• Radiation Oncology Journal
• /
• v.23 no.4
• /
• pp.217-222
• /
• 2005

Purpose: To develop the respiration simulating phantom with thermocouple for evaluating 4D radiotherapy such as gated radiotherapy breathing control radiotherapy and dynamic tumor tracking radiotherapy. Materials and Methods: The respiration monitoring mask(ReMM) with thermocouple was developed to monitor the patient's irregular respiration. The signal from ReMM controls the simulating phantom as organ motion of patients in real-time. The organ and the phantom motion were compared with its respiratory curves to evaluate the simulating phantom. ReMM was used to measure patients' respiration, and the movement of simulating phantom was measured by using $RPM^{(R)}$. The fluoroscope was used to monitor the patient's diaphragm motion. relative to the organ motion, respectively. The standard deviation of discrepancy between the respiratory curve and the organ motion was 8.52% of motion range. Conclusion: Patients felt comfortable with ReMM. The relationship between the signal from ReMM and the organ motion shows strong correlation. The phantom simulates the organ motion in real-time according to the respiratory signal from the ReMM. It is expected that the simulating phantom with ReMM could be used to verify the 4D radiotherapy.

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.1
• /
• pp.62-68
• /
• 1994

This study was aimed to compare the density of the functional microcirculation of hepatocellular carcinoma (HCC) with normal liver and to investigate the effect of hepatic-arterial oily chemoembolization (HAE) by radionuclide examination. Methods : Eight patients with HCC proven by biopsy in five, and clinically and radiologically in three were included. The mixture of 2 cc normal saline with three to four mCi of $^{99m}Tc$-MAA was infused through a hepatic-arterial catheter for a minute. Dynamic images were obtained at a rate of 4 sec per frame for a minute, and static images and SPECT were followed. Results : In three patients who underwent hepatic arterial angiography (HAA) alone, radioactivity was markedly increased in tumors compared to the adjacent liver immediately after infusion of $^{99m}Tc$-MAA. The ratios of tumoral and extratumoral up-take (T/E ratio) were above 6.5 (range; $6.5{\sim}l9$, mean; 12.5). In four of the five patients who under-went superselective HAE, T/E ratio were remark-ably decreased ($0.5{\sim}1.3$). The areas of embolization were better delineated in radionuclide study than in postembolization HAA. In the other one who was considered to be embolized completely on HAA, strong radiouptake in the tumor was disclosed (T/E ratio; 7.0). Conclusions : Therefore hepatic-arterial flow study with radionuclide imaging using $^{99m}Tc$-MAA can be a valuable method to assess the accurate embolization effect in HCC.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.5-9
• /
• 2004

In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A／D converter. The resolution of the OCT system is about 30$\mu\textrm{m}$ which corresponds to the theoretical resolution. Also, the cross-sectional image of ping-pong ball is measured. The OCT system is configured with Michelson interferometer which has a low contrast because of reducing the power of feedback interference light. Such a problem is overcomed by using the improved inteferometer. Also, in order to obtain the cross-sectional image within a short time, it is necessary to reduce the measurement time for improving the optical delay line.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.123-131
• /
• 2020

This study proposes a real-time rendering algorithm for lighting when each of more than 100,000 moving particles exists as a light source. Two 3D textures are used to dynamically determine the range of influence of each light, and the first 3D texture has light color and the second 3D texture has light direction information. Each frame goes through two steps. The first step is to update the particle information required for 3D texture initialization and rendering based on the Compute shader. Convert the particle position to the sampling coordinates of the 3D texture, and based on this coordinate, update the colour sum of the particle lights affecting the corresponding voxels for the first 3D texture and the sum of the directional vectors from the corresponding voxels to the particle lights for the second 3D texture. The second stage operates on a general rendering pipeline. Based on the polygon world position to be rendered first, the exact sampling coordinates of the 3D texture updated in the first step are calculated. Since the sample coordinates correspond 1:1 to the size of the 3D texture and the size of the game world, use the world coordinates of the pixel as the sampling coordinates. Lighting process is carried out based on the color of the sampled pixel and the direction vector of the light. The 3D texture corresponds 1:1 to the actual game world and assumes a minimum unit of 1m, but in areas smaller than 1m, problems such as stairs caused by resolution restrictions occur. Interpolation and super sampling are performed during texture sampling to improve these problems. Measurements of the time taken to render a frame showed that 146 ms was spent on the forward lighting pipeline, 46 ms on the defered lighting pipeline when the number of particles was 262144, and 214 ms on the forward lighting pipeline and 104 ms on the deferred lighting pipeline when the number of particle lights was 1,024766.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.195-211
• /
• 2010

