• Journal of Nutrition and Health
• /
• v.51 no.1
• /
• pp.60-72
• /
• 2018

Purpose: The purpose of this study was to determine differences in eating-out, dietary life styles, and healthy dietary competencies among middle-aged consumers according to obesity status and gender for implications of consumer education. Methods: Data were drawn from the 2016 Food Consumption Behavior Survey, and 3,022 subjects (mail 1,388; female 1,634) who were middle-aged adults were investigated. Analysis of variance with $Scheff\acute{e}$ test, t-test, $x^2$-test, and factor analysis were performed using SPSS v.24. Results: Males showed less interest in diet than females. For both males and females, higher BMI degrees were associated with higher levels of interest in diet. For frequency, monthly average consumption expenditure, one-time cost for eating out, and drinking frequency, males showed higher levels than females. Especially for the male group, higher obesity status was associated with higher levels of eating out and drinking. Dietary lifestyles of males and females turned out to be very similar. For the male group, normal weight group was more likely to show 'health and high quality pursuit dietary life-style' than the other groups. For females, the normal weight group were more likely to show 'health and high quality pursuit dietary life-style' and 'safety pursuit dietary life-style' than the other groups. The level of 'healthy dietary competence' for females was found to be higher than that for males. For the female group, there were significant differences according to obesity status, and practice was more important than knowledge in determining a healthy dietary life. Conclusion: For dietary life-related education for obese middle-aged consumers, it is important to emphasize less eating-out and drinking and less overeating while eating-out based on the results that eating-out, drinking, and overeating in the obesity group were significantly higher than in the normal group. It is important to focus on the value of dietary life and diverse foods, based on the results that the obesity group was less likely to be have healthy dietary lifestyles and consume less diverse foods than the normal group.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.962-973
• /
• 2017

Concerns about an air pollution are gradually increasing at home and abroad. The automotive and fuel researchers are trying to reduce emissions and greenhouse gases of vehicles through a research on new engine designs and innovative after-treatment systems using clean fuels (eco-alternative fuel) and fuel quality improvements. In this paper, we stduy the emission characteristics of greenhouse gases on seven vehicles using gasoline, diesel, and LPG by legal test mode in domestic and abroad.(Urban mode, Highway mode, rapidly acceleration and deceleration, using air conditioner, low temperature condition) Regardless of fuels, most of the greenhouse gases tend to show the worst results in cold FTP-75 mode. In the case of A vehicles (2.0 MPI) and B vehicles (2.4 GDI) using a gasoline fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. But G vehicles(LPLi) have different emission characteristics from another vehicles. In the case of A vehicles (2.0 w/o DPF) and B vehicles (2.2 with DPF) using a diesel fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. However, the factor of F vehicles are in order of low temperature condition, using air conditioner, rapidly acceleration and deceleration. In conclusion, it will be an effective method to apply different technologies of emission reduction for each fuel.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.38-45
• /
• 1995

The objective of this study was to investigate the effect of temperature on the formation of CaCO, polymorphs(i.e.,calcite, aragonite, vaterite) and on the crystal shape of CaCO,.The reaction systems were rnvestigated at the temperature range of 2.0%-85.3r, at the fixed cmditions ofconcentration and pressure, 2X10-' M, atomospheric pressure, respectively.The reaction systems studied include a Ca(HCO.,),-Air bubble, O Ca(OH)s-CO,, @ Ca(OH),-H,CO, ,Ca(OH1,-Na>CO,, O Ca(OH),-K,CO,, @ Ca(OH),-(NH,),CO,, D CaC1,-Na,CO,, CaC1,-K3C03, 8 CaC1,-(NH,,),CO,, 0 Ca(N0,X-Na,CO,, 03 Ca(N0,X-QCO,. 0 Ca(NO,),-(NH,XCO,. The results obtained are summarizedas follows:Calcite is formed at the temperature range of 2t-80"C and the highest calcite yield was obtained at 30%.Aragonite begins to be formed at the temperature range of 41.0%-53.0%. and the higher temperature is thehigher yield is obtained. pH of the reaction system affect the yield of aragonite, and the yield reaches the highestpercentage at the pH range of 10.0-11.0, and at the conditions of pH 12.3 or over, aragonite is scarcely formed.Vaterlle is fnrmed at the temperature range of 40.0% or less, and transites utterly to calcite within 10-60mmutes in the case of bemg residenced in mother liqmd which C1 is not contained, and within 140hours inthe case of containing CI-.s in the case of containing CI-.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.945-954
• /
• 2006

