• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.21.1-21.3
• /
• 2019

Background: Treatment planning the correction of a transverse maxillary occlusal plane cant often involves a degree of qualitative "eyeballing", with the attendant possibility of error in the estimated judgement. A simple chair side technique permits quantification of the extent of asymmetry and thereby quantitative measurements for the correction of the occlusal plane cant. Methods: A measuring instrument may be constructed by soldering the edge of a stainless steel dental ruler at 90° to the flat surface of a similar ruler. With the patient either standing in natural head position, or alternatively seated upright in the dental chair, and a dental photographic retractor in situ, the flat under-surface of the horizontal part of this measuring instrument is placed on a unilateral segment of a bilateral structure, e.g. the higher maxillary canine orthodontic bracket hook. The vertical ruler is held next to the contralateral canine tooth, and the vertical distance measured directly from the canine bracket to the flat under-surface of the horizontal part of the measuring instrument. Results: This vertical distance quantifies the overall extent of movement required to level the maxillary occlusal plane. Conclusions: This measuring instrument and simple chair side technique helps to quantify the overall extent of surgical levelling required and may be a useful additional technique in our clinical diagnostic armamentarium.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.365-370
• /
• 2000

In this dissertation, in order to analyze the ground plane size which will affect the antenna characteristic, the appropriate antenna was designed and produced in compliance with the needs that the existing antenna should be improved, and then the optimum ground plane size was calculated. It was proved it affected the radiation characteristic greatly but didn't affect the impedance characteristic nearly when ground plane size of the existing folded slot antenna was enlarged with using the copper e cut in some size. Though it require the complicate procedure by the strict design in order to calculate exactly, if it is made of the antenna of the appropriate size that the effect of ground plane can be taken no account, it can be made easily.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.401-407
• /
• 2011

In order to enhance torque density of five-phase permanent magnetic synchronous motor with third harmonic injection for electric vehicles (EVs) applications, optimum seeking method for injection ratio of third harmonic was proposed adopting theoretical derivation and finite element analysis method, under the constraint of same amplitude for current and air-gap flux. By five-dimension space vector decomposition, the mathematic model in two orthogonal space plane, $d_1-q_1$ and $d_3-q_3$, was deduced. And the corresponding dual-plane vector control method was accomplished to independently control fundamental and third harmonic currents in each vector plane. A five-phase PMSM prototype with quasi-trapezoidal flux pattern and its fivephase voltage source inverter were designed. Also, the dual-plane vector control was digitized in a single XC3S1200E FPGA. Simulation and experimental results prove that using the proposed optimum seeking method, the torque density of five-phase PMSM is enhanced by 20%, without any increase of power converter capacity, machine size and iron core saturation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.817-825
• /
• 2001

The natural frequencies of a flexible spinning disk misaligned with the axis of rotation are studied in an analytic manner. The effects of misalignment on the natural frequency need to be investigated, because the misalignment between the axis of symmetry and the axis of rotation cannot be avoided in the removable disks such as CD-R, CD-RW or DVD disks. Assuming that the in-plane displacements are in steady state and the out-of-plane displacement is in dynamic state, the equations of motion are derived for the misaligned spinning disk. After the exact solutions are obtained for the steady-state in-plane displacements, they are plugged into the equation for the dynamic-state out-of-plane motion. The resultant equation is a linear equation for the out-of-plane displacement, which is discretized by the Galerkin method. Based on the discretized equations, the effects of the misalignment are analyzed on the vibration characteristics of the spinning disk, i.e., the natural frequencies and the critical speed

• Honam Mathematical Journal
• /
• v.36 no.1
• /
• pp.113-129
• /
• 2014

In this study, we have investigated the possibility of whether any Frenet plane of a given space curve in a 3-dimensional Euclidean space $\mathbb{E}_3$ also is any Frenet plane of another space curve in the same space. We have obtained some characterizations of a given space curve by considering nine possible case.

• YAKHAK HOEJI
• /
• v.17 no.2
• /
• pp.111-114
• /
• 1973

Je-chun clay, Hwa-soon bentonite, and Hwa-soon montmorillonite were treated with treated with organic solvents, i.e., ethylene glycol, ethanol, n-hexane, dioxane, ethylene chlorohydrin and obtained X-ray diffractograms were compared with those of the original samples. Organic solvent was adsorbed on the basal plane surfaces of Je-chun clay, Hwa-soon bentonite, Hwa-soon montmorillonite and, as a result, the axis spacing ws increased, However, organic solvent did not affect the non-expanding lattice of Japanese acid clay and the basal plane remained unchanged.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.34-38
• /
• 2002

기존에 제안된 도파관 스위치의 경우, 도파관의 E-plane에 PBG 기판을 내장하게 되는데, 이 경우 PBG 기판의 저항값을 조절해주는 MEMS 스위치의 바이어스 라인에 대한 문제점이 발생한다 본 논문에서는 PBG 기판을 도파관의 H-plane에 놓음으로써 바이어스 라인을 RF로부터 쉽게 분리하고, 또한 단일 공진 주파수를 갖는 PBG의 경우에 제한된 기판의 길이로 인하여 bandwidth가 좁아지는 문제점을 서로 다른 공진 주파수를 갖는 PBG 기판의 연결을 통해서 bandwidth를 약 80%이상 증가시킬 수 있음을 보였다.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.140-142
• /
• 2005

본 논문에서는 900MHz대역에서 전방향성 특성을 갖는 RFID tag용 다이폴 안테나를 설계하였다. 전방향성 특성을 얻기 위해 두 개의 다이폴 안테나를 대각으로 위치하고 $90^{\circ}$의 위상차를 주어 급전하였다. 시뮬레이션 툴을 이용한 결과 안테나의 이득은 1.78dB이었으며, E-plane 과 H-plane 모두 전방향성 특성을 보였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.101-104
• /
• 2007

We propose a novel optical configuration for transmissive and reflective mode in the IPS LC cell to improve the viewing angle characteristics in a diagonal direction. The optical design was performed on a Poincar$\dot{e}$ sphere. From the calculation, we confirmed that the proposed configuration provides excellent viewing angle characteristics.

• Journal of the Korean earth science society
• /
• v.34 no.1
• /
• pp.59-68
• /
• 2013

Focal mechanism solutions in the southwestern region of the Korean Peninsula ($34^{\circ}N-36^{\circ}N$, $126^{\circ}E-128^{\circ}E$) were obtained from the analysis of the recent 22 earthquakes ($M{\geq}2.0$) occurred from January, 2005 to March, 2011. The spatial differences between the epicenters recalculated by this study and those by KMA (Korea Meteorological Administration) and KIGAM (Korea Institute of Geoscience and Mineral Resources) are less than $0.05^{\circ}$, indicating a small deviation. However, they become a little bit larger in the coastal area due to a biased arrangement of seismic stations. Redetermined depths of hypocenters show a difference less than 12.7 km by comparison with the depth data announced by KIGAM. Most epicenters in inland area are located closely to the lineaments. Fault plane solutions were obtained from the analysis of P and SH wave polarities, and SH/P amplitude ratios. They show strike-slip faulting or strike-slip faulting with reverse components dominantly. The P-axes trends are mainly ENE-WSW or E-W directions. The direction of fault plane and auxiliary plane with 'NNE-SSW and WNW-ESE' or 'NE-SW and NW-SE' are dominant and almost parallel to the general trends of lineaments in the study area.