• Electronics and Telecommunications Trends
• /
• v.36 no.6
• /
• pp.36-45
• /
• 2021

As the global demand for satellite IoT services using small satellites increases, interest in their frequency requirements has also increased. Consequently, International Telecommunication Union Radiocommunication Sector (ITU-R) preparatory studies for WRC-23 include AI 1.18, which considers new frequency allocations for narrowband mobile satellites. This agenda item was issued in accordance with Resolution 284 (WRC-19), and contributions and reviews by government and satellite operators are underway at ITU-R SG4 WP4C with the aim of completing the study in 2023. Resolution 248 (WRC-19) considers the conditions for transmission of candidate bands and satellites and terminals for narrowband mobile satellite, and all contributions should satisfy narrowband mobile satellite system characteristics parameters within these conditions. However, among the current transmission specifications, there are several views on the exact definition of satellite e.i.r.p., and the derivation schedule of characteristic system parameters for the study is slower than that of the original work schedule. The goal of this paper is to examine the outline of WRC-23 AI 1.18 and the main content of Resolution 284 (WRC-19) and to determine the status of studies related to WRC-23 AI 1.18. The ITU-R's study on this agenda includes updating work schedules, developing the draft required spectrum and system characteristics parameter reports/recommendations, developing draft CPM reports, and examining the various views of transmission specifications in Resolution 284 (WRC-19). Focusing on candidate bands in Region 1 (Europe and Africa) and Region 2 (America), the current status of use in Korea is investigated and future countermeasures in Korea are investigated. In addition, we would like to examine the trend of narrowband mobile satellite through satellite frequency and service status and planning of satellite IoT operators, such as EchoStar, Omnispace, and Sateliot that are participating in the ITU-R study.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2020

This study aimed to investigate responses of plant growth and photosynthesis to different kinds of covering materials with selective light transmit for red leaf lettuce (Lactuca sativa L.). Experimental pot design was attached UV blocking filter, red filter, blue filter, and green filter. The kinds of covering materials showed significant results for plant growth especially control, UV blocking filter, and red filter. The photosynthetic rate and anthocyanin content of red leaf lettuce were higher in control and UV blocking filter than others. The quality of red leaf lettuce was low in red, green, and blue film treatments because of too low anthocyanin content.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.272-285
• /
• 2003

This study was conducted to observe the microscopic structures of cavities formed after ablation of primary teeth, permanent teeth, enamel and dentin in using a bur and cavities formed after ablation using laser and the following results were obtained after comparing the effects of ablation. Using a #330 bur and Er:YAG laser irradiated at 150 mJ, 200 mJ, 250 mJ and 300 mJ all at the frequency of 5 Hz, 1 mm enamel and dentin samples were ablated and the ablation time was measured. In order to measure the surfaces ablated, 5 each of primary teeth and permanent teeth were ablated using a #330 bur and Er:YAG laser at 150 mJ, 200 mJ, 250 mJ and 300 mJ for 1 sec and the cross section and vertical section were observed. The following results were obtained : 1. Cutting time of Er:YAG laser was longer than that of conventinal high-speed bur regardless of teeth type. 2. Cutting on enamel, Cutting time of conventional high-speed bur in deciduous teeth was longer than in permanent teeth(P<0.05). But Er:YAG laser was not showed any difference between the deciduous and permanent teeth(P>0.05). 3. Cutting on dentin, Cutting time of conventional high-speed bur in permanent teeth was longer than deciduous teeth. Er:YAG laser of 150 mJ, 5 Hz in permanent teeth was longer than in deciduous teeth(p<0.05). But laser of other power did not showed mean difference. 4. The cavity surface treated with the convetional high-speed bur revealed a relatively flat appearance, almost covered with a debris-like smear layer. Cavity wall showed striped appearance because of blade of bur. 5. The cavity surface treated by the Er:YAG laser system was irregular or rough surface with the absence charring, carbonization, or cracking of the dentin. In addition, there was an absence of a smear layer. Cavity floor was round and relatively smooth. According to these results, cutting time of Er:YAG laser was almostly same in permanent and deciduous teeth, but more effective in dentin than enamel. Cutting the sample, Er:YAG laser was needed more time than conventional bur. But SEM findings suggested that laser device produced favorable surface characteristic(i.e, no smear layer, irregular surface, cracking).

