• Geomechanics and Engineering
• /
• 제1권3호
• /
• pp.219-239
• /
• 2009

Vertical vibration tests were conducted using model footings of different size and mass resting on the surface of finite sand layer with different height to width ratios and underlain by either rigid concrete base or natural red-earth base. A comparative study of the ratio of predicted and observed natural frequency ratio of the finite sand stratum was made using the calculated values of equivalent stiffness suggested by Gazetas (1983) and Baidya and Muralikrishna (2001). Comparison of results between model footings resting on finite sand stratum underlain by the rigid concrete base and the natural red-earth base showed that, the presence of a finite base of higher rigidity increases the resonant frequency significantly. With increase in H/B ratio beyond 2.0, the influence of both the rigid concrete and natural red-earth base decreases. Increase in the contact area of the footing increases the resonant frequency of the model footings resting on finite sand stratum underlain by both the types of finite bases. Both the predicted and the observed resonant frequency ratio decreases with increase in force rating and height to width ratio for a given series of model footing.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1299-1319
• /
• 2015

This paper presents a detailed parametric study, conducted using finite element tools to cover a range of several geometric and material parameters, on the behaviour of thin-walled partially encased composite (PEC) columns. The PEC columns studied herein are composed of thin-walled built-up H-shaped steel sections with concrete infill cast between the flanges. Transverse links are provided between the opposing flanges to improve resistance to local buckling. The parametric study is confined to eccentrically-loaded columns subjected to major axis bending only. The parameters that were varied include the overall column slenderness ratio (L/d), load eccentricity ratio (e/d), link spacing-to-depth ratio (s/d), flange plate slenderness ratio (b/t) and concrete compressive strength ($f_{cu}$). The overall column slenderness ratio was chosen to be the primary variable with values of 5, 10 and 15. Other parameters were varied within each case of L/d ratio. The effects of the selected parameters on the behaviour of PEC columns were studied with respect to the failure mode, peak axial load, axial load versus average axial strain response, axial load versus lateral displacement response, moment versus lateral displacement behaviour and the axial load-moment interaction diagram. The results of the parametric study are presented in the paper and the influences of each of the parameters investigated are discussed.

• Journal of the Korean Data and Information Science Society
• /
• 제10권1호
• /
• pp.243-250
• /
• 1999

We consider $Y=X{\lambda}Z,\;{\lambda}>0$, where X and Z are independent random variables, and Y is the length biased distribution or the equilibrium distribution of X. The purpose of this paper is to consider the distribution of X or Y when the distribution of Z is given and the distribution of Z when the distribution of X or Y is given, In particular, we obtain that the necessary and sufficient conditions for X to be $X^{2}({\upsilon})\;is\;Z{\sim}X^{2}(2)\;and\;for\;Z\;to\;be\;X^{2}(1)\;is\;X{\sim}IG({\mu},\;{\mu}^{2}/{\lambda})$, where $IG({\mu},\;{\mu}^{2}/{\lambda})$ is two-parameter inverse Gaussian distribution. Also we show that X is smaller than Y in the reverse Laplace transform ratio order if and only if $X_{e}$ is smaller than $Y_{e}$ in the Laplace transform ratio order. Finally, we can get the results that if X is smaller than Y in the Laplace transform ratio order, then $Y_{L}$ is smaller than $X_{L}$ in the Laplace transform order, and that if X is smaller than Y in the reverse Laplace transform ratio order, then $_{\mu}X_{L}$ is smaller than $_{\nu}Y_{L}$ in the Laplace transform order.

