• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.333-346
• /
• 2019

Foam ceramic materials contribute to the explosion effect weakening on concrete structures, due to the corresponding excellent energy absorption ability. The blast resistance of concrete members could be improved through steel-foam ceramics as protective cladding layers. An approach for the modeling of dynamic response of steel-foam ceramic protected reinforced concrete (Steel-FC-RC) slabs under blast loading was presented with the LS-DYNA software. The orthogonal analysis (five factors with five levels) under three degrees of blast loads was conducted. The influence rankings and trend laws were further analyzed. The dynamic displacement of the slab bottom was significantly reduced by increasing the thickness of steel plate, foam ceramic and RC slab, while the displacement decreased slightly as the steel yield strength and the compressive strength of concrete increased. However, the optimized efficiency of blast resistance decreases with factors increase to higher level. Moreover, an efficient design method was reported based on the orthogonal analysis.

• Journal of the Korea Concrete Institute
• /
• v.13 no.6
• /
• pp.610-618
• /
• 2001

This paper investigates the relationships between dynamic elastic modulus and static elastic modulus or compressive strength according to curing temperature, aging, and cement type. Based on this investigation, the new model of the relationships we proposed. Impact echo method estimates the resonant frequency of specimens and uniaxial compression test measures the static elastic modulus and compressive strength. Type I and V cement concretes, which have the water-cement ratios of 0.40 and 0.50, are cured under the isothermal curing temperatures of 10, 23, and 50$\^{C}$ Cement type and aging have no large influence on the relationship between dynamic and static elastic modulus, but the ratio of dynamic and static elastic modulus comes close to 1 as temperature increases. Initial chord elastic modulus which is calculated at lower strain level of stress-strain curve, has the similar value to dynamic elastic modulus. The relationship between dynamic elastic modulus and compressive strength has the same tendency as the relationship between dynamic and static elastic modulus according to cement type, temperature and aging. The proposcd relationship equations between dynamic elastic modulus and static elastic modulus or compressive strength properly estimates the variation of relationships according to cement type md temperature.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.3
• /
• pp.333-345
• /
• 2015

This study evaluated the static and dynamic shear strength of cast-in-place anchors reinforced with hairpin bars in uncracked and cracked concrete. The anchors 30mm in diameter reinforced with D10 hairpin bar were designed with an edge distance of 150mm and an embedment depth of 240mm. The cracked specimens consisted of the orthogonal and parallel cracks to the direction of shear loads, respectively. The dynamic strength was evaluated using seismic qualification tests based on the ACI 355.2 standard. The shear strength of the hairpin reinforced anchor was hardly correlated to the concrete cracks and the dynamic strength was similar to its static shear strength. Finally, a consideration on the design strength of hairpin reinforced anchors was presented.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.397-405
• /
• 2014

To manufacture of high-performance semi-structural double-sided adhesive tape, 2-ethylhexyl acrylate (2-EHA) and acrylic acid (AAC) were used, and the syrup was prepared by UV irradiation in this study. The effects of the thickness, various inorganic filler contents, and filler types on the semi-structural properties of acrylic double-sided adhesive tape were investigated. The peel strength increased with increasing thickness and wetting time. In case of the thin thickness (under $250{\mu}m$) with decreasing true density of inorganic filler, the peel strength increased with increasing wetting time. The initial peel strength showed a higher value at a big size of inorganic filler, and the filler's size in adhesive tapes was confirmed by SEM images. The peel strength and dynamic shear strength increased as a proportional relationship with various inorganic fillers and contents, and these inorganic fillers in $0.1{\mu}m$ thickness indicated more effect on the dynamic shear strength of double-sided adhesive tape. From these results the thin acrylic double-sided adhesive tape determined to be use for applications as a high-performance semi-structural.

• Journal of Korean Academy of Rural Health Nursing
• /
• v.1 no.1
• /
• pp.49-58
• /
• 2006

Purpose: This study was done to investigate the effects of **the Thera-band exercise program on the lower extremities muscle strength and balance in rural female farmers. Method: The participants were 19 rural women age of 40 or over who were living in the area within the jurisdiction of a public health center in North Chung Province and who agreed to participate in the study. The Thera-band exercise program was implemented for 10 weeks from Jan 17. to Mar 31. 2005. Total time was 60 minutes, 5 times a week. Paired t-test was used to analyze the data using the SPSS program. Result: The results of study showed that thigh muscle strength(t= 6.718, p <.001) and the dynamic balance(t=4.934, p <.001) decreased significantly. Ankle muscle strength(t=-6.739, pp <.001) and static balance (t=-2.395, p=.025) increased significantly. Conclusion: The results suggest that the Thera-band exercise program could be effective in improving thigh muscle strength, ankle muscle strength, the static balance, and the dynamic balance of rural female farmers. Further study is needed to compare strength and balance before and after the exercise program and to use a control group for comparison. Also it is needed to do more study on the appropriate length of time that the intervention should be given in order to achieve maximum results.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.373-380
• /
• 2010

