• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.86-92
• /
• 2017

In this study, a running performance evaluation and roller rig test was conducted to evaluate the applicability of a composite bogie frame, which has the role of the primary suspension. The composite bogie frame was made of a GEP224 glass/epoxy prepreg. Vehicle dynamic analysis was carried out on the composite bogie with three different kinds of side beam thicknesses (50 mm, 80 mm, and 150 mm). From the results, the composite bogie with a side beam thickness of 80 mm satisfied all the dynamic design requirements. Although the composite bogie with the side beam thickness of 50mm also met the design requirements, its critical speed was just a 2% margin to the requirement. In contrast, the model of the side beam thickness of 150mm did not meet the ride comfort. In addition, a composite bogie frame with the side beam thickness of 80 mm was fabricated and installed on a complete bogie. Moreover, the roller rig test using the fully equipped bogie was performed to evaluate the critical speed. During the test, the lateral excitation was imposed on the wheelsets to realize the rail irregularity. There was no divergence of the lateral displacement of the wheelsets while increasing the speed. The measured critical speed was similar to the predicted result.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1279-1291
• /
• 2000

The main objectives of this study were to analyze the concept of hope, so to provide basic data to develop a valid instrument to measure hope, and to develop hope enhancing nursing intervention a program for cancer patients. The hybrid model approach was applied in three phases, the theoretical phase, the empirical phase, and the analytic phase. The study was developed on universal attributes explaining generalized hope and specific hope, which were revealed in a comprehensive review of the literature. In the empirical phase, eight cancer patients undergoing chemotherapy were interviewed to reveal causes, motivation, and their resource of hope according to The Hope Assessment Guide (Farren, Herth, & Popovich, 1995). In the analytical phase, the results of the two previous stages of the study were compared. The results were as follows : In the theoretical phase, six dimensions of hope emerged; affective, cognitive, behavioral, affiliative, temporal and contextual dimension. The antecedent of hope was loss, crisis, uncertainity, and stress. The consequences were renewal, development of new methods, safety, peace and transcendental competence. In the empirical phase, these six dimensions emerged as theoretical phases were verified and specified as these descriptive terms: feeling, intention, expectation, activity, relation, future- orientation, reality and goal-setting. The antecedent factor of hope was occurrence or recurrence of cancer. The consequence of hope was ability to cope with real condition, feeling of safety and comfort, peace, development of new strategy and recovery of disease. The major content of hope in this phase was related to specific hope, but it was also influenced on by general hope. In the analytic phase, general and specific hope was renamed as trait and state hope. All attributes emerged at the empirical phases, and also emerged at the theoretical phase. However, cognitive and contextual dimensions were revised and specified. In conclusion, the concept of hope is divided into trait hope and state hope, and state hope is an anticipatory expectation that occurs at the time of a stressful stimulus, such as being diagnosed with cancer. Hope is a multidimensional dynamic energized mental state which has the dimensions of affective, cognitive, behavioral, affiliative, temporal and contextual. There should be further studies to develope the state and trait hope scale according to definition and attributes of hope investigated in this study. In addition, considering results of the empirical phase, the family is very a important factor as a resource of hope, so it is necessary to consider family in implementing a nursing intervention program to enhance hope.

• Korean journal of communication and information
• /
• v.79
• /
• pp.104-139
• /
• 2016

This study investigated how Korean media covered Japan's position on her past history issues proposed by Abe' Shinzo's cabinet. The researchers adopted Entman's analytical tools for frame analysis and the concept of "frame changing" proposed by Chi and McCombs. The analysis rendered several propositions. First of all, the Korean media's coverage on Japan's past history issues focused heavily on the current conflict among two nations rather than constructing a futuristic viewpoint based on a thorough discussion on the historical background of the topic. In addition, it emphasized that the conflict should be resolved by political negotiations between the two governments. Secondly, the news coverages depicted "comfort women" issues as the prime element of the conflict, describing Abe's cabinet as the major inducer of the conflict. Ideological and political divisions among Korean media did not significantly influence on how they frame Japan's past history issues. In general, Korean media took the stance of ethnocentric "patriotic journalism," advocating Korean government's position and covering the emotional reactions from Korean public instead of providing through and through objective news coverage on Japan's past history issues.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.2 s.54
• /
• pp.57-68
• /
• 2007