• Journal of the Korean Data and Information Science Society
• /
• 제25권1호
• /
• pp.219-226
• /
• 2014

In this paper, we derived estimators of reliability P(Y < X) and the distribution of ratio in the bivariate exponential density. We also considered the means and variances of M = max{X,Y} and m = min{X,Y}. We finally presented how E(M), E(m), Var(M) and Var(m) are varied with respect to the ones in the bivariate exponential density.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.400-405
• /
• 2015

PURPOSE. The purpose of this study is to mix dental ceramic powder in varying ratios and evaluate the effect of the mixing ratio on color and translucency. MATERIALS AND METHODS. The ceramic powder of shade A3 of the same product was mixed with the shade A2 of three products: IPS e.max Ceram (Ivoclar Vivadent, Schaan, Liechtenstein), Vintage Halo (SHOFU Inc., Kyoto, Japan), and Ceramco 3 (Ceramco-Dentsply, Burlington, NJ, USA) in the following fixed ratios (0 wt%, 25 wt%, 50 wt%, 75 wt%, and 100 wt%) and then fired. A total of 150 specimen of ceramic fired were manufactured in a regular size (W: 8.5 mm, L: 10.5 mm, and H: 1.5 mm). For color and translucency, $L^*$, $a^*$, and $b^*$ were measured and Two-way analysis of variance (ANOVA) and One-way analysis of variance (ANOVA) were used for data analysis (${\alpha}$=0.05). RESULTS. The higher the mixing ratio was, $L^*$, $a^*$, and $b^*$ of IPS e.max Ceram were all increased, and $L^*$ of Vintage Halo was reduced and $a^*$ and $b^*$ were increased. $L^*$ and $a^*$ of Ceramco3 were reduced and $b^*$ of Ceramco3 was increased. Color difference (${\Delta}E^*ab$) was increased in all three products as the mixing ratio got higher. Increased mixing ratios resulted in decreased translucency parameter (TP) values for IPS e.max Ceram but increased TP values for Vintage Halo and Ceramco3. CONCLUSION. In this limited study, CIE $L^*$, $a^*$, and $b^*$ were influenced by the mixing ratio of the A3 powders and porcelain powder mixtures represented a various color and translucency.

• 정신신체의학
• /
• 제5권1호
• /
• pp.97-107
• /
• 1997

As a preliminary step to develop the Daily stress Inventory(DSI) for assessing minor stressors frequently experienced in everyday lift. We examined the reliability and validity of the DSI. The Daily Stress Inventory(DSI), the Beck Depression Inventory(BDI), the State-Trait Anxiety Inventory(STAI), the Social Readjustment Rating Scale(SRRS) and the Minnesota Multiphasic Personality Inventory(MMPI) were administered to 111 college students. Compared with the weekly DSI Event, Impact and I/E ratio scores of the American college students, the weekly event and I/E ratio scores of the Korean college students were significantly higher but weekly Impact score was lower. The internal consistency reliability of the DSI as computed by Cronbach alpha was .98. The DSI I/E ratio scores were significantly correlated with the scores of State Anxiety$({\gamma}=.27)$ and Trait Anxiety${\gamma}=.24)$, but not with BDI scores. And the SSRS scores were not significantly correlated to the DSI Event or Impact and In ratio scores. Significant correlations were revealed between the DSI Impact scores and the Sc and Ma scales of the MMPI. And the correlation between the DSI I/E ratio scores and the L, D, Hy, Pd and Pa scales of the MMPI was also significant. But no significant correlation was found between the DSI Event scores and all the scales of the MMPI. This study suggests that the DSI can be a reliable and valid tool to assess the minor stress frequently experienced in everyday life future study should be directed to obtain normative data based on more varied and larger population. Especially gathering additional evidences for the validity of the DSI using other minor stressor scale will be required.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.352-357
• /
• 2016

An investigation of ribbed divergent channel was undertaken to determine the effect of rib pitch to height ratio on total friction factor and heat transfer results in the fully developed regime. The ribbed divergent rectangular channel with the channel exit hydraulic diameter ($D_{ho}$) to inlet channel hydraulic diameter ($D_{hi}$) ratio of 1.16 with wall inclination angle of 0.72 deg, at which the ratios (p/e) of 6,10, and 14 are considered. The ribbed straight channel of $D_{ho}/D_{hi}=1.0$ were also used. The ribbed divergent wall is manufactured with a fixed rib height (e) of 10 mm and the ratio of rib spacing (p) to height 6, 10, and 14. The measurement was run with range of Reynolds numbers from 24,000 to 84,000. The comparison shows that the ratio of p/e=6 has the greatest thermal performance in the divergent channel under two constraints; identical mass flow rate and identical pressure drop.

