• Radiation Oncology Journal
• /
• v.1 no.1
• /
• pp.29-36
• /
• 1983

The treatment of tumors along curved surfaces with stationary electron beams using cone collimation may lead to non-uniform dose distributions due to a varying air gap between the cone surface and patient. For large tumors, more than one port may have to be used in irradiation of the chest wall, often leading to regions of high or low dose at the junction of the adjacent ports. Electron-beam arc therapy may elimination many of these fixed port problems. When treating breast tumors with electrons, the energy of the internal mammary port is usually higher than that of the chest wall port. Bolus is used to increase the skin dose or limit the range of the electrons. We invertiaged the effect of various arc beam parameters in the isodose distributions, and combined into a single arc port for adjacent fixed ports of different electron beam eneries. The higher fixed port energy would be used as the arc beam energy while the beam penetration in the lower energy region would be controlled by a proper thickness of bolus. We obtained the results of following: 1. It is more uniform dose distribution of electron to use rotation than stationary irradiation. 2. Increasing isocenter depth on arc irradiation, increased depth of maximum dose, reduction in surface dose and an increasing penetration of the linear portion of the curve. 3. The deeper penetration of the depth dose curve and higher X-ray background for the smaller field sized. 4. If the isocenter depth increase, the field effect is small. 5. The decreasing arc beam penetration with decreasing isocenter depth and the isocenter depth effect appears at a greater depth as the energy increases. 6. The addition of bolus produces a shift in the penetration that is the same for all depths leaving the shape of the curves unchanged. 7. Lead strips 5 mm thick were placed at both ends of the arc to produce a rapid dose drop-off.

• Journal of Distribution Science
• /
• v.17 no.6
• /
• pp.77-84
• /
• 2019

Purpose - Although an extensive body of research in psychology and marketing focuses on perceived waiting time, no research has examined the effect of the location of the waiting place on perceived waiting time. In particular, this study suggests that customers who are waiting in a restaurant may have different perceived waiting time depending on whether they are in close proximity to the service area (e.g., dining area) or farther from it. In particular, the author examines how and why the location of the waiting place affects the perceived waiting time of the consumer and reveals the mental simulation as its psychological mechanism. Research design, data, and methodology - This study conducted field surveys with customers waiting in real restaurants. Eighty-eight people participated under two conditions: a restaurant with a waiting place near the dining area and a restaurant with a waiting place far from the dining area. Participants responded to questions about perceived waiting time (the dependent variable), mental simulation (the mediator), and demographic variables. To verify the hypothesis, ANOVA and bootstrapping analysis were performed. Results - The major results from the field study are as follows. First, participants perceived wait time differently depending on the location of the restaurant's waiting place: participants in the restaurant with a waiting place close to the dining area perceived significantly shorter waiting times. Second, the effect of the location of the waiting place on the perceived waiting time was mediated by mental simulation: the closer the wait location is to the dining area, the more imagination the customer exercises about the meal, which in turn distracts attention from time flow and shortens the perceived wait time. Conclusion - This study has a theoretical implication in that it extends research on perceived waiting time as the first study of how and why the location of a waiting place affects a customer's perceived waiting time. It has a practical implication that can be used as a marketing tactics to improve the image of the service provider by changing the location of the waiting place.

• The Korean Journal of Mycology
• /
• v.29 no.2
• /
• pp.123-126
• /
• 2001

A survey of 43 soil samples collected from southern Korea has shown that nematophagous fungi occurred in a variety of habitats. Nine predatory and two endoparasitic species were isolated. Habitats were classified into four types, i. e., mountain, upland, paddy field and greenhouse. Of these, greenhouse and upland had the highest incidence of nematophagous fungi $(95{\sim}100%)$ compared with mountain (37.5%) and paddy field (16.7%). The most common species was Arthrobotrys oligospora Fres., which was isolated from 25.5% of soil samples. Net forming species were the most abundant (72.5%), followed by constricting ring (10.0%), adhesive hyphae (7.8%), endoparasitic fungi (5.0%), and adhesive knob (4.8%). Nematophagous fungi were isolated move frequently from cultivated soil rather than uncultivated mountainous soil.

• Journal of Aquaculture
• /
• v.11 no.4
• /
• pp.581-592
• /
• 1998

To know on the distribution and ecological characteristics of genus Corbicula field survey made from August 1997 to July 1998 in the North Kyungsang Province. Three species, i.e. Corbicula japonica, C. leand and C. papyracea, were inhabited in the North Kyungsang Provice. C. japonica was dioecious and oviparous species and C. leana and C. papyracea were monoecious and viviparous species.

• Nuclear Engineering and Technology
• /
• v.45 no.1
• /
• pp.81-88
• /
• 2013

Neutron spectrum analyses of spallation neutrons are conducted in the accelerator-driven system (ADS) facility at the Kyoto University Critical Assembly (KUCA). High-energy protons (100 MeV) obtained from the fixed field alternating gradient accelerator are injected onto a tungsten target, whereby the spallation neutrons are generated. For neutronic characteristics of spallation neutrons, the reaction rates and the continuous energy distribution of spallation neutrons are measured by the foil activation method and by an organic liquid scintillator, respectively. Numerical calculations are executed by MCNPX with JENDL/HE-2007 and ENDF/B-VI libraries to evaluate the reaction rates of activation foils (bismuth and indium) set at the target and the continuous energy distribution of spallation neutrons set in front of the target. For the reaction rates by the foil activation method, the C/E values between the experiments and the calculations are found around a relative difference of 10%, except for some reactions. For continuous energy distribution by the organic liquid scintillator, the spallation neutrons are observed up to 45 MeV. From these results, the neutron spectrum information on the spallation neutrons generated at the target are attained successfully in injecting 100 MeV protons onto the tungsten target.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.3
• /
• pp.163-172
• /
• 2013

