• Economic and Environmental Geology
• /
• v.10 no.3
• /
• pp.107-117
• /
• 1977

The Charyong batholith extends northeasterly from the west coast to the west of Wonju in the central parts of Korean Penninsula. The batholith is separated by the metamorphic complex into the northern and the southern granites. and is believed to intrude during the Daebo orogeny of early Jurassic to early Cretaceous age. It constitutes a sort of anticlinorium and the metamorphic complex can be regarded as a huge roof pendant. The modal analysis indicates that the Charyong batholith belongs to a series of adamellite-granodiorte-to-nalite. The oxidation property happened during a magmatic segregation reveals that the batholith shows in general orogenic assimilation trend. The granites of early to middle Jurassic age show orogenic assimilation trend, whereas those of late Jurassic to early Cretaceous age post orogenic noassimilation trend. The fracture system of the whole region is two folds: the fractures having attitute of $N25{\sim}40^{\circ}E$ and $70^{\circ}SE$ are regarded as tension fractures, and those of NS, and 50E to vertical and $N50^{\circ}E$ and $80^{\circ}E$ to vertical as shear fractures. All these facts suggest definitely that the Charyong batholith is the syntectonic intrusives during the Daebo orogeny. The mineral deposits in the area studied are gold-silver deposits in majority which was named by O,J.Kim(1970) as the Chonan metallogenic province. They are sulfides baring quartz veins which were emplaced along the tension and shear fractures originated by the Daebo orogeny.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.1
• /
• pp.118-123
• /
• 2021

This study was conducted to evaluate plant proteins as a replacement for a fishmeal diet in the rearing of coho salmon Oncorhynchus kisutch. Twelve groups of 20 fish averaging 34.0±0.62 g were randomly distributed into 12 rectangular tanks (250 L). Four experimental diets included a control diet containing 60% fishmeal (Control), and three other diets that replaced 20% of fishmeal with soy protein concentrate (SPC), fermented soybean protein concentrate (F-SPC), and enzyme-processed soy protein concentrate (E-SPC). At the end of the feeding trial, fish that were fed Control, SPC and E-SPC diets showed significantly higher weight gain, specific growth rate, feed efficiency, and protein efficiency ratio than those that were fed F-SPC diet. However, there were no significant differences among the fish that were fed Control, SPC, and E-SPC diets. No significant differences were observed in crude protein, crude lipid, and ash of whole body among the fish that were fed all the diets. Therefore, these results indicated that 20% of fishmeal could be replaced by E-SPC or SPC without any adverse effects on the growth performance of coho salmon.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.877-885
• /
• 2013

A seawater pipe of the engine room in the ships is being surrounded with severely corrosive environments caused by fast flowing of the seawater, containing aggressive chloride ion and high conductivity etc.. Therefore, the leakage of the seawater from its pipe have been often occurred due to its local corrosion by aggressive chloride ions. Subsequently, its leakage area is usually welded by AC shielded metal arc welding with various electrodes. In this study, when the sea water pipe is welded with several types of electrodes such as E4301, E4311, E4313 and E4316, a difference of the corrosion resistance on the welding metal zones was investigated using an electrochemical method, observing microstructure, measuring polarization behaviors and hardness. The weld metal zone welded with E4313 electrode exhibited the lowest value of hardness compared to other weld metal zones. In addition, its zone indicated also the best corrosion resistance than those of other weld metal zones. Furthermore, all of the weld metal zones revealed a relatively better corrosion resistance than those of the base metal zones. and also showed higher hardness than the base metal zones.

• Journal of the Korean Vacuum Society
• /
• v.21 no.2
• /
• pp.99-105
• /
• 2012

We fabricated the textured silicon (Si) surface on Si substrates by the electrochemical etching using gold (Au) nanoparticle catalysts. The antireflective property of the fabricated Si nanostructures was improved. The Au nanoparticles of ~20-150 nm were formed by the rapid thermal annealing using thermally evaporated Au films on Si. In the chemical etching, the aqueous solution containing $H_2O_2$ and HF was used. In order to investigate the effect of electrochemical etching on the etching depth and reflectance characteristics, the sample was immersed in the aqueous etching solution for 1 min with and without applied cathodic voltages of -1 V and -2 V. As a result, the solar weighted reflectance, i.e., the averaged reflectance with considering solar spectrum (air mass 1.5), could be efficiently reduced for the electrochemically etched Si by applying the cathodic voltage of -2 V, which is expected to be useful for Si solar cell applications.

