• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.71-81
• /
• 1989

This study was aimed for bettering productivity and technical level of the dental 1 aboratory, and helping the dental technician's benefits and rights, and then endowing them some belonged atmospher and stability on their post by Improving job- satisfaction and maintaining the transferability of one's post at a proper limitation. Therefore, 320 dental technicians extracted randomly from all the technicians working at 494 dental laboratories were subjected for this study. The approach to the study was a way through some postal questionaires executed from March 29, 1988 until May 4, the same year, in which total 254 technicians answered, showing 79% resp"nserate. responserate. The data-analysis was done by a model of the dental technician's transferability from their post, as considering Mobley's(1978)-model of post-transferability, and results through the study are as follows : 1. Satisfaction at a given post showed that the married is better than the unmarried(<0.05), and the experienced is better than the inexperienced(P<0.01). 2. Age, sex, educational experience, and one's service-duration did not affect significantly to the respondent's satisfaction on their post, statistically. 3. Satisfaction at a given post differed in adccordance with given conditions of one's post, i. e.,it stowed high when the monthly payment was good(P<0.05), and when too much duty on their job was given, it was the worst as shown in an example of the next order, too much

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.366-372
• /
• 2005

This paper presents analysis of a slot array antenna having a low side lobe level and high front-to-back ratio for a repeater system of a satellite DMB(Digital Multimedia Broadcasting) service. Antennas for this repeater system require a high gain and enough isolation to reduce interferences between signals in system. Therefore, it is necessary to suppress a side lobe level and to increase front-to-back ratio. Unlike a structure 134 by lossy microstrip lines, in this work a single cavity-backed slot antenna array using a single waveguide feed is proposed to obtain the reliability for high power handling and high radiation efficiency. The side lobe level and front-to-back ratio are enhanced with tapered array technique and an optimized vertical reflector. The measured side lobe levels in H- and E-plane are under $-33.24\;\cal{dB}$ and $-35.78\;\cal{dB}$, respectively. The front-to-back ratio over $37.84\;\cal{dB}$, and the peak gain of over $17\;\cal{dBi}$ are measured.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.1
• /
• pp.45-63
• /
• 2004

The main purpose of this article is to suggest policy implications for building innovative cluster in Korea by investigating the operating system and role of the Kanagawa Science Park (KSP) located in Kanagawa prefecture, Japan as a central network agent. The KSP established mainly by private and government partnership has played a critical role for building innovative clusters as a way in which increase national competitiveness. But they also provide variety of real service from R&D to commercialization for local firms by facilitating and coordinating networks among regional economic actors such as firms, universities and public research institutes. The regional policy as a way in which increase national competitiveness in Korea is also the establishment of innovative clusters based on regional and industrial characteristics. However, the main problem with building the innovative cluster is the reduction of policy effectiveness due to duplicated supporting and coordinating institutes and institutions established by the each central administration and local governments, aimed at facilitating networks among regional economic actors. In this context, the article suggests that there is a need to build a regional central network agent by designing an organic operating system for the effective management of each network agent in accordance with the process from R&D to commercialization, i.e. an encompassed supporting system, on the basis of benchmarking the KSP operating system in Japan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.175-180
• /
• 2016

Waste bumpers from out-of-service vehicles are recycled in the manufacturing process of plastic parts by incorporating pristine materials after removing the coated paint on a bumper. This study examined the chemical properties and mechanical properties of a mixture of recycled bumper and pristine materials as a function of the mixing ratio. When the pristine materials and the recycled bumper pieces were mixed, the stiffness (tensile strength and the flexural modulus) was provided by their composition averages. On the other hand, the toughness (Izod impact strength and the elongation-at-break) was lower than their composition averages (i.e., negative deviation). FTIR analysis showed that these results were due to the absence of the compatibility between the pristine materials and recycled bumper pieces. When the recycled bumper pieces were loaded at more than 30 wt. %, the toughness decreased drastically. A previous study showed that a paint removal efficiency up to 80 wt.% was easily attainable. The other 20 wt.% of paint on the bumper is very difficult to remove. Therefore, this study examined the mechanical properties of a mixture of recycled bumper pieces containing the unremoved paint and recycled bumper pieces without paint. When the recycled bumper pieces containing the unremoved paint were incorporated in only small quantities, the mechanical properties were decreased to a great extent. These results show that the paint removal efficiency is very important in the recycled bumper industry.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.383-390
• /
• 2006

Product-line engineering is a dreaming goal in software engineering research. Unfortunately, the current underlying technologies do not seem to be still not much matured enough to make it viable in the industry. Based on our experiences in working on mobile telephony systems over 3 years, now we are in the course of developing an approach to product-line engineering for mobile telephony system software. In this paper, the experiences are shared together with our research motivation and idea. Consequently, we propose an approach to building and maintaining telephony application logics from the perspective of scenes. As a Domain-Specific Language(DSL), Menu Navigation Viewpoint(MNV) DSL is designed to deal with the problem domain of telephony applications. The functional requirements on how a set of telephony application logics are configured can be so various depending on manufacturer, product concept, service carrier, and so on. However, there is a commonality that all of the currently used telephony application logics can be generally described from the point of user's view, with a set of functional features that can be combinatorially synthesized from typical telephony services(i.e. voice/video telephony, CBS/SMS/MMS, address book, data connection, camera/multimedia, web browsing, etc.), and their possible connectivity. MNV DSL description acts as a backbone software architecture based on which the other types of telephony application logics are placed and aligned to work together globally.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.1-14
• /
• 2014

