• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.3-9
• /
• 2014

Purpose: Our goals were to evaluate the effect of high dose radioiodine treatment for thyroid cancer by taking in laxatives. Materials and Methods: Twenty patients(M:F=13:7, age $46.3{\pm}8.1\;yrs$) who underwent high dose radioiodine treatment were seperated into Group 1 taking $^{131}I$ 5,500 MBq and Group 2 with the use of laxatives after taking $^{131}I$ 5,500 MBq. The whole body was scanned 16 hours and 40 hours after taking radioactive iodines by using gamma camera, the ROIs were drawn on the gastro-intestinal tract and thigh for calculation of reduction ratio. At particular time during hospitalization, the radioactivity remaining in the body was measured in 1 meter from patient by using survey meter (RadEye-G10, Thermo Fisher Scientific, USA). Schematic presentation of an Origin 8.5.1 software was used for spatial dose rate. Statistical comparison between groups were done using independent samples t-test. P value less than 0.05 was regarded as statistically significant. Results: The reduction ratio in gastro-intestinal 16 hours and 40 hours after taking laxatives is $42.1{\pm}6.3%$ in Group 1 and $72.1{\pm}6.4%$ in Group 2. The spatial dose rate measured when discharging from hospital was $23.8{\pm}6.7{\mu}Sv/h$ in Group 1 and $8.2{\pm}2.4{\mu}Sv/h$ in Group 2. The radioactivity remaining in the body is much decreased at the patient with laxatives(P<0.05). Conclusion: The use in combination with laxatives is helpful for decreasing radioactivity remaining in the body. The radioactive contamination could be decreased at marginal individuals from patients.

• Korean Journal of Environmental Biology
• /
• v.36 no.2
• /
• pp.217-231
• /
• 2018

Planktonic ciliates play an important role in the food web of marine ecosystem as well as a bio-indicator for invasive species from ballast waters or from changing flow of ocean currents due to climate changes. This study was carried out to find some evidences for introduction of such invasive species using ciliate plankton in four major international ports of Korea. We surveyed the seasonal species composition of planktonic ciliate to find out the evidence for the invasive species at Busan, Ulsan, Gwangyang and Incheon ports from February 2007 to November 2008. A total of 45 ciliates species, belonging to 15 genera, were identified during the study period: 33 species occurred at Busan, 31 at Gwangyang, 30 at Ulsan, 18 at Incheon. The abundance of naked ciliates ranged from 566 to $65,151cells\;L^{-1}$ and that of tintinnids 10 to $5,973cells\;L^{-1}$. Based on vector species of ciliates reported from Coos Bay in Oregon, 13 vector species of tinitinnids were identified as follows, Eutintinnus lususundae, E. tubulosus, Favella ehrenbergii, F. taraikaensis, Helicostomella subulata, Stenosemella nivalis, Tintinnopsis ampla, T. beroidea, T. cylindrica, T. directa, T. lohmanni, T. radix, T. rapa. All vector species occurred at Gwangyang port. Most tintinnids were mainly neritic species throughout the survey, while warm water species occurred only in short period at Busan, Ulsan and Gwangyang ports that might be affected seasonally by Tsushima warm current.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.259-273
• /
• 1992

The Seongsan mine is one of the largest dickite deposits in the southwestern part of the Korean Peninsula. The main constithent minerals of the ore are dickite and quartz with accessory alunite, kaolinite and sericite. The geology around the Seongsan mine consists mainly of the late Cretaceous felsic volcanic rocks. In the studied area, these rocks make a synclinal structure with an axis of E-W direction plunging to the east. Most of the felsic volcanic rocks have undergone extensive hydrothermal alteration. The hydrothermally altered rocks can be classified into the following zones: Dickite, Dickite-Quartz, Quartz, Sericite, Albite and Chlorite zones, from the center to the margin of the alteration mass. Such zonal arrangement of altered rocks suggests that the country rocks, most of which are upper part of the rhyolite and welded tuff, were altered by strongly acid hydrothermal solutions. It is reasonable to consider that initial gas and solution containing $H_2S$ and other compounds were oxidized near the surface, and formed hydrothermal sulfuric acid solutions. The mineralogical and chemical changes of the altered rocks were investigated using various methods, and chemical composition of fifty-six samples of the altered rocks were obtained by wet chemical analysis and X.R.F. methods. On the basis of these analyses, it was found that some components such as $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO, MgO, $K_2O$, $Na_2O$ and $TiO_2$ were mobilized considerably from the original rocks. The formation temperature of the deposits was estimated as higher than $200^{\circ}C$ from fluid inclusion study of samples taken from the Quartz zone. On the basis of the chemical composition data on rocks and minerals and estimated temperatures, the hydrothermal solutions responsible for the formation of the Seongsan dickite deposits were estimated to have the composition: $m_{K^+}=0.003$, $m_{Na^+}=0.097$, $m_{SiO_2(aq.)}=0.008$ and pH=5.0, here "m" represents the molality (mole/kg $H_2O$).