The mega frame system is becoming popular for the design and construction of skyscrapers because this system exhibits structural efficiency by allowing high rigidity of the structure while minimizing the amount of structural materials to be used. Since the mega frame system is usually adopted for super high-rise buildings, the comfort of occupants may be main concerns in the practical application of this system. For the enhancement of the serviceability of mega frame structures, a semi-active tuned mass damper (STMD) is developed in this study. To this end, a Magnetorheological (MR) damper is employed replacing passive damper as a semi-active damper to improve the control effect of a conventional TMD. Since a conventional finite element model of mega frame structures has significant numbers of DOFs, numerical simulation for investigation of control performances of a STMD is impossible by using the full-order model. Therefore, a reduced-order system using minimal DOFs, which can accurately represent the dynamic behavior of a mega frame structure, is proposed in this study through the matrix condensation technique To improve the efficiency of the matrix condensation technique, multi-level matrix condensation technique is proposed using the structural characteristics of mega frame structures. The efficiency and accuracy of the reduced-order control proposed in this study and the control performance of a STMD were verified using example structures.

• Journal of the Korean Society for Railway
• /
• v.14 no.3
• /
• pp.262-270
• /
• 2011

Track support stiffness which affected track maintenance and riding comfort had a big effect on the track and train. Also, track support stiffness of the track design which was based on theory differs from track support stiffness of the track generated on the field. Track support stiffness was generated by several factors such as dynamic wheel loads, vertical displacement of track, and stress at rail bottom on the field test. With the results of the field test was compared with theoretical value. This paper analyzed that track support stiffness of ballast depended on condition of ballast, and support stiffness of concrete track also depended on the characteristic of track structures such as, normal elastic fastening system, rail floating system and sleeper floating system. However, on the ballast and concrete track, the designed track support stiffness was underestimated less than the measured track support stiffness. When the track condition was estimated on service line, it would not consider the track condition on the field. Therefore, this study proposed the various track type and the range of track support stiffness based on the experimental test.

• Animal Bioscience
• /
• v.36 no.1
• /
• pp.75-83
• /
• 2023

Objective: The objective of this study was to describe a methodological procedure to quantify the heat production (HP) partitioning in basal metabolism or fasting heat production (FHP), heat production due to physical activity (HPA), and the thermic effect of feeding (TEF) in roosters. Methods: Eighteen 54-wk-old Hy Line Brown roosters (2.916±0.15 kg) were allocated in an open-circuit chamber of respirometry for O₂ consumption (VO₂), CO₂ production (VCO₂), and physical activity (PA) measurements, under environmental comfort conditions, following the protocol: adaptation (3 d), ad libitum feeding (1 d), and fasting conditions (1 d). The Brouwer equation was used to calculate the HP from VO₂ and VCO₂. The plateau-FHP (parameter L) was estimated through the broken line model: HP = U×(R-t)×I+L; I = 1 if t<R or I = 0 if t>R; Where the broken-point (R) was assigned as the time (t) that defined the difference between a short and long fasting period, I is conditional, and U is the decreasing rate after the feed was withdrawn. The HP components description was characterized by three events: ad libitum feeding and short and long fasting periods. Linear regression was adjusted between physical activity (PA) and HP to determine the HPA and to estimate the standardized FHP (st-FHP) as the intercept of PA = 0. Results: The time when plateau-FHP was reached at 11.7 h after withdrawal feed, with a mean value of 386 kJ/kg^0.75/d, differing in 32 kJ from st-FHP (354 kJ/kg^0.75/d). The slope of HP per unit of PA was 4.52 kJ/mV. The total HP in roosters partitioned into the st-FHP, termal effect of feeding (TEF), and HPA was 56.6%, 25.7%, and 17.7%, respectively. Conclusion: The FHP represents the largest fraction of energy expenditure in roosters, followed by the TEF. Furthermore, the PA increased the variation of HP measurements.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• Journal of Korean Academy of Nursing
• /
• v.20 no.3
• /
• pp.430-458
• /
• 1990