An exhibition is defined as market events for specific duration to present exhibitors' main product range to either business or private visitors, and it also plays a key role as effective marketing channels. Especially, as the effect of the opinions of the visitors after the exhibition impacts directly on sales or the image of companies, exhibition organizers must consider various needs of visitors. To meet needs of visitors, ubiquitous technologies have been applied in some exhibitions. However, despite of the development of the ubiquitous technologies, their services cannot always reflect visitors' preferences as they only generate information when visitors request. As a result, they have reached their limit to meet needs of visitors, which consequently might lead them to loss of marketing opportunity. Recommendation systems can be the right type to overcome these limitations. They can recommend the booths to coincide with visitors' preferences, so that they help visitors who are in difficulty for choices in exhibition environment. One of the most successful and widely used technologies for building recommender systems is called Collaborative Filtering. Traditional recommender systems, however, only use neighbors' evaluations or behaviors for a personalized prediction. Therefore, they can not reflect visitors' dynamic preference, and also lack of accuracy in exhibition environment. Although there is much useful information to infer visitors' preference in ubiquitous environment (e.g., visitors' current location, booth visit path, and so on), they use only limited information for recommendation. In this study, we propose a booth recommendation methodology using Sequential Association Rule which considers the sequence of visiting. Recent studies of Sequential Association Rule use the constraints to improve the performance. However, since traditional Sequential Association Rule considers the whole rules to recommendation, they have a scalability problem when they are adapted to a large exhibition scale. To solve this problem, our methodology composes the confidence database before recommendation process. To compose the confidence database, we first search preceding rules which have the frequency above threshold. Next, we compute the confidences of each preceding rules to each booth which is not contained in preceding rules. Therefore, the confidence database has two kinds of information which are preceding rules and their confidence to each booth. In recommendation process, we just generate preceding rules of the target visitors based on the records of the visits, and recommend booths according to the confidence database. Throughout these steps, we expect reduction of time spent on recommendation process. To evaluate proposed methodology, we use real booth visit records which are collected by RFID technology in IT exhibition. Booth visit records also contain the visit sequence of each visitor. We compare the performance of proposed methodology with traditional Collaborative Filtering system. As a result, our proposed methodology generally shows higher performance than traditional Collaborative Filtering. We can also see some features of it in experimental results. First, it shows the highest performance at one booth recommendation. It detects preceding rules with some portions of visitors. Therefore, if there is a visitor who moved with very a different pattern compared to the whole visitors, it cannot give a correct recommendation for him/her even though we increase the number of recommendation. Trained by the whole visitors, it cannot correctly give recommendation to visitors who have a unique path. Second, the performance of general recommendation systems increase as time expands. However, our methodology shows higher performance with limited information like one or two time periods. Therefore, not only can it recommend even if there is not much information of the target visitors' booth visit records, but also it uses only small amount of information in recommendation process. We expect that it can give real?time recommendations in exhibition environment. Overall, our methodology shows higher performance ability than traditional Collaborative Filtering systems, we expect it could be applied in booth recommendation system to satisfy visitors in exhibition environment.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.119-142
• /
• 2015

