• 제목/요약/키워드: Dynamic motion

검색결과 3,558건 처리시간 0.032초

고온차단 기밀용 그라파이트의 고온 미끄럼마모 특성 평가 (Sliding Wear Properties of Graphite as Sealing Materials for Cut off Hot Gas)

  • 김연욱;김재훈;양호영;박성한;이환규;김범근;이성범;곽재수
    • 대한기계학회논문집A
    • /
    • 제37권11호
    • /
    • pp.1349-1354
    • /
    • 2013
  • 고온의 가스유로를 조절하는 개폐식(On-Off)밸브의 구동축과 라이너 사이에 위치하여 구동장치로의 고온 가스유입을 방지하는 기밀 소재에 대하여 연구하였다. 기밀 소재로 사용된 그라파이트(Graphite)는 구동장치에 의한 구동축의 지속적인 움직임으로 인해 마모가 발생한다. 본 논문은 고온가스 조절 밸브 내의 기밀 소재로 사용된 그라파이트(Graphite, HK-6)에 대한 상 고온 마모 특성을 평가하였다. 구동축의 소재인 레늄합금(W-25Re)에 대하여 그라파이트의 마모 시험을 수행하고 마찰계수와 비마모율을 비교하였다. 상온과 실제 작동 환경인 고온 $485^{\circ}C$에서 미끄럼속도와 접촉하중의 변화에 따른 마찰계수와 비마모율을 평가하였다. 마모표면의 SEM 분석을 통하여 상 고온 마모표면에 관찰되는 third body 를 확인하고 이로 인한 윤활효과를 고찰하였다.

고지자기학적 관점에서 본 추가령단층곡의 생성과 진화 (The Geodynamic Evolution of the Chugaryeong Fault Valley in a View Point of Paleomagnetism)

  • 이윤수;민경덕;황재하
    • 자원환경지질
    • /
    • 제34권6호
    • /
    • pp.555-571
    • /
    • 2001
  • 추가령 단층곡의 진화를 고찰하기 위하여, 철원-연천일원의 제4기 및 후기 백악기 화산암류로부터 채취한 총 16개 장소에서 163개 정향시료에 대하여 고지자기 연구를 실시하고 특성잔류자화를 구하였다. 후기 백악기의 지장봉 산성 화산암복합체의 상부 산성화산암규로부터 구한 고지자기극의 위치는 216.8$^{\circ}$E/7l.6$^{\circ}$N(dp=7.1$^{\circ}$, dm=10.0$^{\circ}$)로써 경상분지의 동시기의 것과 일치하는데 이는 추가령 단층선이 후기 백악기 이래로 커다란 지구조 운동을 경험하지 않은 것으로 해석된다. 제4기 전곡 현무암에 대한 연구 곁과(134.2$^{\circ}$E/86.5$^{\circ}$N; $A_{ 95}$=7.1$^{\circ}$)도 현재의 지구회전축과 통계적으로 일치함으로서 이를 지지한다. 그러나, 지상봉 산성화산암복할체의 하부의 고기 현무암류로부터 구한 특성잔류자화 방향은 장소간에 심하게 산포되어, 본 암체의 화산활동이 추가령 단층곡의 좌수향 주향이동단층에 기인하여 형성된 것으로 해석되었다 이는 후기 백악기의 추가령 단층곡의 진화사를 밝혀주는 중요한 증거이며, 동아시아의 FR 조구조 모델에 의해 잘 해석된다 이 논문은 FR모델로 조형한 추가령 단층곡의 생성과 진화에 대한 논의와 해석을 제공한다.다.

  • PDF

2주탑 콘크리트 사장교의 주요 부재 지진 취약도 분석 (Seismic Fragility Analysis by Key Components of a Two-pylon Concrete Cable-stayed Bridge)

