• Rapid Communication in Photoscience
• /
• v.4 no.4
• /
• pp.86-87
• /
• 2015

Substituted butadiyne cobalt complexes 1, 2 were prepared and placed on the e-beam to study the fragmentation focused on diyne generation, in MS spectrometer. Phenyl or methyl substituted cobalt complexes generated the corresponding diyne with 100, 30% relative intensities under e-beam irradiation in gas phase.

• Journal of Electrochemical Science and Technology
• /
• v.6 no.3
• /
• pp.75-80
• /
• 2015

We introduce a new synthesis method to prepare small TiO₂ nanoparticles with a narrow particle size distribution, which is achieved by electron beam (E-beam) irradiation. The effects of E-beam irradiation on the synthesis of TiO₂ nanoparticles and the electrochemical performance of TiO₂ nanoparticles as alternative anode materials for Li-ion batteries are investigated. The TiO₂ nanoparticles induced by E-beam irradiation present better cycling performance and rate capability than the TiO₂ nanoparticles synthesized by normal hydrolysis reaction. The better electrochemical performance is attributed to small particle size and narrow particle size distribution, resulting in the large surface area that provides innumerable reaction sites and short diffusion length for Li⁺ through TiO₂ nanoparticles.

• Preventive Nutrition and Food Science
• /
• v.11 no.1
• /
• pp.73-77
• /
• 2006

Ground pork was irradiated with an electron beam (e-beam) at a dose of 0, 1.5, 3, 5 and 10 kGy and the changes in various functional and other associated properties of salt-soluble proteins extracted from the pork were evaluated. Irradiation did not affect turbidity and the disulfide content of pork salt-soluble protein, but the content of sulfhydryls and the hydrophobocity of salt-soluble protein increased. This indicates that protein degradation occurred when the pork was e-beam irradiated and that the sulfhydryls and hydrophobic moieties buried inside the proteins were exposed to the outside environment. However, these degraded protein molecules did not form large protein aggregates through disulfide bridges. The emulsifying capacity of the pork increased with irradiation, which could be the result from increased hydrophobicity of pork salt-soluble protein. Water holding capacity of pork was not affected bye-beam irradiation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.377-378
• /
• 2008

Space charge formation in various glass materials under electron beam irradiation was investigated. Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples. Furthermore, the dependence of the polarity of accumulated charges on the component of glass materials is discussed by using the models of energy bands.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.5-11
• /
• 2012

The abjective of this study was to study the degradation behavior and acute toxicity assessment of Triclosan and acute toxicity under E-beam irradiation. The experiments were conducted to investigate the efficts of the degradation efficiency in the initial concentration of Triclosan and the irradiation capacity of E-beam and the degree of mineralization based on a change of scavenger gas. The biological toxicity test by using on green algae, Pseudokirchneriella Subcapitata was conducted to lead the reducing toxicity. Degradation efficiency of Triclosan was improved when E-beam irradiation intensity was higher. Additionally, the % of TOC removal in each Radical scavenger gas was increased as the follows orders: $N_2O$ > $O_2$ > $N_2$, The toxicity test showed that the toxicity effect after 4 days(96hrs) was decreased by increase of E-beam irradiation intensity.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.45-51
• /
• 2016

The present study uses an electron beam (e-beam) to modify the wetting characteristics of thermoplastic polymer surfaces. A high energy e-beam irradiated various polymer surfaces (PET, PMMA, and PC), with variations in irradiation time and applied current. The water contact angles were measured on the e-beam irradiated surfaces in order to investigate the changes in the surface energy and the relevant wettability. Furthermore, XPS analyses were performed to investigate the chemical composition change in the e-beam irradiated surfaces; the results showed that the hydrophilic groups (C-O) increased after the electron beam irradiation. Also, water collection tests were performed for various polymer samples in order to investigate the effect of the surface energy on the ability of water collection, from which it can be seen that the irradiated surfaces revealed better water-collecting capability than pure polymer surfaces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.268-269
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.179-182
• /
• 2006

The effect of electron beam irradiation on dye sensitized solar cell (DSSC) has been studied to examine degradation of DSSC. The high-energy electron beam irradiation affects on the materials and performance of dye sensitized solar cells. We have checked the effects of electron beam irradiation of $TiO_2$ substrate with and without dye adsorption on the photovoltaic performances of resulting DSSCS and also studied the structural and electrical properties of polymers after irradiation. All solar cells materials were irradiated by electron beams with an energy source of 2MeV at different dose rates of 60 kGy, 120 kGy 240 kGy and 900 kGy and then their photoelectrical parameters were measured at 1 sun $(100 mW/cm^2)$. It was shown that the efficiency of DSSC was decreased as increasing the dose of e-beam irradiation due to lowering in $TiO_2$ crystallinity, decomposition of dye and oxidation of FTO glasses. On the other hand, the performance of solid-state DSSC with polyethylene oxide based electrolyte was improved after irradiation of e-beam due to enhancement of its conductivity and breakage of crosslinking.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.2
• /
• pp.130-135
• /
• 2021

Wrinkle patterns were fabricated on styrene-butadiene-styrene (SBS) block copolymer substrates using ion-beam (IB) irradiation with various intensities. The wavelength of the wrinkle pattern increased as the IB intensity was increased from 800 to 1,600 eV. IB irradiation-induced changes in the surface properties that were confirmed via physicochemical surface analyses. X-ray photoelectron spectroscopy analysis revealed chemical surface reformation due to the IB irradiation, resulting in C-O/C=O bonds after IB irradiation that were not reported before. These results indicate that the surface chemical modification caused by IB irradiation is strongly related to the surface modulus, which is important when fabricating wrinkle patterns. Furthermore, a strong IB irradiation induced a strong compressive strain; thus the size of the wrinkle pattern was increased.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.151-159
• /
• 2010

Changes in volatile organic compounds were investigated during storage after electron beam irradiation. Grapes were irradiated at 0.25, 0.5, 0.75, and 1.0 kGy and stored for 1 month at $4^{\circ}C$. Butanol, hexanal, [E]-2-hexenal, hexanol, and 3-methyl-butanol were the major volatile organic compounds of grapes. The types of volatiles in irradiated grapes were similar to those of non-irradiated samples but concentration differed among treatments. Some volatile compounds decreased during storage, whereas others, especially the esters, increased. Concentration of most volatile compounds were higher in pre-stored grapes than in post-stored fruit (thus, during the 30 days after irradiation by e-beam). Consequently, concentration of volatile organic compounds either increased or decreased after e-beam irradiation but these changes did not correlate with irradiation dose.