With the explosive growth in the volume of information, Internet users are experiencing considerable difficulties in obtaining necessary information online. Against this backdrop, ever-greater importance is being placed on a recommender system that provides information catered to user preferences and tastes in an attempt to address issues associated with information overload. To this end, a number of techniques have been proposed, including content-based filtering (CBF), demographic filtering (DF) and collaborative filtering (CF). Among them, CBF and DF require external information and thus cannot be applied to a variety of domains. CF, on the other hand, is widely used since it is relatively free from the domain constraint. The CF technique is broadly classified into memory-based CF, model-based CF and hybrid CF. Model-based CF addresses the drawbacks of CF by considering the Bayesian model, clustering model or dependency network model. This filtering technique not only improves the sparsity and scalability issues but also boosts predictive performance. However, it involves expensive model-building and results in a tradeoff between performance and scalability. Such tradeoff is attributed to reduced coverage, which is a type of sparsity issues. In addition, expensive model-building may lead to performance instability since changes in the domain environment cannot be immediately incorporated into the model due to high costs involved. Cumulative changes in the domain environment that have failed to be reflected eventually undermine system performance. This study incorporates the Markov model of transition probabilities and the concept of fuzzy clustering with CBCF to propose predictive clustering-based CF (PCCF) that solves the issues of reduced coverage and of unstable performance. The method improves performance instability by tracking the changes in user preferences and bridging the gap between the static model and dynamic users. Furthermore, the issue of reduced coverage also improves by expanding the coverage based on transition probabilities and clustering probabilities. The proposed method consists of four processes. First, user preferences are normalized in preference clustering. Second, changes in user preferences are detected from review score entries during preference transition detection. Third, user propensities are normalized using patterns of changes (propensities) in user preferences in propensity clustering. Lastly, the preference prediction model is developed to predict user preferences for items during preference prediction. The proposed method has been validated by testing the robustness of performance instability and scalability-performance tradeoff. The initial test compared and analyzed the performance of individual recommender systems each enabled by IBCF, CBCF, ICFEC and PCCF under an environment where data sparsity had been minimized. The following test adjusted the optimal number of clusters in CBCF, ICFEC and PCCF for a comparative analysis of subsequent changes in the system performance. The test results revealed that the suggested method produced insignificant improvement in performance in comparison with the existing techniques. In addition, it failed to achieve significant improvement in the standard deviation that indicates the degree of data fluctuation. Notwithstanding, it resulted in marked improvement over the existing techniques in terms of range that indicates the level of performance fluctuation. The level of performance fluctuation before and after the model generation improved by 51.31% in the initial test. Then in the following test, there has been 36.05% improvement in the level of performance fluctuation driven by the changes in the number of clusters. This signifies that the proposed method, despite the slight performance improvement, clearly offers better performance stability compared to the existing techniques. Further research on this study will be directed toward enhancing the recommendation performance that failed to demonstrate significant improvement over the existing techniques. The future research will consider the introduction of a high-dimensional parameter-free clustering algorithm or deep learning-based model in order to improve performance in recommendations.

• The Korean Journal of Malacology
• /
• v.22 no.1 s.35
• /
• pp.27-38
• /
• 2006

