Browse > Article
http://dx.doi.org/10.3795/KSME-A.2013.37.11.1349

Sliding Wear Properties of Graphite as Sealing Materials for Cut off Hot Gas  

Kim, YeonWook (School of Mechanical Design Engineering, Chungnam Nat'l Univ.)
Kim, JaeHoon (School of Mechanical Design Engineering, Chungnam Nat'l Univ.)
Yang, HoYeong (School of Mechanical Design Engineering, Chungnam Nat'l Univ.)
Park, SungHan (Agency for Defense Development)
Lee, HwanKyu (Agency for Defense Development)
Kim, BumKeun (Dept. of Mechanical and Automotive Engineering, Inje Univ.)
Lee, SeungBum (Dept. of Mechanical and Automotive Engineering, Inje Univ.)
Kwak, JaeSu (Dept. of Aerospace and Mechanical Engineering, Korea Aerospace Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.37, no.11, 2013 , pp. 1349-1354 More about this Journal
Abstract
Sealing structure to prevent flowing hot gas into the driving device, located between the driving shaft and the liner of On-Off valve for controlling the hot gas flow path was studied. Wear occurs due to the constant movement of the driving shaft controlled by actuator on graphite as the sealing material. In this paper, the dynamic wear behavior in high temperature of graphite(HK-6) to be used as sealing material was evaluated. Reciprocating wear test was carried out for the graphite(HK-6) to the relative motion between shaft materials(W-25Re). The results of friction coefficient and specific wear rate according to contact load, sliding speed at room temperature and $485^{\circ}C$ considering the actual operating environment were evaluated. Through the SEM analysis of the worn surface, third body as lubricant films were observed and lubricant effect of third body was considered.
Keywords
Sealing Materials; Graphite; Wear Debris; Solid Lubricant; Third Body; Elevated Temperature;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kwon, S. K., Kim, Y. W., Ko, S. H. and Suh, S. H., 2011, "Pressure Control of a Variable Thrust Solid Propulsion System Using On-Off Controllers," Journal of the Korean Society of Propulsion Engineers Conference, Vol. 2011, No. 11, pp. 942-948.   과학기술학회마을
2 Kim Y. B., Ha, K. H., Kim, B. H. and Kuk, M. S., 2006, "A Study on Flow Characteristics for High Pressure and High Temperature Control Valve," Trans. Korean Soc. Mech. Eng. A, Vol. 2006, Issue. 6, pp. 1604-1609.
3 Senouci, A., Frene, J. and Zaidi, H., 1999, "Wear Mechanism in Graphite-Copper Electrical Sliding Contact," Wear, Vol. 225-229, Part 2, pp. 949-953.   DOI   ScienceOn
4 Wang, L. L., Zhang, L. Q. and Tian, M., 2012, "Effect of Expanded Graphite(EG) Dispersion on the Mechanical and Tribological Properties of Nitrile Rubber/EG Composites," Wear, Vol. 276-277, pp. 85-93.
5 Tokai Carbon Co. LTD (2013. March 26), "Tokai's Isotropic Graphite Data Sheet," Down Loads Datasheets, http://en.tokaicarbon.eu/wp-content/uploads/HK-6-2. pdf
6 Todd, L. H., 2009, "Properties of Tungsten-Rhenium and Tungsten-Rhenium with Hafnium Carbide," Journal of The Minerals, Metals and Materials Society, Vol. 61, Issue. 7, pp. 68-71.
7 Cho, K. Y., Kim, K. J., Lim, Y. S. and Chi, S. H, 2006, "Oxidation Behavior of Nuclear Graphite(IG110) with Surface Roughness," Journal of the Korean Ceramic Society, Vol. 43, No. 10, pp. 613-618.   과학기술학회마을   DOI   ScienceOn
8 Chen, B., Bi, Q., Yang, J., Xia, Y. and Hao, J., 2008, "Tribological Properties of Solid Lubricants(Graphite, h-BN) for Cu-Based P/M Friction Composites," Tribology international , Vol. 41, pp. 1145-1152.   DOI   ScienceOn
9 Fillot, N., Iordanoff, I. and Berthier, Y., 2007, "Wear Modeling and the Third Body Concept," Wear, Vol. 262, pp. 949-957   DOI   ScienceOn
10 Luo, X. W., Yu, S. Y., Sheng, X. Y. and He S. Y., 2005, "Temperature Effect on IG-11 Graphite Wear Performance," Nuclear Engineering and Design, Vol. 235, pp. 2261-2274.   DOI   ScienceOn