The aquatic insect collected at six areas (each 2 for mountain area, plain field, and urban area) from 2009 to 2011 were classified to analyze the distribution and diversity of species. Frequency (number of aquatic insect: N), number of species (S), similarity index (C), richness index (R1, R2), variety index (V1, V2), evenness index (E1, E2, E3, E4, E5), and dominance index (D1) were investigated. Total N and S were 143 and 84, respectively. C matrix of 153 combinations was constructed with the average of 0.542. The average C of 3 years (0.659) was 9.9% P, more higher than the average C of 6 areas (0.560). The average values of the index of 18 plots were 2.28, 0.17, 1.24, 1.08, 0.07, 0.06, 0.01, 0.87, 0.31, 0.93 for R1, R2, V1, V2, E1, E2, E3, E4, E5, D1, respectively. The order in the coefficient of variation (CV) of the indicator for 18 plots was N (70.0%) > E3 (54.9%) > E1 (49.6%) > R2 (40.5%) > S (35.3%) > R1 (33.7%) > E2 (28.4%) > E5 (15.9%) > V1 (11.1%) > E4 (6.3%) > V2 (5.1%) > D1 (4.8%). The correlation matrix with 66 combinations between the indexes was constructed with statistical significance for 33 combinations. However, R1, V1, E2 and D1 were the proper indexes to represent species diversity of aquatic insect based on the correlation matrix and the theory of statistical independence. The richness index was highest in mountain, variety index in urban area, and evenness index in plain field. However, the dominance index was lowest in urban area.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.665-675
• /
• 2020

The aim of this article is to investigate the relationship between insurance and economic growth at aggregate and disaggregate level for the period 1982-2018. Very few studies have been carried out in this field, with contradictory results and using an aggregate data while, according to different authors, an aggregate data might provide spurious results. The author used Ordinary Least Squares Regressions (OLS) and Granger Causality tests to explore the strength and direction of the relationship between insurance and economic growth at an aggregate level. To check the relationship at disaggregate level life insurance, marine insurance, and property insurance are regressed on trade openness and investment, respectively. Non-life insurance at an aggregate level plays a positive and significant role in promoting economic growth, but life insurance has an insignificant impact on the Pakistan economy. On the other hand, non-life insurances at a disaggregated level such as marine insurance negatively affect a vital part of economic growth, i.e., trade. At the same time, property insurance has a significant and positive role in boosting investment. Life, marine, and property insurance Granger cause economic growth, trade, and investment in a single direction. Nevertheless, is a bi-directional relationship between economic growth and non-life insurance.

• Journal of Environmental Science International
• /
• v.7 no.1
• /
• pp.36-40
• /
• 1998

This study was carried out to investigate the collection Efficiency of mass in collector step at the different of physical gas characterization. This work has focused on the dependence of the collection efficiency of mass in the collector zone of a two-stage set up field with gas temperature T and the dew point tmeperature. To identify the dependence of the mass collection efficiency on the Bounded plate of the collector zone MP.k by the spectre electric resistance of dust $p_e$. and the relative humidify ${\varphi}$, 20 at- tempts have been made with three different gas temperature ($50{\circ}C, 80{\circ}C, 110{\circ}C$) at different dew point. At the specific electric resistance of dust $p_e$=$10^6{\Omega}m$ which relative humidity corresponds to $\phi$ > 15%, a easy rise of the sounded plate secluded dust mass share was measured atwain. As the result of the higher cohesion imprisonment power due to the adsorbtion of particle, the rinse of the relative humidity developed on the particle surface. Therefore, the collection efficiency of mass was not predominant the high temperature T in the collector zone, neither was the pecific ellectric resistance of dust dependent.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.117-128
• /
• 1999

The removal of nitrogen oxides(NOx) from $N_{2}/O_{2}$ gas using a pulsed corona discharge was investigated as a function of the reduced electric field(E/N) and the energy density(J/L). A kinetic model was developed to characterize the chemical reactions taking place in a pulsed corona discharge reactor. The model calculates the fractional concentrations of radical species at each pulse-on period and utilizes the radicals to remove NOx for the subsequent pulse-off period. Electron collision reaction data are calculated using ELENDIF program to solve Boltzmann equation for electron energy distribution function, and the subsequent chemical reactions are calculated using CHEMKIN-II program to solve stiff ODE(ordinary differential equation) problems for species concentrations. The corona discharge energy per pulse and the time-space averaged E/N were obtained by fitting the model to experimental data. The model calculation shows good agreement with the experimental data, and predicts the formation of other species such as $NO_{2}$, $O_{3}$ and $N_{2}O$.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.5
• /
• pp.246-252
• /
• 2002

Two-dimensional steady state simulations of planar type radio frequency inductively coupled plasma (RFICP) have been performed. The characteristics of RFICP were investigated in terms of power transfer efficiency, equivalent circuit analysis, spatial distribution of plasma density and electron temperature. Plasma density and electron temperature were determined from the equations of ambipolar diffusion and energy conservation. Joule heating, ionization, excitation and elastic collision loss were included as the source terms of the electron energy equation. The electromagnetic field was calculated from the vector potential formulation of ampere's law. The peak electron temperature decreases from about 4eV to 2eV as pressure increases from 5 mTorr to 100 mTorr. The peak density increases with increasing pressure. Electron temperatures at the center of the chamber are almost independent of input power and electron densities linearly increase with power level. The results agree well with theoretical analysis and experimental results. A single turn, edge feeding antenna configuration shows better density uniformity than a four-turn antenna system at relatively low pressure conditions. The thickness of the dielectric window should be minimized to reduce power loss. The equivalent resistance of the system increases with both power and pressure, which reflects the improvement of power transfer efficiency.