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.312-320
• /
• 2005

The purpose of this study was to evaluate the polymerization contraction and the microhardness of compostie resin($Supreme^{(R)}$, Filtek $Flow^{(R)}$, 3M-ESPE, USA) according to irradiation modes of LED curing unit(Elipar $Freelight^{(R)}$, 3M-ESPE, USA). The strain guage method was used for determination of polymerization contraction. Sample were divided by 6 groups according to curing modes and filling method. Group A: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 10seconds curing, Group B: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 15seconds curing, Group C: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 15seconds soft start curing, Group D: $Supreme^{(R)}$ only, 10seconds curing, Group E: $Supreme^{(R)}$ only, 15seconds curing, Group F: $Supreme^{(R)}$ only, 15seconds soft start curing. Preparations of acrylic molds were followed by filling and curing. Strain guage attached to each sample were connected to a strainmeter. Measurements were recorded at each second for the total of 10 minutes including the periods of light application. And microhardness of each group after 24hours from light irradiation were measured. Obtained data were analyzed statistically using Repeated measures ANOVA and Tukey test. The results of the present study are as follows: 1. In flowable resin liner group, soft start curing group was not found decrease of polymerization contraction. But, In Supreme only filling group, the lowest polymeriation contraction was found in soft start curing group. 2. 10 seconds curing group showed statistically significant reduction of polymerization contraction compared with 15 seconds curing group(p<0.05). 3. The microhardness values of each group not revealed significant difference(p>0.05). But, lower surface microhardness was not reached 80% of upper surface microhardness.

• Journal of The Korean Association For Science Education
• /
• v.36 no.4
• /
• pp.539-550
• /
• 2016

The purpose of the study is to conceptualize SSI-PCK by identifying major components and sub-components to promote science teachers' confidence and knowledge on teaching SSIs. To achieve this, I conducted extensive literature reviews on teachers' perceptions on SSI, case studies of teachers addressing SSIs, SSI instructional strategies, etc. as well as PCK. Results indicate that SSI-PCK include six major components: 1) Orientation for Teaching SSI (OTS), 2) Knowledge of Instructional Strategies for Teaching SSI (KIS), 3) Knowledge of Curriculum (KC), 4) Knowledge of Students' SSI Learning (KSL), 5) Knowledge of Assessment in SSI Learning (KAS), and 6) Knowledge of Learning Contexts (KLC). OTS refers to teachers' instructional goals and intentions for teaching SSIs. Teachers often present a) activity-driven, b) knowledge and higher order thinking skills, c) application of science in everyday life, d) nature of science and technology, e) citizenship and f) activism orientations for teaching SSIs. KIS indicates teachers' instructional knowledge required for effectively designing and implementing SSI lessons. It includes a) SSI lesson design, b) utilizing progressive instructional strategies, and c) constructing collaborative classroom cultures. KC refers to teachers' knowledge on a) connection to science curriculum (horizontal/vertical) and b) connection to other subject matters. KSL refers to teachers' knowledge on a) learner experiences in SSI learning, b) difficulties in SSI learning, and c) SSI reasoning patterns. KAS indicates teachers' knowledge on a) dimensions of SSI learning to assess, and b) methods of assessing SSI learning. Finally, KLC refers to teachers' knowledge on the cultures of a) classrooms, b) schools, and c) community and society where they are located when teaching SSIs.

