• 대한토목학회논문집
• /
• 제43권3호
• /
• pp.277-285
• /
• 2023

최근 지진의 규모와 빈도가 커짐에 따라 구조물의 붕괴를 막기 위하여 기둥의 연성화를 높이는 연구가 필요하다. 본 연구에서는 연속 횡방향철근으로 보강된 기둥의 성능 평가를 위해 선행연구에서 실험한 정적 압축 실험의 결과를 이용하여 원형기둥과 사각기둥 연속 횡방향철근으로 보강한 구조물의 동적해석에 관한 FE Model을 검증하고자 한다. 그 결과 연속 횡방향철근으로 보강한 기둥의 실험값과 동적해석에 관한 결과 값이 비슷한 거동을 보여 신뢰성이 높으며, 실제 구조물인 창촌교에 동적해석 FEM을 적용하여 검증하였다. 보강된 실험체에 파단이 날 때까지의 실험과 해석 값의 소산에너지를 보면 원형 나선, 원형 띠, 각형 나선, 각형 띠 순서로 소산에너지가 작았으며 실제구조물 해석 값의 에너지소산은 반대의 순서로 소산에너지가 원형 나선의 가장 작은 값이 나온다. 이 경우 실제 지진하중을 가하였을 경우 원형 나선의 기둥이 가장 파괴가 적게 일어났다는 판단이 된다. 또한 해석 결과 사각기둥과 원형기둥 모두 나선철근으로 보강된 기둥이 띠 철근으로 보강된 기둥보다 소산에너지 성능이 높아 연속횡방향철근으로 보강한 사각기둥의 사용성을 확인하였다.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.625-631
• /
• 2014

To investigate the deformation properties of TiC-(5-20) mol% Mo solid solution single crystals at high temperature by compression testing, single crystals of various compositions were grown by the radio frequency floating zone technique and were deformed by compression at temperature from 1250K to 2270K at strain rates from $5.1{\times}10^{-5}$ to $5.9{\times}10^{-3}/s$. The plastic flow property of solid solution single crystals was found to be clearly different among a three-temperature range (low, intermediate and high temperature ranges) whose boundaries were dependent on the strain rate. From the observed property, we conclude that the deformation in the low temperature range is controlled by the Peierls mechanism, in the intermediate temperature range by the dynamic strain aging and in the high temperature range by the solute atmosphere dragging mechanism. The work softening tends to become less evident with an increasing experimental temperature and with a decreasing strain rate. The temperature and strain rate dependence of the critical resolved shear stress is the strongest in the high temperature range. The curves are divided into three parts with different slopes by a transition temperature. The critical resolved shear stress (${\tau}_{0.2}$) at the high temperature range showed that Mo content dependence of ${\tau}_{0.2}$ with temperature and the dependence is very marked at lower temperature. In the higher temperature range, ${\tau}_{0.2}$ increases monotonously with an increasing Mo content.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.576-585
• /
• 2002

A three-dimensional Lagrangian explicit time-integration finite element code for analyzing the dynamic impact phenomena was developed. It uses four node tetrahedral elements. In order to consider the effects of strain rate hardening, strain hardening and thermal softening, which are frequently observed in high-velocity deformation phenomena, Johnson-Cook model is used as constitutive model. For more accurate and robust contact force computation, the defense node contact algorithm was adopted and implemented. In order to evaluate the performance of the newly developed three-dimensional hydrocode NET3D, numerical simulations of the oblique impact of mild steel plate by mild steel sphere were carried out. Ballistic limit about various oblique angle between 0 degree and 80 degree was estimated through a series of simulations with different initial velocities of sphere. Element eroding by equivalent plastic strain was applied to mild steel spheres and targets. Ballistic limits and fracture characteristics obtained from simulation were compared with experimental results conducted by Finnegan et al. From numerical studies, the following conclusions were reached. (1) Simulations could successfully reproduce the key features observed in experiment such as tensile failure termed "disking"at normal impacts and outwards bending of partially formed plus segments termed "hinge-mode"at oblique impacts. (2) Simulation results fur 60 degrees oblique impact at 0.70 km/s and 0.91 km/s were compared with experimental results and Eulerian hydrocode CTH simulation results. The Lagrangian code NET3D is superior to Eulerian code CTH in the computational accuracy. Agreement with the experimentally obtained final deformed cross-sections of the projectile is excellent. (3) Agreement with the experimental ballistic limit data, particularly at the high-obliquity impacts, is reasonably good. (4) The simulation result is not very sensitive to eroding condition but slightly influenced by friction coefficient.