The purpose of this study is to present basic data for an improvement of school foodservice by indentifying students' preference level for school meal menu and assessing students' nutrition intake. The subjects participated in this study were 544 high school students on 1st grade served by self-operated school foodservice in Daegu. The frequency analysis, t-test analysis, and correlation analysis were carried out for the data analysis using SPSS 12.0 program. Based on the results toward students' preference and serving frequency, the most frequently offered food was soup sorts and then followed by the categories of boiled rice, kimchi, broiled food and hard-boiled food. Boiled rice, rice with assorted vegetables, mandu soup, salad and braised beef rib were highly preferred to the students. Male students scored higher preference to the menu related with meats than female students. However, the students' preference and serving frequency on the menu were not correlated significantly in this study. A substantial correlation was found between the degree of preference and the rate of intake (p<0.01). It would be generalized that preferences to menu items strongly sffected the level of intake by students. The nutrient analysis of food intake revealed that both male and female students were not consuming sufficient level of calorie, calcium and vitamin $B_2$. In conclusion, the results indicate that the students' preference is a very important variable influencing the consumption level of meal as well as balanced nutrient intake by students served in school foodservice. Menu planning should be integrated into school foodservice management for quality control. As limited control of the menu may also negatively influence on the food leftovers and ecological issues, professionals related to the school foodservice including administers, educators and dieticians need to check up the students' preference regularly and reflect their perception on the menu planning to improve the quality of school foodservice. The nutrient intake currently provided through school foodservice should be also assessed more thoroughly. These data could be incorporated into continuous quality improvement and strategic planning in school foodservice.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.179-190
• /
• 2012

This study was performed to obtain a heat saving effect and enhance the efficiency of a greenhouse by using a hot water piping in order to minimize the operating costs of a greenhouse as oil prices continue to rise. This method also reduces the likelihood of accidents caused by snowdrifts in regions with heavy snowfall. In general, the experimental plot was $2.0{\sim}6.0^{\circ}C$ higher than the control plot. When the skylight felt was opened, the minimum temperature was in the range of $3.0{\sim}12.0^{\circ}C$. Therefore, we judged that damage caused by snowdrifts may be prevented partly by active heating. The temperature difference inside of the greenhouse by height was insignificant. The maximum heating load of the greenhouse according to crop was respectively about $37,000kcal{\cdot}h^{-1}$ and $41,700kcal{\cdot}h^{-1}$. During the experiment, the heat value of each designed temperature in the range of the minimum ambient temperature $-11.9{\sim}4.0^{\circ}C$ was about 95,000~322,000 kcal and it was in the range of $6,050{\sim}20,900kcal{\cdot}h^{-1}$. If it is compared with the maximum heating load, it can be shown that about 15~56% of the heating energy can be supplied. The total heat value and the amount of power consumption were 2,629,025 kcal and 677.3 kWh respectively during the experiment. If it is heated with diesel, a fossil fuel, the consumption during the experiment was 291 L and the cost was 331,700won. Total cost of using electric power was about 24,400 won and it is shown that it is about 7.5% of the cost of diesel consumption. Also, if the total amount of power consumption is converted into energy, it is approximately 582,200 kcal and the energy was just about 22% of the total heat value.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.169-193
• /
• 2016