  • 신연우;홍기남;권용민;연영모
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제24권4호
    • /
    • pp.26-37
    • /
    • 2020
  • 본 연구에서는 2주탑 콘크리트 사장교를 모델링하고 취약부재에 대한 비탄성 시간이력해석 결과들로부터 설계기준과 재료특성을 반영한 취약도 분석을 수행하여 콘크리트 사장교에 적합한 취약도 분석을 제시하고자 한다. 사장교의 지진 취약도 곡선을 작성하기 위해 사장교의 주요 취약부재에 대한 한계상태를 결정하고 비탄성 시간이력해석에 의한 응답값과 비교하여 손상상태를 구분한다. 입력지반운동에 대한 취약부위들의 동적응답이 각 구조부재의 한계상태를 초과할 손상확률을 최대지반가속도(PGA)에 대해 구함으로써 사장교의 지진 취약도 곡선을 작성하였다. 주탑의 취약도 곡선에 의하면 0.5g에서 보통손상상태의 확률이 교축방향의 경우 32%인데 반해 교축직각방향의 경우 7%로 나타나 동일 PGA에서 교축직각방향에 비해 교축방향의 손상확률이 더 높은 것으로 나타났다. 연결부의 지진 취약도 곡선을 보면 심한 손상상태의 손상확률이 다른 부재에 비해 매우 높은 수준을 보였는데 이는 지진에 의한 연결부의 손상이 주탑과 케이블의 손상에 비해 매우 민감하다는 것을 의미한다. 케이블의 지진 취약도 곡선에서는 보통손상상태 등급 이후의 손상확률이 점차 낮아져 완전손상상태에 이를 확률은 2.0g의 큰 지진에서도 30%미만의 확률을 가지는 것으로 나타났다.

복합구조물에 대한 비선형 직접스펙트럼법의 신뢰성 (Reliability of Nonlinear Direct Spectrum Method with Mixed Building Structures)

  • 강병두;김재웅
    • 한국지진공학회논문집
    • /
    • 제7권2호
    • /
    • pp.75-84
    • /
    • 2003
  • 대부분의 구조물들은 강한 지진을 받을 경우, 비선형 거동의 변형이 예상된다. 구조물의 내진평가는 구조물에 가해진 지진력에 대한 변위요구와 같은 구조물의 성능평가를 필요로 한다. 여러 가지 비선형해석법 가운데 구조물의 내진역량을 계산하기 위한 가장 정확한 방법은 비선형 시각이력해석(NRHA)이긴 하나 많은 시간과 노력이 요구되고 있다. 따라서 구조물의 비선형 거동을 보다 간편하게 예측하기 위한 정확하고 실용적인 비선형 약산해석법에 관한 연구들이 활발히 진행되고 있다. 일부 약산적 방법 중 능력스펙트럼법(CSM)은 개념적으로는 간단하나 반복적인 계산과정과 함께 때로는 해가 없거나 중복적인 해를 갖는 약점을 갖고 있다. 본 연구에서는 강성골격곡선으로부터 산정한 구조물의 초기 탄성진동주기 T와 응답스펙트럼으로부터 산정한 비선형 유사가속도 h$_{y}$ /g 및 연성비 $\mu$를 사용하여, 반복적인 계산과정 없이 복합구조물의 내진성능을 평가하는 비선형 직접스펙트럼법(NDSM)을 고려한다. 다양한 지진과 복합구조물에 대한 NDSM의 신뢰성과 실용성을 비선형 시각이력해석(NRHA) 결과와 비교함으로써 검토하였다.

인간과 결합한 내용기반 동영상 율제어 (A Content-based Video Rate-control Algorithm Interfaced to Human-eye)

  • 황재정;진경식;황치규
    • 한국통신학회논문지
    • /
    • 제28권3C호
    • /
    • pp.307-314
    • /
    • 2003
  • 일반적으로 화자와 같이 중요하게 인식되는 객체를 시퀸스 전체에서 높은 우선순위를 부여한다. 그러나 다중 객체 동영상 부호화에서 각 객체의 중요도는 시퀸스 전체에서 일관적이지 않고 프레임마다 변화되므로 시변적으로 중요도를 변화시킬 필요가 있다. 따라서 본 논문에서는 독립적 율제어 알고리즘과 정적 파라미터들인 객체 중요도 또는 우선 순위와 목표 PSNR, 가중치 왜곡에 따라 각 객체에 QP를 할당하는 포괄적 율제어 알고리즘을 설명하고 정적 파라미터 중 우선 순위는 카메라 인터페이스를 통해 인간의 시각적 관심도 또는 중요도에 따라 동적 파라미터로 적용하며 목표 PSNR 및 가중치 왜곡은 객체의 크기, 움직임, 왜곡의 세 변수를 기준으로 비율적으로 나타내어 가중치 왜곡 제어와 우선 순위 기반 제어 알고리즘에 적용하여 비트율 분배의 효율을 높이고 있다. 결과로서 중요도가 적은 객체에 대해서는 매우 적은 비트를 할당받게 하며 시각적 중요도가 높은 객체에 대해서는 많은 비트를 할당받게 한다. 또한 화질이 적정 수준으로 안정되는 안정화 시간도 15 프레임 이내로 줄어드는 효과를 보였다 PSNR의 측면에서도 다른 기법에 비해 평균레벨에서 2㏈ 이상 높아지는 결과를 얻어서 인간과 결합한 내용기반 부호기가 다중객체 통영상 부호기에 효과적으로 사용될 수 있음을 제시하였다.