Care is a central concept of nursing. Nursing would not exist without caring. Care and quality of life are closely related. Human behavior is a manifestation of culture. We can say that caring and nursing care are expression of culture. The nurse must understand the relationship of culture with care for ensure quality nursing care. But knowledge of cultural factors in nursing is not well developed. Time and in - depth study are needed to find meaningful relationships between culture and care. Nurses recognized the importance of culturally appropriate nursing There are two care systems in culturally based nursing. The folk care system and the professional nursing care system. The folk care system existed long before the professional nursing care system was introduced into this culture. If the discrepancy between these two care systems is great, the client may receive inappropriate nursing care. Culture and subcaltures are diverse and dynamic in nature. Nurses need to know the caring behaviors, patterns, and their meaning in their own culture. In Korea we have taken some first step to study cultural nursing phenomena. It is not our intent necessarily to return to the past and develop a nationalistic of nursing, but to identify the core of traditional caring and relate that to professional nursing care. Our Assumptions are as follows : 1) Care is essential for human growth, well being and survial. 2) 7here are diverse and universal forma, expressions, patterns, and processes of human care that exist transcul - turally. 3) The behaviors and functions of caring differ according to the social structure of each culture. 4) Cultures have folk and professional care values, beliefs, and practices. To promote the quality of nursing care we must understand the folk care value, beliefs, and practices. We undertook this study to understand caring in our traditional culture. The Goals of this study were as follows : 1) To identify patterns in caring behavior, 2) To identify the structural components of caring, and 3) To understand the meaning and some principles of caring. We faised several questions in this study. Who is the care-giver? Who is the care-receipient? Was the woman the major care -giver at any time? What are the patterns in caring behavior? What art the priciples underlying the caring process? We used an interdisciplinary team approach, composed of representatives from nursing and anthropology, to contribute in -depth understanding of caring through a socicaltural perspeetive. A Field study was conducted in Ro-Bong, a small agricultural kinship village. The subjects were nine women and one man aged be or more years of age. Data were collected from january 15 to 21, 1990 through opem-ended in-depth interviews and observations. The interview focused on caring behaviors sorrounding birth, aging, death and child rearing. We analysed these data for meaning, pattern and priciples of caring. In this report we describe caring behaviors surrounding childbirth. The care-givers were primarily mothers- in -low, other women in the family older than the mother - to- be, older neighbor woman, husbands, and mothers of the mother-to- be. The care receivers were the mother-to-be the baby, and the immediate family as a component of kinship. Emerging caring behavior included praying, helping proscribing, giving moral advice(Deug - Dam), showing concern, instructing, protecting, making preparations, showing consideration, touching, trusting, encouraging, giving emotional comfort, being with, worrying about, being patient, preventing problems, showing by an example, looking after bringing up, taking care of postnatal health, streng thening the health condition, entering into another's feelings(empathizing), and sharing food, joy and sorrow The emerging caring component were affection, touching, nurtuing, teaching, praying, comforting, encouraging, sharing. empathizing, self - discipline, protecting, preparing, helping and compassion. Emerging principles of. caring were solidarity, heir- archzeal relationships, sex - role distinction. Caring during birth expresses the valve of life and reflects the valued traditional beliefs that human birth is given by god and a unique unifying family event reaching back to include the ancestors and foreward to later generations. In addition, We found positive and rational foundations for traditionl caring behaviors surrounding birth, these should not be stigmatized as inational or superstitious. The nurse appropriately adopts the rational and positive nature of traditional caring behaviors to promote the quality of nursing care.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.