• Korean Journal of Agricultural Science
• /
• v.17 no.1
• /
• pp.9-17
• /
• 1990

Erwinia carotovora subsp. carotovora, Pseudomonas viridiflava and Pseudomonas marginalis pv. marginalis were tested for their pathogenicity to 35 kinds of domestic flowering plants. Among them, the following domestic flowering plants showed clear symptoms. 1. Erwinia carotovora subsp. carotovora : (Needle inoculation). Carnation(Dianthus catgophylius L.), madagascar periwinkle(Vinca rosea L.), flower gentle(Amaranthus tricolor L.), snapdragon(Antirrhinum majus L.), chrysanthemum(Chrysanthemum morifolium Ram.), mexiacan ageratum(Ageratum houstonianum Mill), china aster(Callistephus chinensis), youth and old age(Zinnia elegans Jacq.), common nasturtium(Tropaeorum majus L.), scarlet sage(Salvia splendens F.), dahlia(Dahia hybrida), pot marigold(Calendula officinalis L.), begonia treevine(Cissus dicolor Blume), cosmos(Cosmos bipinnatus Cav.), globe amaranth(Gomphrena globosa L.), black eyed susan(Thumbergia alata Bojer), common gypsophila(Gypsophila elegans Bieb.), ghent gladiolus(Gladiolus gandavensis Van.), indian shot(Canna orchiodes Bailey), iris(Iris nertschinskia Lodd), cyclamen primula(Dodecatheon meadia L.), scarlet kafir lily(Clivia miniata Regel.), flowering cabbage(Brassica oleracea L.). (Spray inoculation). Carnation, madagascar periwinkle, flower gentle, snapdragon, common nasturtium, ghent gladiolus, indian shot, cyclamen primula. 2. Pseudomonas viridiflava : (Needle inoculation). Carnation, madagascar periwinkle, snapdragon, chrysanthemum, cockscomb, mexican ageratum, china aster, common nasturtium, common petunia(Petunia hybrida Vilm), pot marigold, begonia treevine, cosmos, black eyed susan, common gypsophila, ghent gladiolus, indian shot, cyclamen primula, scarlet kafir-lily, flowering cabbage. (Spray inoculation). Common nasturtium, ghent gladiolus, indian shot, cyclamen primula. 3. Pseudomonas marginalis pv. marginalis : (Needle inoculation). Carnation, madagascar periwinkle, flower gentle, snapdragon, cockscomb, mexican ageratum, youth and old age, common nasturitium, common petunia, sweet william(Dianthus barbatus L.), pot marigold, begonia treevine, cosmos, common gypsophila, ghent gladiolus, indian shot, iris, cyclamen primula, scarlet kafir-Lily, flowering cabbage. (Spray inoculation). Common nasturtium, ghent gladiolus, indian shot, cyclamen primula.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.378-382
• /
• 2000

The effects of bisphenol A (BPA), known as one of the endocrine disrupting chemicals (EDCs), on the hatching of fertilized eggs (FE) and the spawning of adult fish in songsari, Oryzias latipes were investigated. In condition of the experimental groups, incubated water temperature was $25.0{\pm}0.5^{\circ}C$ and photoperiod was 16 h (light) : 8 h (dark). fE were exposed to aqueous solutions of BPA at nominal concentration of 50, 100 and $200 {\mu}g/l$. The time required in hatching of FE was long in the BPA $50 and 100 {\mu}g/l$ treatment groups when compared to the controls, and in the BPA $200 {\mu}g/l$ treatment group, FE failed to hatch. And also hatching rate was decreased in the BPA treatment groups in comparison to the controls, Adult fishes were reared to oral administration via a diet of 50, 100 and $200 {\mu}g/g$ body weight BPA concentration for 3 weeks, Number of total eggs spawned in the adult fish were fewer in the BPA 100 and 200 treatment groups than in the controls and BPA 50 treatment group. Frequency of abnormal eggs in the total eggs spawned was 11.8 and $16.2{\%}$ in the control and acetone carrier control lower than 36.8, 46,8 and $74.1{\%}$ in the BPA 50, 100 and 200 treatment groups, respectively. And hatching rate of FE decreased in the BPA treatment groups in comparison to the controls. In these results, inhibition of the hatching of FE and the quantity and quality of spawned eggs in adult fish were observed from BPA treatment groups when compared to the controls.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.31-43
• /
• 2014