강한 펄스자기장 자극에 의한 적혈구 연전현상의 활동성 조사 (Dynamics of Rouleaux Patterns of Red Blood Cells under Pulse Magnetic Field)

  • 황도근
    • 한국자기학회지
    • /
    • 제27권3호
    • /
    • pp.92-97
    • /
    • 2017
  • 펄스자기장을 인체에 자극했을 때 몸 안에 있는 이온성 전해물질에 의해 유도전류가 발생하며, 최근에는 이를 활용하여 자기장 치료기술이 새롭게 연구 개발되고 있다. 본 연구에서는 강한 펄스자기장을 자극했을 때, 여러 층으로 응집되어 붙어있는 적혈구 연전형성의 변화를 동역학적으로 조사 분석하였다. 적혈구의 연전형성은 여러 가지 원인에 의해 발생하는데 물리학적으로 보면 적혈구 중심에 있는 $Fe^{+3}$ 이온에 의한 전기장 발생과 혈액 내에 녹아있는 음이온의 상호작용이 원인으로 고려된다. 본 연구에서 사용된 펄스자기장의 세기와 시간은 0.27 Tesla, 0.102 msec이고 펄스 반복시간은 1초이다. 인체에 가한 펄스자기장의 자극시간은 5분에서 10분, 15분, 20분까지 증가시켰고, 이에 따라 적혈구의 연전상태 변화를 동영상으로 조사하였다. 펄스자기장을 10분 동안 가했을 때 적혈구의 연전상태는 매우 호전되어 대체로 개별로 분리되었으며 slide glass 위에서 이동속도 역시 가장 활발하게 움직여서 $8{\times}10^{-4}m/sec$로 증가하였다. 그러나 20분까지 자기장 자극을 증가시키면 오히려 적혈구의 연전상태가 증가하고 활동성이 떨어지는 것을 확인하였다. 이에 대한 해석은 좀 더 체계적인 연구와 분석이 필요해 보인다.

섬유로프 계류시스템의 크리프 효과가 부유체의 운동응답 및 계류선의 장력 변화에 미치는 영향에 관한 연구 (A Study on Creep Effect of Synthetic Fiber Rope Mooring System on Motion Response of Vessel and Tension of Mooring Line)

  • 박성민;이승재;강수원
    • 대한조선학회논문집
    • /
    • 제54권2호
    • /
    • pp.151-160
    • /
    • 2017
  • Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.

사질토 지반에 설치된 우산형 마이크로파일의 지진 시 수평거동 특성 (Horizontal Behavior Characteristics of Umbrella-Type Micropile Applied in Sandy Soil Subjected to Seismic Motion)

  • 김수봉;손수원;김진만
    • 한국지반환경공학회 논문집
    • /
    • 제21권7호
    • /
    • pp.5-16
    • /
    • 2020
  • 현재 경주지진 및 포항지진 발생으로 내진설계기준이 강화되어 기존 시설물에 대한 내진성능평가를 실시하고 있다. 기존 시설물의 피해를 최소화하면서 국한된 협소한 장소에서 시공이 가능한 마이크로파일공법을 개선하여 지진 시 내진성능효과를 확보하고자 한다. 개선방법은 주 기둥인 연직말뚝 주변에 우산형태로 경사말뚝을 시공하여 말뚝 상부의 사각접시형 플레이트에서 말뚝을 모두 일체화하는 것이다. 본 논문에서는 수치해석으로 사질토지반에서 다양한 지진파에 대해 우산형 마이크로파일의 수평변위 거동을 분석하였다. 수치해석 결과, 지반이 연약할수록 우산형 마이크로파일의 수평저항력의 효과가 우수하였다. 경사말뚝의 근입심도에 따른 분석결과, 동일한 지반강도에서 근입심도가 15m 이상일 경우에 수평변위 저감 효과가 뚜렷했으며, N치 30 이상의 지반에 정착하면 지진 시에 효과가 있는 것으로 확인되었다. 마이크로파일의 근입심도와 수평변위 억제효과가 비례하였으며, 대체적으로 지반이 약할수록 변위억제 효과가 컸다. 우산형 마이크로파일은 수직말뚝이 모멘트에 대한 저항을 하고, 경사말뚝이 축력에 대한 저항을 하는 복합저항효과가 있었다.