• Advances in environmental research
• /
• v.4 no.4
• /
• pp.247-262
• /
• 2015

The few lignin biomarker studies conducted in tropical environments are hampered by having to use references signatures established for plants and soils characteristic of the temperate zone. This study presents a lignin biomarker analysis (vanillyls (V), p-hydroxyls (P), syringyls (S), cinnamyls (C)) of the dominant plant species and soil horizons as well as an analysis of the interrelated terrigenous organic matter (TOM) dynamics between vegetation and soil of the $Tapaj{\acute{o}}s$ river region, an active colonization front in the Brazilian Amazon. We collected and analyzed samples from 17 fresh dominant plant species and 48 soil cores at three depths (0-5 cm, 20-25 cm, 50-55 cm) from primary rainforest, fallow forest, subsistence agriculture fields and pastures. Lignin signatures in tropical plants clearly distinguish from temperate ones with high ratios of Acid/aldehyde of vanillyls ((Ad/Al)v) and P/V+S. Contrary to temperate environments, similarly high ratios in tropical soils are not related to TOM degradation along with pedogenesis but to direct influence of plants growing on them. Lignin signatures of both plants and soils of primary rainforest and fallow forest clearly distinguish from those of non-forested areas, i.e., agriculture fields and pastures. Attalea speciosa Palm trees, an invasive species in all perturbed landscapes of the Amazon, exhibit lignin signatures clearly distinct from other dominant plant species. The study of lignin signatures in tropical areas thus represents a powerful tool to evaluate the impact of primary rainforest clearing on TOM dynamics in tropical areas.

• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.257-263
• /
• 2006

We have investigated the effect of silver added to Cu films on the microstructure evolution, resistivity, surface morphology, stress relaxation temperature, and adhesion properties of Cu(Ag) alloy thin films deposited on Mo glue layer upon annealing. In addition, pure Cu films deposited on Mo has been annealed and compared. The results show that the silver in Cu(Ag) thin films control the grain growth through the coarsening of its precipitates upon annealing at $300^{\circ}C{\sim}600^{\circ}C$ and the grain growth of Cu reveals the activation energy of 0.22 eV, approximately one third of activation energy for diffusion of Ag dopant along the grain boundaries in Cu matrix (0.75 eV). This indicates that the grain growth can be controlled by Ag diffusion along the grain boundaries. In addition, the grain growth can be a major contributor to the decreased resistivity of Cu(Ag) alloy thin films at the temperature of $300^{\circ}C{\sim}500^{\circ}C$, and decreases the resistivity of Cu(Ag) thin films to $1.96{\mu}{\Omega}-cm$ after annealing at $600^{\circ}C$. Furthermore, the addition of Ag increases the stress relaxation temperature of Cu(Ag) thin films, and thus leading to the enhanced resistance to the void formation, which starts at $300^{\circ}C$ in the pure Cu thin films. Moreover, Cu(Ag) thin films shows the increased adhesion properties, possibly resulting from the Ag segregating to the interface. Consequently, the Cu(Ag) thin films can be used as a metallization of advanced TFT-LCDs.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.491-500
• /
• 2019

The purpose of this study analyzed the overall attitude and perception of course evaluation of nursing students, and suggested improvement direction of course evaluation. The sample consist of 428 A-university students in J province. The collected data were analyzed by SPSS 23.0 program using ANOVA, t-test, and $Scheff{\acute{e}}$ test. As a result, it was confirmed that nursing students participated in course evaluation with a careful and correct response attitude, and course evaluation result was reliable. The instructor should share the process of improving the class by reflecting the evaluation results so that the students can recognize the purpose and importance of course evaluation. In addition, it suggested that it is necessary to develop items of a course evaluation reflecting the characteristic of nursing such as clinical practice courses and to revise the evaluation system.