Both researchers and practitioners are showing an increased interested in interactive exhibition services. Interactive exhibition services are designed to directly respond to visitor responses in real time, so as to fully engage visitors' interest and enhance their satisfaction. In order to install an effective interactive exhibition service, it is essential to adopt intelligent technologies that enable accurate estimation of a visitor's emotional state from responses to exhibited stimulus. Studies undertaken so far have attempted to estimate the human emotional state, most of them doing so by gauging either facial expressions or audio responses. However, the most recent research suggests that, a multimodal approach that uses people's multiple responses simultaneously may lead to better estimation. Given this context, we propose a new multimodal emotional state estimation model that uses various responses including facial expressions, gestures, and movements measured by the Microsoft Kinect Sensor. In order to effectively handle a large amount of sensory data, we propose to use stratified sampling-based MRA (multiple regression analysis) as our estimation method. To validate the usefulness of the proposed model, we collected 602,599 responses and emotional state data with 274 variables from 15 people. When we applied our model to the data set, we found that our model estimated the levels of valence and arousal in the 10~15% error range. Since our proposed model is simple and stable, we expect that it will be applied not only in intelligent exhibition services, but also in other areas such as e-learning and personalized advertising.

• Journal of Educational Research in Mathematics
• /
• v.19 no.4
• /
• pp.545-564
• /
• 2009

TPACK (Technological Pedagogical Content Knowledge) adds the technological knowledge to PCK (Shulman 1986), completing the combination of three kinds of knowledge, i.e. teacher's content knowledge (CK), pedagogical knowledge (PK), and technological knowledge (TK). In this study, I seek to design methodological ways to improve TPACK for preservice mathematics teachers by developing and analyzing team project-based classes with technology in a class of the first semester 2009 in a teacher's college in Seoul, South Korea. The goal of the team project is to design classes to teach mathematics with technology by selecting technology tools suitable for specific mathematical concepts or mathematics sections. In the early stage of the class in the college, the confidence levels among the preservice mathematics teachers were relatively low but increased in the final stage their mathematics teaching efficacy up to from 3.88 to 4.50. Also, the pre service mathematics teachers answered the team project was helpful or very helpful in developing TPACK; this result proves that lectures with technology which based on team project are excellent tools for the teacher to design classes with technology confidently. Considering the teacher's TPACK is one of the abilities to achieve the goals required in the information technology era, the preservice mathematics teachers are asked to plan and develop the lectures with technology, rather than just taught to know how to use technology tools or adapt to specific cases. Finally, we see that national-wide discussion and research are necessary to prepare customized standards and implementable plans for TPACK in South Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.169-177
• /
• 2020

In South Korea, the results of R&D in science and technology are submitted to the National Science and Technology Information Service (NTIS) in reports that have Korea national science and technology standard classification codes (K-NSCC). However, considering there are more than 2000 sub-categories, it is non-trivial to choose correct classification codes without a clear understanding of the K-NSCC. In addition, there are few cases of automatic document classification research based on the K-NSCC, and there are no training data in the public domain. To the best of our knowledge, this study is the first attempt to build a highly performing K-NSCC classification system based on NTIS report meta-information from the last five years (2013-2017). To this end, about 210 mid-level categories were selected, and we conducted preprocessing considering the characteristics of research report metadata. More specifically, we propose a convolutional neural network (CNN) technique using only task names and keywords, which are the most influential fields. The proposed model is compared with several machine learning methods (e.g., the linear support vector classifier, CNN, gated recurrent unit, etc.) that show good performance in text classification, and that have a performance advantage of 1% to 7% based on a top-three F1 score.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.211-217
• /
• 2008

Recently, there are many efforts to support seamless mobility in 802.11 WLANs using IP Layer mobility protocols. The IP layer mobility protocols are the most efficient mechanism to guarantee the service session continuity when IP subnet is changed during handover. Even if the IP layer mobility protocols are quite efficient, the feature of the protocols that had been designed to consider only L3 layer makes it difficult to improve the performance of hand over more and more. Nowadays, to overcome this limitation of IP mobility protocols, many researchers have worked on the mobility protocols integration of different layers (e.g., L2 layer). In this paper, we propose the enhanced Proxy MIPv4 to minimize the latency of handover using MIH protocol in 802.11 WLANs. The proposed mechanism minimizes the latency of authentication by exchanging security keys between Access Routers during handover. Moreover, it also minimizes packet losses by Inter-AP Tunneling and data forwarding.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.9-14
• /
• 2010

Nautical Publications is a special purpose book, or a specially compiled database, that is issued officially by or on the authority of a Government, authorized Hydrographic Office and is designed to meet the requirements of marine navigation such as SOLAS and PSC. Nautical publications include List of Lights, Sailing directions. The SNPWG(Standardization Nautical Publications Working Group) from the IHO is working to implement in computer systems all those elements of interest for Hydrography and Navigation Concerning nautical publications' digitization process, the SNPWG has defined three types of nautical publications: Type 1 : Hard copy(NP1), Type 2 : Digital version, A slight modification of type 1(NP2), Type 3 : Digital version for ECDIS(NP3). Nautical Publications is essential with nautical charts as reference information to navigate. Development of digital nautical publications is needed for liaison with the chart production system, up-to-dateness of hydrographic information, improvement of service. But, Korean status is positioned in NP1. In our study, we surveyed the present status of nautical publications for development strategy of digital nautical publications. We build database of south coast of sailing direction, develop a manager program, convert the contents to KML( Keyhole Markup Language), develop a user program.