• Smart Structures and Systems
• /
• v.4 no.2
• /
• pp.221-232
• /
• 2008

This paper represents the final results of a research program sponsored by the European Commission through project WIND-CHIME ($\underline{W}$ide Range Non-$\underline{IN}$trusive $\underline{D}$evices toward $\underline{C}$onservation of $\underline{HI}$storical Monuments in the $\underline{ME}$diterranean Area), in which the possibility of using advanced seismic protection technologies to preserve historical monuments in the Mediterranean area is investigated. In the current research, the dynamic characteristics of two outstanding Mamluk-Style minarets, which similar minarets were reported to experience extensive damage during Dahshur 1992 earthquake, are investigated. The first minaret is the Qusun minaret (1337 A.D, 736 Hijri Date (H.D)) located in El-Suyuti cemetery on the southern side of the Salah El-Din citadel. The minaret is currently separated from the surrounding building and is directly resting on the ground (no vaults underneath). The total height of the minaret is 40.28 meters with a base rectangular shaft of about 5.42 ${\times}$ 5.20 m. The second minaret is the southern minaret of Al-Sultaniya (1340 A.D, 739 H.D). It is located about 30.0 meters from Qusun minaret, and it is now standing alone but it seems that it used to be attached to a huge unidentified structure. The style of the minaret and its size attribute it to the first half of the fourteenth century. The minaret total height is 36.69 meters and has a 4.48 ${\times}$ 4.48 m rectangular base. Field investigations were conducted to obtain: (a) geometrical description of the minarets, (b) material properties of the minarets' stones, and (c) soil conditions at the minarets' location. Ambient vibration tests were performed to determine the modal parameters of the minarets such as natural frequencies and mode shapes. A $1/16^{th}$ scale model of Qusun minaret was constructed at Cairo University Concrete Research Laboratory and tested under free vibration with and without SMA wire dampers. The contribution of SMA wire dampers to the structural damping coefficient was evaluated under different vertical loads and vibration amplitudes. Experimental results were used along with the field investigation data to develop a realistic 3-D finite element model that can be used for seismic risk evaluation of the minarets. Examining the updated finite element models under different seismic excitations indicated the vulnerability of such structures to earthquakes with medium to high a/v ratio. The use of SMA wire dampers was found feasible for reducing the seismic risk for this type of structures.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.163-173
• /
• 2011

In this paper, we propose a new paradigm of augmented reality board game environment and a portable game assistant(PGA) which can help gamers with strategy information. Previous AR board games consist of a private and public space. The public space provides rules of the game and shows the scene of game. And the gamers control game pieces in the public space. The previous games use the RFIDs for recognizing positions of the pieces, and the VR/AR environment for providing the scene of the game. However the RFIDs are expansive, and the VR/AR environment is inconvenient because it uses additional devices: the DataGlove, the digital pen, and the HMD. The proposed system recognizes positions of real pieces using the computer vision technique, and uses a monitor to provide dynamic effects. In the private space, previous systems provide entire screen of game and position of specific pieces, but cannot be controled the pieces by gamers. Therefore, in this system, we provide PGA that helps the user to plan of the strategy individually using universally mobile. The PGA helps to plan the strategy in the individual area, and to play easily in the side of the user's convenience.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.75-89
• /
• 2006

LBS (Location-Based Service) systems have become a serious subject for research and development since recent rapid advances in wireless communication technologies and position measurement technologies such as global positioning system. The architecture named the GALIS (Gracefully Aging Location Information System) has been suggested which is a cluster-based distributed computing system architecture to overcome performance losses and to efficiently handle a large volume of data, at least millions. The GALIS consists of SLDS and LLDS. The SLDS manages current location information of moving objects and the LLDS manages past location information of moving objects. In this thesis, we implement a monitoring technique for the GALIS prototype, to allow dynamic load balancing among multiple computing nodes by keeping track of the load of each node in real-time during the location data management and spatio-temporal query processing. We also propose a buffering technique which efficiently manages the query results having overlapped query regions to improve query processing performance of the GALIS. The proposed scheme reduces query processing time by eliminating unnecessary query execution on the overlapped regions with the previous queries.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.289-295
• /
• 1995