The purpose of this study was to evaluate the effects of recreational exercise on cognition, depression, dynamic balance and leg strength in elderly women. This study was nonequivalent control group pre-post test design. Subjects were divided into two group(exercise group=14, control group=13). Experimental group conducted recreational exercise program for eight-week. Cognition was assessed by K-WAIS(object assembly & digit symbol) and depression were assessed by questionnaire. Dynamic balance(DB) and leg strength(LS) were assessed by 244cm up & go and sit to stand respectively. The collected data analyzed by Wilcoxon singed rank test and Mann-Whitney U test. The exercise group significantly improved cognition(object assembly) and DB, but control group significantly reduced DB. DB in exercise group were significantly greater than in control group after eight-week. The program was effective on cognition and dynamic balance in elderly women.

• The Journal of Korean Physical Therapy
• /
• v.33 no.6
• /
• pp.278-285
• /
• 2021

Purpose: This study investigated the effects of open kinetic chain (OKC) exercise for the gastrocnemius (GCM) and tibialis anterior (TA) muscles on static and dynamic balance and muscle strength. Methods: We recruited 21 healthy participants, dividing them into 3 groups (GCM, TA, and non-exercise). Each group contains 7 participants. Two exercise groups (GCM and TA) performed OKC exercise with elastic bands twice per week for 4 weeks, while non-exercise group did nothing. We obtained the data for static and dynamic balance and muscle strength before and after the intervention. We used the Kruskal-Wallis test to compare and analyze the pre-post-intervention differences among the groups. Results: For static balance, the stability index of the TA group was the lowest for the dynamic platform (p<0.05). The dynamic balance of the TA group increased for the anterior and posteromedial directions (p<0.05). The peak torque increased in the TA group for dorsiflexion (D/F) movement and in the GCM group for plantar flexion movement compared with the other groups, except for the left direction during D/F (p<0.05). Conclusion: OKC exercises with elastic bands were effective for selectively increasing muscle strength. It is clinically thought that strength training for TA muscles will be effective among the muscles of the ankle.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.217-223
• /
• 2019

The relationship between balance and ankle muscle characteristics (strength and flexibility) may be important to identify those at an increased risk of falling and to develop fall-prevention training programs. The association between ankle muscle characteristics (strength and flexibility) and balance has not previously been studied. The purpose of this study assessed the relationship between ankle muscle characteristics and balance. Sixteen healthy participants volunteered to participate in the study. Dynamic balance measured using Y-balance kit. Ankle muscle characteristics (strength and flexibility) measured using hand-held dynamometer and goniometry. The results indicated a positive correlation between ankle invertor muscle strength and Y-balance test performance. Clinicians should consider ankle muscle strength during therapeutic interventions to improve dynamic balance.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2009-2020
• /
• 2004

A parametric study of the factors controlling static and dynamic denting, as well as local stiffness, has been made on simplified panels of different sizes, curvatures, thicknesses and strengths. Analyses have been performed using the finite element method to predict dent resistance and panel stiffness. A parametric approach is used with finite element models of simplified panels. Two sizes of panels with square plan dimensions and a wide range of curvatures are analysed for several combinations of material thickness and strength, all representative of auto-motive closure panels. Analysis was performed using the implicit finite element code, LS-NIKE, and the explicit dynamic code, LS-DYNA for the static and dynamic cases, respectively. Panel dent resistance and stiffness behaviour are shown to be complex phenomena and strongly interrelated. Factors favouring improved dent resistance include increased yield strength and panel thickness. Panel stiffness also increases with thickness and with higher curvatures but decreases with size and very low curvatures. Conditions for best dynamic and static dent performance are shown to be inherently in conflict ; that is, panels with low stiffness tend to perform well under impact loading but demonstrate inferior static dent performance. Stiffer panels are prone to larger dynamic dents due to higher contact forces but exhibit good static performance through increased resistance to oil canning.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.6
• /
• pp.327-335
• /
• 2004

Effect of spherodization of cementite on static and dynamic deformation behaviors of SCM415 steels was investigated in this study. Dynamic torsional test was conducted using torsional Kolsky bar with the strain rate of $1.6{\times}10^3/s$. Three type of specimens were used with different spherodization degree of cementite. Dynamic test results were analyzed comparing with static tensile results and microstructural changes. The obtained results are as follows; 1) All the specimens of static and dynamic tests showed a ductile fracture mode of dimple. Specimens of the dynamic test showed adiabatic shear bands on the beneath of fracture surface. 2) In static tensile test, decreased tensile strength and increased uniform and non-uniform elongations appeared as spherodization degree of cementite increased. 3) In dynamic torsional test, decreased shear strength and increased uniform elongation appeared as spherodization degree of cementite increased. 4) Due to the largest uniform elongation, superior cold forgeability at high speed is expected on high spherodization degree of cementite.