Interactive Navigational Structures

  • Czaplewski, Krzysztof;Wisniewski, Zbigniew
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
    • /
    • pp.495-500
    • /
    • 2006
  • Satellite systems for objects positioning appeared indispensable for performing basic tasks of maritime navigation. Navigation, understood as safe and effective conducting a vehicle from one point to another, within a specific physical-geographical environment. [Kopacz, $Urba{\acute{n}}ski$, 1998]. However, the systems have not solved the problem of accessibility to reliable and highly accurate information about a position of an object, especially if surveyed toward on-shore navigational signs or in sea depth. And it's of considerable significance for many navigational tasks, carried out within the frameworks of special works performance and submarine navigation. In addition, positioning precisely the objects other than vessels, while executing hydrographical works, is not always possible with a use of any satellite system. Difficulties with GPS application show up also while positioning such off-lying dangers as wrecks, underwater and aquatic rocks also other naturaland artificial obstacles. It is caused by impossibility of surveyors approaching directly any such object while its positioning. Moreover, determination of vessels positions mutually (mutual geometrical relations) by teams carrying out one common tasks at sea, demands applying the navigational techniques other than the satellite ones. Vessels'staying precisely on specified positions is of special importance in, among the others, the cases as follows: - surveying vessels while carrying out bathymetric works, wire dragging; - special tasks watercraft in course of carrying out scientific research, sea bottom exploration etc. The problems are essential for maritime economy and the Country defence readiness. Resolving them requires applying not only the satellite navigation methods, but also the terrestrial ones. The condition for implementation of the geo-navigation methods is at present the methods development both: in aspects of their techniques and technologies as well as survey data evaluation. Now, the classical geo-navigation comprises procedures, which meet out-of-date accuracy standards. To enable meeting the present-day requirements, the methods should refer to well-recognised and still developed methods of contemporary geodesy. Moreover, in a time of computerization and automation of calculating, it is feasible to create also such software, which could be applied in the integrated navigational systems, allowing carrying out navigation, provided with combinatory systems as well as with the new positioning methods. Whereas, as regards data evaluation, there should be applied the most advanced achievements in that subject; first of all the newest, although theoretically well-recognised estimation methods, including estimation [Hampel et al. 1986; $Wi{\acute{s}}niewski$ 2005; Yang 1997; Yang et al. 1999]. Such approach to the problem consisting in positioning a vehicle in motion and solid objects under observation enables an opportunity of creating dynamic and interactive navigational structures. The main subject of the theoretical suggested in this paper is the Interactive Navigational Structure. In this paper, the Structure will stand for the existing navigational signs systems, any observed solid objects and also vehicles, carrying out navigation (submarines inclusive), which, owing to mutual dependencies, (geometrical and physical) allow to determine coordinates of this new Structure's elements and to correct the already known coordinates of other elements.

  • PDF

심해공학수조에 적용되는 수중카메라를 이용한 세장체의 연속 거동 측정방법에 관한 연구 (Study on the Measurement System of Behavior of a Slender Structure using an Underwater Camera which is applied in DOEB)

  • 정동호;권용주;박병원;정재환;최종수;조석규;성홍근
    • 한국항해항만학회지
    • /
    • 제42권1호
    • /
    • pp.1-8
    • /
    • 2018
  • 본 연구에서는 세장체의 연속적인 거동을 전체 길이에 대하여 측정할 수 있는 계측시스템을 선정하며, 선정된 수중카메라 시스템의 성능평가를 수행한다. 수중카메라의 기초성능평가를 위하여 강체파이프의 강제가진 실험을 수행한다. 파이프의 상단을 강제가진장치에 고정시킨 후, 일정주기와 진폭으로 가진시켜 수중카메라를 이용하여 변위를 측정한다. 강제가진장치에 입력된 신호와 수중카메라에 계측된 신호를 비교하여 측정 정밀도를 평가한다. 연속체인 세장체 파이프의 강제가진 실험을 수행하여, 수중카메라 시스템의 실시간 3차원적인 측정 가능성을 정성적으로 평가한다. 본 수중카메라 시스템은 향후 국내 심해공학수조에 적용되어, 세장체구조물 및 계류선 등의 거동 측정에 활용될 것이다.