• Korean Journal of Poultry Science
• /
• v.33 no.2
• /
• pp.127-131
• /
• 2006

This study was conducted to investigate the effects of expanding feed processing technologies on the egg characteristics and nutrient digestibility in laying hens. A total of two hundred seventy laying hens were randomly allocated into three treatments with fifteen replications for six weeks. Dietary treatments include 1) MS(mash), 2) EC(expanded crumble) and 3) EP(expanded pellet). In the egg production, the EC and EP treatments were significantly higher than MS treatment(p<0.05). However, no significant difference was founded in egg weight(p>0.05). Egg shell breaking was increased in EC and EP treatments compared with MS treatment(p<0.05), however, egg shall thickness showed no significant difference(p>0.05). Egg production and egg shell breaking were significantly higher in EC and EP treatments than MS treatment(p<0.05), but egg weight and egg shell thickness were no significantly difference among treatment(p<0.05). Yolk color was increased in EC treatment compared with other treatments(p<0.05). Also, yolk index was significantly improved in EC and EP treatments compared with MS treatment(p<0.05). Haugh unit was increased in EC treatment compared with MS treatment(p<0.05). EC treatment had improved DM, Ca and P digestibility. In conclusion, Expanded crumble and pellet processing could improve the egg characteristic and nutrient digestibility in laying hens.

• Korean Journal of Weed Science
• /
• v.13 no.2
• /
• pp.122-131
• /
• 1993

Differences in competitive characteristics for mineral nutrition were compared with rice and weeds according to rice planting types like the traditional hand transplanting, machine transplanting of young(10days old) and mature(30days old) seedling, flood direct seeding of germinated seeds and dry direct seeding of dry seeds. There was a slight competition for such nutrients as N, P, K, Ca, and Mg by E. crus-galli and E. kuroguwai in transplanting cultivations. However, nutrient uptake by rice in direct-seedings was severely inhibited throughout the whole growth period by the two weeds including annual weeds such as S. Juncoides and C. difformis. The competition for nutrients at different cultivation types was mainly governed by the dominant weeds.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.57-63
• /
• 2019

In order to facilitate the supply of gradually increasing power demand, it is also necessary to increase the number of power cables for power transmission as well as generation facilities. However, the expansion of electric power cables for supplying power to most urban areas requires a space for installation of additional cables, and the space for installing cables in domestic downtown areas is insufficient at present. The superconducting power cable, which can transmit more power with the same size, has emerged as an alternative to overcome the insufficient cable installation space. However, superconducting power cables, which have the advantage of large power transmission, have some losses in the AC (Alternating Current) system. Therefore, the design and analysis of AC losses are essential to introduce superconducting power cables in AC power transmission systems. In this paper, we analyze the AC loss of various superconducting power cables and consider the actual superconducting power cables and their application to the system. Although there is a theoretical calculation method of AC loss for single superconducting wire, it is not easy to calculate AC loss of superconducting power cable with large number. Therefore, the authors intend to analyze various kinds of superconducting power cable AC loss by using electromagnetic finite element analysis considering E-J (Electric field-Current density) characteristics of superconductivity. The analysis of the AC loss characteristics of the superconducting power cable will be an important factor in the design and development of the superconducting power cable to be applied to the actual system.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.36-44
• /
• 2010

The ambipolar diffusion equation has been solved in a fine-tube lamp of a few mm in diameter. In the diffusion of radial direction, the plasma diffuses and vanishes away at the glass wall by recombination with the characteristic time of plasma loss is given by $\tau_r\;=\;(r_0/2.4)^2/D_a$. With the radius $r_0{\sim}1\;mm$ and the ambipolar diffusion coefficient $D_a{\sim}0.01\;m^2/s$, the vanishing time is calculated $\tau_r{\sim}10\;{\mu}s$ which corresponds to the least value of frequency 30 kHz for the sustaining the plasma in the operation of high voltage AC-power. In the diffusion of longitudinal z-direction, a high density plasma generated at the area of a high voltage electrode, diffuses into the positive column with the characteristic time $\tau_z{\sim}0.1\;s$. The plasma diffusion velocity at the boundary of high density plasma is $u_D{\sim}10^2\;m/s$ at the time $t{\sim}10^{-6}$ s and the diffusion velocity becomes slow as $u_D{\sim}1\;m/s$ at $t{\sim}10^{-3}\;s$. Therefore, for the long lamp of 1 m, it takes about several seconds for the high density plasma at the area of electrode to diffuse through the whole positive column space.