In order to characterize the Neotectonic crustal deformation and current stress field in and around the Korean Peninsula and to interpret their tectonic implications, this paper synthetically analyzes the previous Quaternary fault and focal mechanism solution data and recent geotechnical in-situ stress data and examines the characteristics of crustal deformations and tectonic settings in and around East Asia after the Miocene. Most of the Quaternary fault outcrops in SE Korea occur along major inherited fault zones and show a NS-striking top-to-the-west thrust geometry, indicating that the faults were produced by local reactivation of appropriately oriented preexisting weaknesses under EW-trending pure compressional stress field. The focal mechanism solutions in and around the Korean Peninsula disclose that strike-slip faulting containing some reverse-slip component and reverse-slip faulting are significantly dominant on land and in sea area, respectively. The P-axes are horizontally clustered in ENE-WSW direction, whereas the T-axes are girdle-distributed in NNW direction. The geotechnical in-situ stress data in South Korea also indicate the ENE-trending maximum horizontal stress. The current crustal deformation in the Korean Peninsula is thus characterized by crustal contraction under regional ENE-WSW or E-W compression stress field. Based on the regional stress trajectories in and around East Asia, the current stress regime is interpreted to have resulted from the cooperation of westward shallow subduction of the Pacific Plate and collision of Indian and Eurasian continents, whereas the Philippine Sea plate have not a decisive effect on the stress-regime in the Korean Peninsula due to its high-angle subduction that resulted in dominant crust extension of the back-arc region. It is also interpreted that the Neotectonic crustal deformation and present-day tectonic setting of East Asia commenced with the change of the Pacific Plate motion during 5~3.2 Ma.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.227-242
• /
• 2000

Site characteristics, vegetation structure and dynamics of Kalopanax septemlobus forests in Mt. Heungjeong, Mt. Balwang and Mt. Gariwang were studied to provide the information need for national resources conservation and restoration of K. septemlobus forest in Gangwon-do of Korea. The K. septemlobus forests were distributed at 780m to 1,300m in altitude, steep slope, ridges-slope areas with facing northeast to northwest in good nutrition area. The annual diameter growth of those trees ranged 1.60mm to 2.41mm. Forty-three plots(20$\times$20m) were set up at three natural population of Kalopanax septemlobus forest and TWINSPAN method was used for vegetation structure analysis. The result of TWINSPAN ordination show that geographical features played a role in determining community types in the study areas. Community type of the study areas classified into three groups by TWINSPAN; K. septemlobus-Quercux mongolica- Acer mono community(Mt. Balwang), K. septemlobus-Q. mongolica- Tilia amurensis community(Mt. Heungjeong), K. septemlobus-Betula costata-Q. mongolica community(Mt. Gariwang). In most of the K. septemlobus forests, major woody species appeared predominantly were Q. mongolica, T. amurensis, Acer pseudo-sieboldianum, Lindera obtusiloba, A. mono, Magnolia sieboldii, Ulmus davidiana var. japonica. And also, Those species were surveyed in all the areas. Species diversity(H') of investigated areas ranged 0.3124~0.13992 and this value relatively higher than that of other forests with similar site. The range of similarity indices between surveyed areas was 64.1~64.54%. The distribution pattern of Morista's index show that Kalopanax septemlobus distributed randomly in tree and concentrated a few sample plots in subtree layer and shurb layer. K. septemlobus occupied 37.1~58.8% of tree layer story, 8.4~17.6% of subtree layer, 0~0.38% of shurb layer each surveyed area. The association analysis showed that Kalopanax septemlobus positively associated with Betula ermani, Deutzia glabrata, Carpinus cordata, Fraxinus mandshurica and negatively associated with Symplocos chinensis var. pilosa, Styrax obassia, Acer mono, Euonymus macroptera, Ulmus davidiana var. japonica. According to the diameter distribution of Kalopanax septemlobus community, the community of Mt. Gariwang will gradually decline and replaced by Quercus community. The communities of Mt. Heungjeong and Mt. Balwang has its seedlings and saplings, so it may be sustained.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.15-24
• /
• 2021

