• Korean Journal of Computational Design and Engineering
• /
• v.20 no.1
• /
• pp.84-92
• /
• 2015

In this study, we describe a method to analysis dynamic behavior of an offshore wind turbine in the frequency domain and expected effects of the method. An offshore wind turbine, which is composed of platform, tower, nacelle, hubs, and blades, can be considered as multibody systems. In general, the dynamic analysis of multibody systems are carried out in the time domain, because the equations of motion derived based on the multibody dynamics are generally nonlinear differential equations. However, analyzing the dynamic behavior in time domain takes longer than in frequency domain. In this study, therefore, we describe how to analysis the system multibody systems in the frequency domain. For the frequency domain analysis, the non-linear differential equations are linearized using total derivative and Taylor series expansions, and then the linearized equations are solved in time domain. This method was applied to analysis of double pendulum system for the verification of its effectiveness, and the equations of motion for the offshore wind turbine was derived with assuming that the wind turbine is rigid multibody systems. Using this method, the dynamic behavior analysis of the offshore wind turbine can be expected to take less time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2050-2058
• /
• 2000

A method for the inverse dynamic analysis of constrained multibody systems considering friction forces acting on kinematic joints is presented in this paper. The stiction and the sliding which represent zero and non-zero relative motions are considered during the inverse dynamic analysis. Actuating forces to control the position or the orientation of constrained multibody systems are usually calculated in the inverse dynamic analysis. An iterative procedure need to be employed to calculate the actuating forces when the friction is considered. Furthermore, the actuating forces are not uniquely determined during the stiction. These difficulties are resolved by the method presented in this paper.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1086-1093
• /
• 2004

The modal characteristics of constrained multibody systems undergoing constant accelerated motions are investigated in this paper. Relative coordinates are employed to derive the equations of motion, which are generally nonlinear in terms of the coordinates. The dynamic equilibrium position of a constrained multibody system needs to be obtained from the nonlinear equations of motion, which are then linearized at the dynamic equilibrium position. The mass and the stiffness matrices for the modal analysis can be obtained from the linearized equations of motion. To verify the effectiveness and the accuracy of the proposed method, two numerical examples are solved and the results obtained by using the proposed method are compared with those obtained by analytical and other numerical methods. The proposed method is found to be accurate as well as effective in predicting the modal characteristics of constrained multibody systems undergoing constant accelerated motions.

• 연구논문집
• /
• s.32
• /
• pp.95-102
• /
• 2002

An Internet-based dynamic analysis system, called P-DYN, for multibody dynamic systems is developed. All the interfaces of the system are accessible via Web browsers, such as Netscape or Explorer. The system uses a template type P-DYN/Modeler as a preprocessor. The P-DYN postprocessor composed of P-DYN/Plotter and P-DYN/Animator is developed in JAVA. The P-DYN/Solver for predicting the dynamic behavior is run on the server. Anyone who wants to analyze the dynamics of multibody systems or share results data can access the analysis system over the Internet regardless of their OS, platform, or location.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.429-436
• /
• 2005

This paper presents a precise and stable time integration method for dynamic analysis of vibration or multibody systems. A total system is divided into several subsystems and their responses are calculated separately, while the coupling effect is treated equivalently as constant force during time steps. By using iterative procedure to improve equivalent coupling forces, a precise and stable solution is obtained. Some examples such as a seismic response and multibody analyses were carried out to demonstrate its usefulness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.809-818
• /
• 1997

An efficient non-recursive formulation of dynamic force analysis has been developed for serially connected multibody systems. Although derivation of equations of motion is based on a recursive dynamic formulation with joint relative coordinates, in the proposed formulation, dynamic forces such as joint reaction forces and driving force are computed non-recursively for specified joints. The efficiency of the proposed formulation has been proved by the operational count and the CPU time measure, comparing with that of the conventional recursive Newton-Euler formulation. A simulation of 7-DOF RRC robot arm has been carried out to validate solutions of reaction forces by comparing with those from a commercial dynamic analysis program DADS.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.11
• /
• pp.919-925
• /
• 2016

In this study, multibody dynamic and mechanical analyses were conducted for the structure of roller chain bucket elevator system. The fatigue life of the roller chain elevator system was determined under static and fatigue loadings. Results of multibody dynamic analysis suggested that the maximum contact force occurred at the drive sprocket engagement point with the roller chain due to maximum tension. Fatigue analysis results suggest that the high load roller chain system is durable and safe because its life time is more than 700,000 cycles, close to its designed value (1,000,000 cycle). However, the contact portion of plate and pin needed a safety factor. The dynamic analysis of the heavy load roller chain was conducted with a multibody dynamic analysis program. The results obtained in this study can be utilized for dynamic analysis of roller chain systems in all industries.

• Journal of Mechanical Science and Technology
• /
• v.15 no.6
• /
• pp.693-698
• /
• 2001

The analysis of actuating forces (or torques) and joint reaction forces (or moments) are essential to determine the capacity of actuators, to control the system and to design the components. This paper presents an inverse dynamic analysis algorithm for flexible multibody systems with closed-loops in the relative joint coordinate space. The joint reaction forces are analyzed in Cartesian coordinate space using the inverse velocity transformation technique. The joint coordinates and the deformation modal coordinates are used as the generalized coordinates of a flexible multibody system. The algorithm is verified through the analysis of a slider-crank mechanism.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.699-704
• /
• 2003

A Internet-based dynamic simulation system, called P-DYN, for multibody dynamic systems is developed. All the interfaces of the system are accessible via Web browsers, such as Netscape or Explorer. The system uses a template type P-DYN/Modeler as a preprocessor. The P-DYN postprocessor composed of P-DYN/Plotter and P-DYN/Animator is developed in JAVA. The P-DYN/Solver for predicting the dynamic behavior is run on the server. Anyone who wants to simulate the dynamics of multibody systems or share results data can access the analysis system over the Internet regardless of their OS, platform, or location.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.194-204
• /
• 2003

A Web-based dynamic simulation system, called O-DYN, for multibody dynamic systems is developed. All the interfaces of the system are accessible via Web browsers, such as Netscape or Explorer. The system uses a block-diagram type O-DYN/Modeler developed in JAVA Applet as a preprocessor. The O-DYN postprocessor composed of O-DYN/Plotter and O-DYN/Animator is developed in JAVA Applet. The O-DYN/Solver for predicting the dynamic behavior is run on the server. Anyone who wants to simulate the dynamics of multibody systems or share results data can access the analysis system over the Internet regardless of their OS, platform, or location.