This experiment evaluated the interaction effect of extreme heat diet(EHD), inverse lighting, and cool water on the growth performance of broiler chickens under extreme heat stress. There were 4 experimental groups (T1: EHD 1, 10:00-19:00 dark, 19:00-10:00 light, cold water $9^{\circ}C$; T2: EHD 2, 10:00-19:00 dark, 19:00-10:00 light, cold water $9^{\circ}C$; T3: EHD 1, 09:00-18:00 dark, 18:00-09:00 light, cold water $14^{\circ}C$; T4: EHD 2, 09:00-18:00 dark, 18:00-09:00 light, cold water $14^{\circ}C$), each group composed of 25 broilers and the experiment was repeated 3 times. EHD 1 contained soybean oil, molasses, methionine and lysine. EHD 2 contained all nutrients of EHD 1 and vitamin C additionally. As a result, T1 and T2 displayed higher body weight increase and diet intake compared to T3 and T4 (p<0.05). The weights of their liver and gizzard were similar but the weights of the thymus and bursa F were higher for T1 and T2 compared to that of T3 and T4 (p<0.05). It was observed that T1 and T2 displayed higher concentrations of blood triglyceride, total cholesterol, HDL-C and blood sugar compared to that of T3 and T4 but LDL-C level was higher for T3 and T4 compared to that of T1 and T2 (p<0.05). T1 and T2 displayed higher levels of immunity substances such as IgG, IgA and IgM compared to T3 and T4 but the blood level of corticosterone displayed to be lower for T1 and T2 compared to T3 and T4 (p<0.05). The T1 and T2 contained a higher amount of fecal lactobacillus compared to that of T3 and T4 but the T3 and T4 contained a higher amount of fecal E. coli, total aerobic bacteria, coliform bacteria compared to that of T1 and T2 (p<0.05). T1 and T2 displayed higher concentrations of cecal acetic acid, propionic acid and total short chain fatty acids compared to T3 and T4 but T3 and T4 displayed higher concentrations of butyric acid, isobutyric acid, valeric acid and isovaleric acid compared to T1 and T2 (p<0.05). These results have been observed that broiler chickens exposed to extreme heat stress with feeding EHD, inverse lighting and cold water would improve blood lipid, and elevate the production of immunity substance, beneficial microorganisms, and short chain fatty acids. This provision would also reduce the blood sugar consumption rate as energy sources and these effects will improve the growth performance of the broilers exposed to extreme heat.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.373-382
• /
• 1984

Processing conditions of retort pouched fried mackerel fish meat paste and quality stability during storage were investigated. The reasonable amounts of added ingredients to the frozen mackerel meat paste were $10\%$ of corn starch, $1\%$ of soybean protein, $1.5\%$ of sodium chloride, $0.6\%$ of monosodium glutamate, $0.3\%$ of alcoholic extract of red pepper, and $0.1\%$ of sodium erythorbate as an antioxidant and also added water corresponding to $10\%$ of the frozen mackerel meat paste. After grinding the defrosted mackerel fish meat paste with ingredients, the meat paste was molded in bar type and fried in soybean oil at $170-180^{\circ}C$ for 3 minutes. The fried mackerel meat paste was cooled, vacuum-packed in laminated plastic film bag (polyester/polyvinylidene chloride/unoriented polypropylene : $12{\mu}m/15{\mu}/50{\mu}m,\;14{\times}19cm$) and finally sterilized at $120^{\circ}C$ for 20 minutes in a hot water circulating retort. The pH, volatile basic nitrogen, moisture content, water activity, color, thiobarbituric acid value, peroxide value, texture and viable bacterial count of products were examined during 100 days of storage at $25{\pm}3^{\circ}C\;and\;5^{\circ}C$. The results showed that products could be preserved in good condition for 100 days at $25{\pm}3^{\circ}C$. Judging from sensory evaluation, the quality of products was not inferior to that of market products.