This study is about the introduction and usefulness evaluation of the manufacturing method of the bolus-helmet. Helmet-production for the treatment of scalp tumor patients has been tried and will continue in many creative and various ways. However, Most of the research data did not significantly reduce the psychological burden and physical and physical discomfort that the patient had to bear due to the time and economic cost required for the production of the helmet, the convenience of production, and the complexity of the process. In addition, recently, studies using more advanced technologies and equipment such as 3D-printer technology, which are being studied as a way to increase the treatment effect, are being introduced, but the time, economic cost, and psychological and physical burden are still the sole responsibility of the patient. Isn't it getting worse? The reality is that the thoughts of concern cannot be erased. Therefore, by maintaining the physical properties of the bolus and manufacturing a helmet without incurring additional costs, the physical and physical discomfort aggravated to the patient was reduced and the procedure and time for helmet manufacturing were minimized. In this way, it was possible to reduce the time, economic cost, and physical discomfort required for the production of the helmet, and it was also possible to minimize the psychological burden of the patient, although it is invisible. Additionally, in evaluating the usefulness of helmets, we are able to continuously seek and develop ways to reduce the air-gap interval, and as a result, we will be able to introduce a method to keep it within 2.0mm along with the manufacturing method through this study. I feel very welcome. Finally, I hope that anyone working in the Department of Radiation Oncology will be able to easily manufacture the helmet required for radiation therapy using a bolus through the guide-line on helmet manufacturing provided by this institute. I hope and hope that if you have any questions or inquiries that arise during the production process, please feel free to contact us through the researcher's e-mail or mobile phone at any time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.76-83
• /
• 1984

This experiment was performed to investigate the flowering habit of sesame (Sesamum indicum L.). Sesame varieties tested could be classified into 8 different plant types by their morphological traits such as capsule shape, capsule setting habit and branching types among sesame gene pool of Crop Experiment Station, ORD. The first flower was appeared at the lowest node on main stem. Flowers were appeared progressively toward the tip of the main stem and also toward the tips of branches. The interval of flowering for a node was about one day, but 3 to 8 days for the flowers on the tips. Side flowers started at 4 to 5 nodes lower than those of center flower at the same day. Flowers were beared 2 by 1 node on the middle part of flower setting node (7-9) in mono capsule setting habit in spite of its normal is 1 by 1 node on the other nodes. Flowers were beared opposite direction on each node of stem and flowering toward the tip of main stem composed of cross shape between nodes and spiral, reverse of clockwise direction. We called this habit as cross spiral flowering order and cross spiral phyllotaxis. The first flower on branches was appeared when center flower on the 5th node of main stem began to flower. The branches produced at higher nodes on main stem showed larger flowering periods and more number of flowers than that at lower parts. BTB (Branch, Tricapsule, Bicarpels, 4 Loculi) type showed three capsule setting habits and same flowering period both on main stem and branches while BTQ (Branch, Tricapsule, Quadricarpels, 8 Loculi) type showed three capsule setting habit on main stem and mono-capsule setting habit on branches. In BTQ type, the period of flowering was much shorter on branches than on main stem. Branching type was considered more promising than non branching type for the breeding of early maturing high yielding variety because branching type has the advantage of bearing a lot of flowers in comparatively short flowering period.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.71-77
• /
• 2001

This experiment was designed to improve the production efficiency of germ-line chimeric mice from phospholipase C (PLC)-$\beta$3 or peroxiredoxin (Prx) E -targeted ($\Delta$) ES cells by the investigating the manipulation conditions and characteristics of Jl ES cells. Four targeting clones were isolated to investigate the karyotypical and morphological stability prior to injection. All clones ($\Delta$PLC$\beta$-3 C3, $\Delta$Prx II C3, C10 and I5) showed more than 80% euploidism, however, most of $\Delta$PLC$\beta$-3 C3 clones were extensively differentiated compared to the other clones. Nine of 13 $\Delta$Prx II chimeras appeared to have at least 80% chimerism, whereas $\Delta$PLC$\beta$-3 C3 chimeras had 20% chimerism at most. Therefore, the morphological stability of ES cells under stable euploidism might mainly affect the production rate of high-coat chimeric mice. To increase the collection rate of injectable blastocysts (IBs), 5 to 10 week -aged C57BL/6J female mice were sacrificed at 3.5 days post-coitum. Ten week-aged mice were the most optimal IB donors by showing the highest collection rate (2.94/mouse) of injectable blastocysts without increase of non-injectable embryos (0.29/mouse). Foster mothers might be another factor because ICR x C57BL/6J F1 foster mother showed more increased productivity in litter size (2.8 vs. 5.6) and chimera (0 vs. 35.3%) than those of ICR foster mothers. In conclusion, the efficient production of germ-line chimeras mainly depends on the maintenance of ES cell morphology during targeting procedure, and the establishment of manipulation conditions might be a key point to maximize it.