구조물의 동적부하에 대한 동적변형 응답을 정확히 예측하고, Over Design이나 Under Design이 아닌 합리적인 설계방안의 개발은 중요한 과제이다. 동적강도해석이나 소음 승차감과 같은 진동 및 충격에 기인하는 제반 문제를 복잡한 구조물을 대상으로 합리적으로 처리하기 위한 Dynamic Design Analysis는 높은 신뢰성의 추구와 더불어 필요불가결한 기술이 되고 있다. 동적해석 방법으로는 현재 유한요소법이 널리 사용되고 있으며 여러 종류의 범용 프로그램들이 보급되어 있는 실정이다. 그러나 특히 동적문제에 있어서는 형상이나 거동이 복잡한 구조물의 경우, 또는 차량의 차체와 같이 많은 장착물이 부착된 경우에는 유한요소법의 적용이 곤란하여, 지금까지 대처할 수 있는 유용한 방법이 없었다. 따라서 비교적 용이하고 간단하게 적용가능한 진동실험을 기초로 한 구조물의 동적 응답해석 및 설계 방안의 개발이 필요하다. 본 연구에서는 진동시험으로 얻어진 부분구조물의 응답특성과 결합특성으로부터 결합 후의 응답특성을 예측할 수 있는 방법을 전달함수합성이론을 기초로하여 프로그래밍 package화 한다. 그리고 평판구조물에 대하여 진동시험과 컴퓨터 시뮬레이션을 통하여 개발된 방법의 타당성을 검증한다. 또한 실제 차량에서 차체만의 진동시험과 엔진의 자유진동시험에 의한 시험데이터로부터 차체와 엔진이 마운트 결합된 후의 진동특성을 예측한다. 진동시험시에 입력과 출력에 노이즈가 필연적으로 혼입되어 주파수응답함수의 크기(magnitude)와 위상(phase)을 왜곡시킨다. 특히 위상의 왜곡은 복소수연산을 하는 전달함수합성법의 결과에 중요한 영향을 미치게 된다. 본 연구에서는 데이타 획득시 입력과 출력의 시간지연으로 생기는 위상왜곡을 보정하는 방법을 제시하고, 그 개선 정도를 조사한다.는 소견의 확실도로서 가능성을 표현한 것이다. 예를 들면, 진동진폭 스펙트럼상에 2X 성분이 상당히 크게 나타나 정렬불량의 가능성이 0.7 정도라고 판정하는 것 등은 이러한 수치적진리치를 이용하는 방법이다. 그러나 상기의 수치적 표현만으로는 확실도를 한개의 수치로서 대표하게 하는 것은 진단의 정밀도에 문제가 있을 것으로 생각된다. 따라서 언어적진리치가 도입되어 [상당히 확실], [확실], [약간 확실] 등의 언어적인 표현을 이용하여 애매성을 표현하게 되었다. 본 논문에서는 간이진단 결과로부터 추출된 애매한 진단결과중에서 가장 가능성이 높은 이상원인을 복수로 선정하고, 여러 종류의 수치화할 수 없는 언어적(linguistic)인 정보ㄷㄹ을 if-then 형식의 퍼지추론으로 종합하는 회전기계의 이상진단을 위한 정밀진단 알고리즘을 제안하고 그 유용성을 검토한다. 존재하여도 모우드 변수들을 항상 정확하게 구할 수 있으며, 또한 알고리즘의 안정성이 보장된 것이다.. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on bot

• Korean journal of communication and information
• /
• v.48
• /
• pp.90-108
• /
• 2009

While the term of the institution as social manifestation has been discussed intensively through various theoretical approaches over the last few years in Social Sciences, such a debate has been missing so far in Communication Sciences. This paper attempts a theoretical discussion about the media as an institution in the field of Communication Sciences by applying the theory of organizational sociological neo-institutionalism. This research started out with the question which influence exerts the media on organizations and participants. The media is understood as an institution in the sense of permanent monitoring systems which create a) normative expectations b) which become stronger in order to assert such normative expectations c) the norms are applied by the participants d) in this application process, the participants accept the organizations, look primarily for the chosen paragraphs and exert an influence to change the norms. Organizations orient themselves at the institutional rules, because this way, they want to gain legitimacy and support. The media unfold their influence on organizations through certain obligations in addition to the pressure of the participants who deal with the organization and the media. Thus, media cannot exert influence independent from the organizationbut the participants accept the situation, which is generated by the many conflicting processes within the organization, they analyse them and transfer them.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.687-694
• /
• 2018

The problem of wheel tread defects has become a major challenge for the health management of high-speed rail as a wheel defect with small radius deviation may suffice to give rise to severe damage on both the train bogie components and the track structure when a train runs at high speeds. It is thus highly desirable to detect the defects soon after their occurrences and then conduct wheel turning for the defective wheelsets. Online wheel condition monitoring using wheel impact load detector (WILD) can be an effective solution, since it can assess the wheel condition and detect potential defects during train passage. This study aims to develop an FBG-based track-side wheel condition monitoring method for the detection of wheel tread defects. The track-side sensing system uses two FBG strain gauge arrays mounted on the rail foot, measuring the dynamic strains of the paired rails excited by passing wheelsets. Each FBG array has a length of about 3 m, slightly longer than the wheel circumference to ensure a full coverage for the detection of any potential defect on the tread. A defect detection algorithm is developed for using the online-monitored rail responses to identify the potential wheel tread defects. This algorithm consists of three steps: 1) strain data pre-processing by using a data smoothing technique to remove the trends; 2) diagnosis of novel responses by outlier analysis for the normalized data; and 3) local defect identification by a refined analysis on the novel responses extracted in Step 2. To verify the proposed method, a field test was conducted using a test train incorporating defective wheels. The train ran at different speeds on an instrumented track with the purpose of wheel condition monitoring. By using the proposed method to process the monitoring data, all the defects were identified and the results agreed well with those from the static inspection of the wheelsets in the depot. A comparison is also drawn for the detection accuracy under different running speeds of the test train, and the results show that the proposed method can achieve a satisfactory accuracy in wheel defect detection when the train runs at a speed higher than 30 kph. Some minor defects with a depth of 0.05 mm~0.06 mm are also successfully detected.