• Korean Journal of Materials Research
• /
• v.27 no.4
• /
• pp.216-220
• /
• 2017

The effect of electron beam (EB) irradiation on the electrical properties of Zn-Sn-O (ZTO) thin films fabricated using a sol-gel process was investigated. As the EB dose increased, the saturation mobility of ZTO thin film transistors (TFTs) was found to slightly decrease, and the subthreshold swing and on/off ratio degenerated. X-ray photoelectron spectroscopy analysis of the O 1s core level showed that the relative area of oxygen vacancies ($V_O$) increased from 10.35 to 12.56 % as the EB dose increased from 0 to $7.5{\times}10^{16}electrons/cm^2$. Also, spectroscopic ellipsometry analysis showed that the optical band gap varied from 3.53 to 3.96 eV with increasing EB dose. From the results of the electrical property and XPS analyses of the ZTO TFTs, it was found that the electrical characteristic of the ZTO thin films changed from semiconductor to conductor with increasing EB dose. It is thought that the electrical property change is due to the formation of defect sites like oxygen vacancies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1303-1306
• /
• 2005

The mechanical properties of bellows, such as the extensibility and the strength can be changed depending on the shape. For the shipbuilding material, it is favorable that the fatigue life is long due to the elastic property and the reduction of thermal stress in piping system. Nowadays, the domestic production and design of bellows are based on the E.J.M.A Code. Therefore, the design standard is in need because of much errors and lack of detailed analysis. In this study, it is attempted to find out the optimal shape of U-type bellows using the finite element method. The effective factors, mountain height, length, thickness, and number of mountains and the length of joint are considered and the proper values are chosen for the simulation. The results shows that if the number of mountains are reduced, the volume decreases while the stress increases. However, the number of mountains are increased, the volume increases above the standard volume and the stress obviously increases. In addition, the effect of the thickness of bellows on the stress is very large. Both of the volume and stress are decreasing at a certain lower value region.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.3
• /
• pp.977-986
• /
• 2015

Let G be a graph on the vertex set $V(G)=\{x_1,{\cdots},x_n\}$ with the edge set E(G), and let $R=K[x_1,{\cdots},x_n]$ be the polynomial ring over a field K. Two monomial ideals are associated to G, the edge ideal I(G) generated by all monomials $x_i,x_j$ with $\{x_i,x_j\}{\in}E(G)$, and the vertex cover ideal $I_G$ generated by monomials ${\prod}_{x_i{\in}C}{^{x_i}}$ for all minimal vertex covers C of G. A minimal vertex cover of G is a subset $C{\subset}V(G)$ such that each edge has at least one vertex in C and no proper subset of C has the same property. Indeed, the vertex cover ideal of G is the Alexander dual of the edge ideal of G. In this paper, for an unmixed bipartite graph G we consider the lattice of vertex covers $L_G$ and we explicitly describe the minimal free resolution of the ideal associated to $L_G$ which is exactly the vertex cover ideal of G. Then we compute depth, projective dimension, regularity and extremal Betti numbers of R/I(G) in terms of the associated lattice.

• International Journal of Concrete Structures and Materials
• /
• v.19 no.1E
• /
• pp.41-48
• /
• 2007

Addition of latex to concrete is known to increase its durability and permeability. The purpose of this study is to analyze air void systems in latex-modified concretes using a reasonable and objective method of image analysis with such experimental variables as water-cement (w/c) ratios, latex contents (0%, 15%) and cement types (ordinary portland cement (OPC), high-early strength (HES) cement and very-early strength (VES) cement). The results are analyzed by spacing factor, air volume (content) after hardening, air void distribution and structure. Additionally, air void systems and permeability of latex-modified concrete (LMC) are compared by a correlation analysis. The results are as follows. The LMC of the same w/c ratio showed better air entraining (AE) effect than OPC with AE water reducer. The VES-LMC showed that the quantity of entrained air below $100{\mu}m$ increased more than four times. For the case of HES-LMC, microscopic entrained air between the range of 50 to $500{\mu}m$ increased greater than 7 times even in the absence of anti-foamer. Although spacing factor was measured rather low, the permeability of latex-modified concrete was good. It is construed that air void system does not have a considerable effect on the property of latex-modified concrete, but latex film (membrane) has a definite influence on the durability of LMC.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.49-50
• /
• 2010

The near-infrared absorbing donor-acceptor chromophores have been investigated by varying the electron donating and accepting molecular moiety. A series of near-infrared absorbing chromophores were offered narrow and intense absorption band in a various organic solvents. The dyes synthesised were, however, strongly bathochromic shift which extended well into the near-infrared region. The functional uses of dyes are vast in number, and it is convenient to classify them in some way. In all cases, it is the $\Pi$-chromophore that plays a major role in the functional application. "Light absorption" is of course the most commonly used property of a dye chromophore, and it can be employed directly, e.g. in light filters and optical data recording, or it can be used to drive further functional processes, e.g. fluorescence, photochromism, photosensitization.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2004.11a
• /
• pp.100-105
• /
• 2004

The difference of whiteness, brightness and lightness was clearly explained in this paper through the use of a tinting dye and a fluorescent whitening agent which are commercially wide]y used to make paper look whiter. Other optical properties such as tint, color shade, and color difference were also discussed. It was suggested that in comparing two tinting dyes, lightness $(L^*)$ is the most important property to be compared, while whiteness data should be used in caution in order not to surpass its significant range, and $a^*,\;b^*$ values can also be used to see the change of color shades together with ${\Delta}E$ as color difference. In comparing two fluorescent whitening agents, whiteness or brightness values are most important to be compared, but lightness values are not suitable fur this purpose; $a^*,\;b^*$ and color difference ${\Delta}E$ can also be referred, but with less significance.