• 한국전자파학회논문지
• /
• 제15권9호
• /
• pp.880-887
• /
• 2004

본 논문에서는 2,630～2,655 MHz(25 MHz) 대역을 사용하며, CDM/QPSK 전송 방식에 기초한 위성 DMB system E의 시스템 파라미터 성능을 컴퓨터 시뮬레이션을 통하여 분석한다. 또한 이에 기초하여 동일한 주파수 대역을 사용하는 무선 CATV의 간섭 신호로부터 위성 DMB 시스템의 성능을 보장하기 위한 보호비 분석 및 설정 값을 제안한다. 위성 DMB와 동일한 주파수 대역을 사용하는 무선 CATV의 간섭 수신신호와의 보호비는 AWGN 채널에서 -16.3 dB, Rician Fading(Channel model A) 채 널의 경우 -11.3 dB가 보장되어야 함을 확인하였다. 이러한 연구 결과는 현재 진행중인 위성 DMB 시스템의 상용화에 중요한 기초 자료로 사용되어질 수 있을 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권2호
• /
• pp.185-191
• /
• 1998

A total of 240 weaned pigs (BW 5.4 kg) were allotted in a completely randomized block design to find out the optimum lactose : sucrose ratio for the weaned pigs. Treatments were 100:0 (A), 75:25 (B), 50:50 (C), 25:75 (D) and 0:100 (E) in lactose : sucrose ratio. For the first week after weaning, average daily gain (ADG) and feed/gain (F/G) were improved (p < 0.05) for pigs fed A, B and C diets compared to pigs fed diets D and E, but the average daily feed intakes (ADFI) of the pigs were not different. From d 7 to 14, no significant differences was found in ADG and ADFI among the treatments, but pigs fed the diets A, B and C had improved F/G compared with the pigs fed diets D and E (p < 0.05). From d 15 to 21, no significant differences were found in ADG, ADFI and F/G among the treatments. The digestibility of nutrients was not influenced by the lactose : sucrose ratio except nitrogen. Nitrogen digestibility of A diet was significantly higher than D and E diets (p < 0.05) but no significant differences were found among diets A, B and C. Dry matter and phosphorus excretions were not influenced by the treatments. The pigs fed diets A, B and C excreted significantly less nitrogen than the pigs fed diets D and E. In conclusion, the results suggest that sucrose can effectively replace up to 50% lactose in starter diets.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.797-806
• /
• 2009

The mechanical and thermal behaviors of polyamide-6/clay nanocomposites were studied using the continuum-based, micromechanical models such as Mori-Tanaka, Halpin-Tsai and shear lag. Mechanic-based model prediction provides a better understanding regarding the dependence of the nanocomposites' reinforcement efficiency on conventional filler structural parameters such as filler aspect ratio ($\alpha$), filler orientation (S), filler weight fraction (${\Psi}_f$), and filler/matrix stiffness ratio ($E_f/E_m$). For an intercalated and exfoliated nanocomposite, an effective, filler-based, micromechanical model that includes effective filler structural parameters, the number of platelets per stack (n) and the silicate inter-layer spacing ($d_{001}$), is proposed to describe the mesoscopic intercalated filler and the nanoscopic exfoliated filler. The proposed model nicely captures the experimental modulus behaviors for both intercalated and exfoliated nanocomposites. In addition, the model prediction of the heat distortion temperature is examined for nanocomposites with different filler aspect ratio. The predicted heat distortion temperature appears to be reasonable compared to the heat distortion temperature obtained by experimental tests. Based on both the experimental results and model prediction, the reinforcement efficiency and heat resistance of the polyamide-6/clay nanocomposites definitely depend on both conventional (${\alpha},\;S,\;{\Psi}_f,\;E_f/E_m$) and effective (n, $d_{001}$) filler structural parameters.