• Journal of Distribution Science
• /
• v.14 no.12
• /
• pp.107-118
• /
• 2016

Purpose - In today's markets, new technologies such as social network systems and user generated contents have provided consumers with access to unlimited amounts of information and an ability to communicate with other consumers in the world. Specially, the massive of the internet and the development of online communities and interactive platforms offer the potential to cocreate with a large number of consumers. Significant changes in marketplace suggest that simply being consumer oriented is not enough, so firms must learn from and collaborate with consumers to create values that meet their individual and dynamic needs. In these sense, emergent perspectives in marketing highlight new opportunities for co-opting consumers as a means to define and cocreate value through their engagement. Although the importance of consumer co-creation with firms, the current literature lacks the respond to two questions: (1) who are the most competent consumers for creating the values with firm? and (2) what are the stimulaters to help the consumers engage for co-creation? To this answer the question, this research investigate how to structure consumer motivations to encourage consumers to be more engaged for co-creation and what drives a consumer to get involved to respond to a call for co-creation. Research design, data, and methodology - To empirically test the hypotheses, a survey was conducted among consumers who had experienced the co-creation including upstream, downstream, autonomous, and sponsored co-creation with the firms. We collected a total of 343 responses. After we excluded 37 questionnaire because of incomplete responses, a total of 306 questionnaire remained. Working with a sample of 306 responses in Seoul and Kwangju, hierarchical moderated regression is employed to test research hypotheses. Results - The results indicated that consumer creativity and emergent nature are positively related to engagement in co-creation including upstream, downstream, autonomous, and sponsored co-creation. Also, the relationships between consumer creativity/emergent nature and engagement in co-creation were moderated by intrinsic motivation in case of upstream and downstream co-creation. Finally, interaction effects between consumer creativity/emergent nature and extrinsic motivation were not significant. Conclusions - These results suggest that marketing managers have to consider the consumer personality such as creativity and emergent nature and stimulate the intrinsic motivation of consumer to achieve the co-creation project successfully.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.23-28
• /
• 2015

This paper is to identify the dynamic phenomenon of the marine pollution management that is connected directly or indirectly by using system dynamics analysis. The method used herein is based on system dynamics analysis that analyzed the sub-systems for marine pollution management. Furthermore designed feedback loop between system elements. And made total casual map of marine pollution management. The main results of the paper are the following : 1. It's necessary to equipments and technology development and law revision for feedback loop slump of initial measures delay in oil spill. 2. It should be come up with partnerships and new business for community corrosion non-proliferation caused by social conflicts. 3. Marine pollution management should be an obligation that must be minimized to include social conflicts in the community and national levels besides oil spill response on-site. This model confirmed the hidden cause of delay by existing response plans, manuals and programs. And oil spill response in broader sense is more important from now on. The result can be useful in the guidance of marine pollution and management.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.632-638
• /
• 2014

Nowadays, as part of an effort to increase the efficiency of propulsion shafting system, the revolution of the main diesel engine in CMCR(Contract Maximum Continuous Rating) is reduced whereas the stiffness of hull structure supporting the main diesel engine is relatively flexible. However, vibration problems related with resonant response of main diesel engine are increasing although top bracing is installed between the main diesel engine and the hull structures to increase natural frequency of engine body above CMCR to avoid resonant phenomenon. In this study, the dynamic characteristic of top bracing is reviewed by analyzing measuring results of general cargo ships which apply the hydraulic type instead of the friction type to control the natural frequency and the vibration of the engine body. Moreover, considering the vibration characteristic of the engine body and the hydraulic type of the top bracing by varying the number of top bracing, authors suggest the more effective way to control the vibration of the engine body despite of lower stiffness of the hull structure than in the past when the hydraulic type of top bracing is used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6977-6984
• /
• 2015

It is faced with the necessity of multi roll forming process of the ball slide rail which is made by adding the separate manufacturing processes, piercing, bending, trimming, to the roll forming process of a continuous plastic deformation, to improve the quality. However, the vibration and noise of the press machine in this process leads to the quality degradation of slide rail manufactured in this process. In this study, the roll was designed considering the optimal strain rates by the roll forming program with finite element method. And to estimate the static stability of the multi process the Von-Mises stress and deformation on the press was calculated with a structural analysis program. Also, to avoid driving systems in the resonance region their natural frequencies in the 1st and 2nd mode were calculated through the modal analysis. To verify its dynamic stability improvement the magnitudes of noise and vibration in the existing and studied system were compared using a microphone and accelerometers. And the widths and surface roughnesses of the rails which had been produced in the existing and studied process were measured. Therefore, it is known that multi roll forming process is stable in the analytical and experimental study.