We investigated the reproductive cycle with gonad developmental phases of Solen grandis by histological observations. Seasonal changes in biochemical components of the adductor muscle, visceral mass, foot muscle and mantle were studied by biochemical analysis, from January to December, 2005. The reproductive cycle of this species can be classified into five successive stages: early active stage (December to January), late active stage (January to March), ripe stage (March to July), partially spawned stage (June to July) and spent/inactive stage (July to December). Total protein content was the highest in the foot muscle, the content was high in January (early active stage), the lowest in April (ripe stage), and was the highest in August (partially spawned stage). In the visceral mass, total protein content began to increase in February (late active stage) and reached a maximum in March (ripe stage). Thereafter, it gradually decreased between June and July (partially spawned stage). There was a strong negative correlation in total protein contents between visceral mass and mantle (r = -0.594, p = 0.042). Meanwhile there was a positive correlation between the adductor muscle and foot muscle, the correlation was not statistically significant (r = 0.507, p = 0.093). Total lipid content was the highest in the visceral mass; it was more than 2 to 5-fold higher than that in the adductor muscle, foot muscle, and mantle. Monthly changes in total lipid content were also most dynamic in the visceral mass. It was relatively higher between January and February, showed a maximum in March (the ripe stage), decreased rapidly from April to July (ripe and partially spawned stage), and gradually decreased from September to December (spent/inactive stage). There was a strong positive correlation in total lipid content between foot muscle and adductor muscle (r = 0.639, p = 0.025). Tthough a negative correlation was found between visceral mass and mantle (r = -0.392), the correlation was not statistically significant (p = 0.208). Glycogen contents changed within relatively narrow range and were similar among different tissues. There was no statistically significant correlation in glycogen contents among tissues.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1739-1756
• /
• 2021

Atmospheric nitrogen dioxide (NO₂) is mainly caused by anthropogenic emissions. It contributes to the formation of secondary pollutants and ozone through chemical reactions, and adversely affects human health. Although ground stations to monitor NO₂ concentrations in real time are operated in Korea, they have a limitation that it is difficult to analyze the spatial distribution of NO₂ concentrations, especially over the areas with no stations. Therefore, this study conducted a comparative experiment of spatial interpolation of NO₂ concentrations based on two linear-regression methods(i.e., multi linear regression (MLR), and regression kriging (RK)), and two machine learning approaches (i.e., random forest (RF), and support vector regression (SVR)) for the year of 2020. Four approaches were compared using leave-one-out-cross validation (LOOCV). The daily LOOCV results showed that MLR, RK, and SVR produced the average daily index of agreement (IOA) of 0.57, which was higher than that of RF (0.50). The average daily normalized root mean square error of RK was 0.9483%, which was slightly lower than those of the other models. MLR, RK and SVR showed similar seasonal distribution patterns, and the dynamic range of the resultant NO₂ concentrations from these three models was similar while that from RF was relatively small. The multivariate linear regression approaches are expected to be a promising method for spatial interpolation of ground-level NO₂ concentrations and other parameters in urban areas.

• Cross-Cultural Studies
• /
• v.42
• /
• pp.451-474
• /
• 2016

Analysis of the syntactic structure of the modern Chinese adverbs for time 'Cengjing (曾經)' and 'Yijing (已經)' was performed to examine the tenses and aspects of the terms. The corresponding Korean words were examined and the terms in both languages were compared. The syntactic structures used in China and South Korea were found to be different. We hope the study of the Chinese language will help Korean students. 'Cengjing (曾經)' specific projects with 'aspect' of, 'Past experience aspect', 'Past continuous aspect', 'Past continuous aspect' in the past tense. [ED: unclear, please reword] These correspond to '_었 (았)_', '_었었_' in the Korean language. 'Yijing (已經)' has 'finished phase' of concrete projects, 'Past experience aspect', 'Past continuous aspect', also has a specific project tense, the 'past tense', 'present tense', 'future tense', and so tense. [ED: unclear, please reword] Adjectives can also be modified with a 'change of status'. These correspond to '_었 (았)_', '_고_', '_었었_', '곧' etc. in Korean. 'Cengjing (曾經)' and the dynamic auxiliary 'Guo (過)' were compared to determine whether they have the aspect and tense features. However, 'Guo (過)' can only modify the predicate verb, so it possesses only aspect characteristics. 'Cengjing (曾經)' modifies the range more widely. 'Yijing (已經)' may be modified by the adverb 'Zai (在)' whereas 'Cengjing (曾經)' may not. Additionally, 'Yijing (已經)' can be modified by predicate adjectives and noun predicates, while 'Cengjing (曾經)' cannot.