterns of pH and microbial population in Pyungwi-san decoction as a model case. Methods: With samples preserved at different temperatures, the content of liquiritin, glycyrrhizin, and hesperidin was determined using HPLC and microbial population was determined as viable counting method up to 8 times every month. Identification of isolated bacteria was performed by 16S rDNA analysis. Results: The content of liquiritin and glycyrrhizin did not change according to the preservation temperature and period, but that of hesperidin was severely decreased at room temperature. The isolate from the decoction was identified as Bacillus licheniformis by 16S rDNA sequence analysis. Microbial population appeared after 3 months' preservation and reached maximum value at 4 months; at all tested temperatures, the pH showed the lowest value (4.4-4.5) simultaneously. Conclusion: From the results, it seems to be that the microbial growth affects the pH of preserved decoction but not the change of liquiritin and glycyrrhizin content.

• Geophysics and Geophysical Exploration
• /
• v.22 no.1
• /
• pp.12-20
• /
• 2019

The first-arrival traveltime calculation method based on the damped wave equation overcomes the shortcomings of ray-tracing methods. Since this algorithm needs to solve the damped wave equation, numerical modeling is essential. However, it is not desirable to use the finite-difference method (FDM), which has good computational efficiency, for simulating the land seismic data because of irregular topography. Thus, the finite-element method (FEM) which requires higher computational cost than FDM has been used to correctly describe the irregular topography. In this study, we computed first-arrival traveltimes in an irregular topographic model using FDM incorporating embedded boundary method (EBM) to overcome this problem. To verify the accuracy and efficiency of the proposed algorithm, we compared our results with those of FEM. As a result, the proposed method using EBM not only provided the same accuracy as the FEM but also showed the improved computational efficiency.

• Geotechnical Engineering
• /
• v.12 no.2
• /
• pp.43-58
• /
• 1996

In spite of drastic development of underground technology too many uncertainties still exist in design and construction of underground structures. Estimation of ground parameters might be one of those uncertainties in design of underground structures. It is not an easy task to estimate the parameters reasonably well in advance in the design stage. The main purpose of this paper is the best parameter estimation in the underground structures. In order to estimate unknown model parameters from the in-eitu measurements as well as prior estimates, the Extended Bayesian Method(EBM) is utilized and implemented with Finite Element Program. The parameter estimation model utilized in this study is applied to two underground structures : the one Pusan subway tunnel: and the other Darlington intake tunnel in Canada, and the effectiveness of the proposed model is illustrated.

• Korean Journal of Remote Sensing
• /
• v.20 no.2
• /
• pp.103-116
• /
• 2004

The mesoscale atmospheric models to produce surface temperature can not generally consider the effect of the sloped terrain for direct solar radiation. These have not showed the regional difference of solar radiation and as a result, have made the big error in the local surface temperature. Therefore, we wished to represent the exact locality of surface temperature by considering the geometric properties of surface as well as the vegetated properties of surface. The purpose of the study is to produce local surface ground temperature in sloped terrain diagnostically using surface Energy Balance Model (EBM) with the use of GRID model in Geographic Information Systems (GIS). In this study, surface inhomogeneity over southeastern part of Korean peninsula are considered in estimation of the absorbed surface solar radiation in terms of the illumination angle, depending on topographical aspect and slope in GRID. Also, the properties of vegetated surface which the major components for the variability of surface temperature are considered in terms of NDVI. The results of our study show the locally changes in the surface ground temperature due to local ground aspect and slope effect and local properties of vegetated surface. The more detailed distribution of local surface temperature may drive the local circulation at lower atmospheric and it may explain better the real local circulation.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.85-94
• /
• 1997

The design and construction of underground structures contain many substantial mincer dainties. A reasonable estimation of geotechnical parameters is of paramount importance and must be one of the most difficult tasks in designing and constructing underground structures. If the plastic zone exists by tunnel excavation, the ground response may also be dependent on the yield criterion mainly composed of strength parameters. In order to estimate unknown model parameters from the in-situ measurements as well as prior estimates for designing tunnels which have plastic zones, the Extended Bayesian Method(EBM) is adopted : an elasto-plastic finite element program is linked to the EBM as a mathematical model to predict the ground response. Mohr-Coulomb failure criterion is used to represent the plastic behavior. A hypothetical underground site, where the ground behaves elasto-plastically, is adopted to demonstrate the validity of the proposed feedback system.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.430-440
• /
• 2000

To support Integrated Services in the Internet, the Internet Engineering Task Force(IETF) has developed new mechanisms. These new mechanisms include Resource Reservation Protocol(RSVP) and Integrated Services model. RSVP and Integrated Services are independent of the underlying link layer technologies and it is necessary to define the mapping of RSVP and Integrated Services specifications onto specific link layer technologies. IETF proposed a Subnet Bandwidth Manager(SBM) providing a method for mapping RSVP onto IEEE802 style networks. However, the SBM has several constraints and problems. For solving these constraints and problems, we design and implement a new Ethernet Bandwidth Manager(EBM). This paper discusses (1) new bandwidth management mechanism independent of RSVP, (2) simulation of Ethernet bandwidth to analyze the characteristics of Ethernet and accomplish Ethernet bandwidth management, (3) design and implemetation of EBM that allows Controlled-Load Service, and (4) results of our experiments on EBM.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.25-25
• /
• 2018

Electron beam melting (EBM) is one of powder based additive manufacturing technology used to produce parts for high geometrical complexity and directly with three-dimensional computer aided design (CAD) model. It is kind of the most promising methods with additive manufacturing for a wide range of medical applications, such as orthopedic, dental implant, and etc. This research has been investigated the microstructure and mechanical properties of as fabricated and hot iso-static pressing (HIP) processed specimens, which are made by an Arcam A1 EBM system. The Ti-6Al-4V titanium alloy powder was used as a material for the 3 dimensional printing specimens. Mechanical properties were conducted with EBM manufacturing and computer numerical control (CNC) machining specimens, respectively. Surface morphological analysis was conducted by scanning electron microscopy (SEM) for their surface, dissected plan, and fractured surface after tensile test. The mechanical properties were included tensile stress-strain and nano-indentation test as a analysis level between nano and macro. As following highlighted results, the stress-strain curves on elastic region were almost similar between as fabricated and HIP processed while the ductile (plastic deformed region) properties were higher with HIP than that of as fabricated processed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.20 no.1
• /
• pp.31-45
• /
• 2024

The purpose of this study is to explain employment factors in the software field. For it, the Graduates Occupational Mobility Survey by the Korea employment information service is used. This paper proposes employment models in the software field using machine learning. Then, it explains employment factors of the models using explainable artificial intelligence. The models focus on both university graduates and vocational college graduates. Our works explain and interpret both black box model and glass box model. The SHAP and EBM explanation are used to interpret black box model and glass box model, respectively. The results describes that positive employment impact factors are major, vocational education and training, employment preparation setting semester, and intern experience in the employment models. This study provides a job preparation guide to universitiy and vocational college students that want to work in software field.