• 소성∙가공
• /
• 제29권1호
• /
• pp.11-19
• /
• 2020

For microstructural analysis of a friction stir welded (FSWed) joint of advanced high-strength steels, dual phase (DP) and complex phase (CP) steels, are studied. FSWed joints are successfully fabricated in the following four cases: (i) DP/DP; (ii) CP/CP; (iii) DP/CP, where the advancing side is DP and the retreating side is CP; (iv) CP/DP, where the advancing side is CP and the retreating side is DP. The stir zone (SZ) of (i) the DP/DP joint mainly consists of lath martensite, while the stir zone of (ii) the CP/CP joint consists not only of lath martensite but also of bainite. In the case of (iii) DP/CP and (iv) CP/DP, they exhibit a similar microstructure including acicular-shaped phases in the joints; however, cross-sections of the joints show differences in material mixing in each case. In (iv) the CP/DP joint, temperature towards the CP steel is sufficient to cause softening, thus leading to better mixing than that in (iii) DP/CP. The phases of the SZ in each of the four cases are formed by phase transformation during the FSWed process; however, the transformed phase volume fraction of CP steel is lower than that of DP steel, indicating that dynamic recrystallization occurs mainly in CP steel. The hardness values of the SZ are significantly higher than those of the base materials, especially, the SZ of (iii) the DP/CP joint has the highest value due to highest fraction of lath martensite.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.9-18
• /
• 2014

PURPOSES : The objective of this study is to evaluate the applicability of the pitch, which is produced during SDA petroleum upgrading process, as a pavement paving material. In order for the purpose, the physical and chemical properties of the pitch are analyzed, and then the various plasticizers are applied in the pitch. METHODS : Two types of pitch are selected from oil refinery companies, which are owned the SDA petroleum upgrading process. Also, two types of asphalt binders, PG 64-22 and PG 58-22, are employed to compare with the pitch because these two types of asphalt binders are currently used as paving materials. For the chemical property of the pitch, the composition of SARA (Saturate, Aromatic, Resin, Asphaltene), the elementary composition, and the functional group are analyzed. For the physical property of the pitch, the basic material property tests, such as penetration test, softening point test, flash point test, ductility test, and rotational viscometer test, are performed. Also, the DSR (Dynamic Shear Rheometer) test and the BBR (Bending Beam Rheometer) test are conducted using asphalt binder specimens obtained by both short term aging (Rolling Thin Film Oven, RTFO) and long term aging (Pressure Aging Vessel, PAV) processes. The rheological property of each pitch type is evaluated as a function of temperatures and loading cycles. PG 64-22 asphalt binder is used as a control material. RESULTS AND CONCLUSIONS : The Pitch may not be suitable for the pavement paving material without modifications, but the pitch can be used as alternatives of modified addictive or asphalt. If low molecular component, such as saturate and aromatic components, are added in the pitch based on the development of various plasticizers, it has a strong possibility for the pitch to be used as a alternative. However, in order to verify the performance property of the pitch, further research is needed.

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.6-12
• /
• 2015

Thermal fatigue life of the automobile exhaust manifold is directly affected by the restraint force according to the structure of exhaust system and bead shape of the welded joints. In the present study, the microstructural changes and precipitation behavior during thermal fatigue cycle of the 18wt% Cr ferritic stainless steel weld heat affected zone (HAZ) considering restraint stress were investigated. The simulation of weld HAZ and thermal fatigue test were carried out using a metal thermal cycle simulator under complete constraint force in the static jig. The change of the restraint stress on the weld HAZ was simulated by changing the shape of notch in the specimen considering the stress concentration factor. Thermal fatigue properties of the weld HAZ were deteriorated during cyclic heating and cooling in the temperature range of $200^{\circ}C$ to $900^{\circ}C$ due to the decrease of Nb content in solid solution and coarsening of MX type precipitates, laves phase, $M_6C$ with coarsening of grain and softening of the matrix. As the restraint stress on the specimen increased, the thermal fatigue life was decreased by dynamic precipitation and rapid coarsening of the precipitates.

• 터널과지하공간
• /
• 제8권3호
• /
• pp.200-208
• /
• 1998

외부로부터 정적 혹은 동적 하중을 받는 암반절리의 거동특성을 규명하기 위해서 교란상태 개념(Disturbed State Concept, DSC)을 이용한 구성방정식 이론과 이 이론을 수치해석에 적용하기 위한 응력-변형률 관계식을 소개한다. 본 연구에서 제안한 DSC 이론은 변형준인 암반절 리가 상대적으로 손상되지 않은 상태(Relative Intact; RI)와 완전 파괴된 상태(Fully Adjusted; FA)의 혼합으로 표현될 수 있다는 가정에 기초를 두고 있다. 여기서 사용된 두가지 상태, 즉 RI 상태와 FA 상태는 암반절리의 파괴정도를 나타내는 지표가 된다. 이러한 가정을 기초로 임의의 하중을 받는 절리는 초기 RI 상태에서 점진적으로 재료 내부의 미세구조 조정기능을 거치면서 최종적으로 파괴가 발생하는 FA 상태로 진행한다. 본 연구에서는 RI 상태, FA상태 그리고 재료의 파괴정도를 나타내는 교란도 함수(D)를 해석적으로 정의하여 암반절리의 역학적 거동특성을 표현하기 위한 응용화를 시도하였다. DSC모델은 암반절리의 경화 및 연화특성을 표현할 수 있으며, 절리의 크기 및 표면의 거침도 등을 고려할 수 있다.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.107-116
• /
• 2013

PURPOSES: The liquid-type chemical warm-mix asphalt (WMA) additive has been developed. This study evaluates the basic properties of the additive and the mechanical properties of WMA asphalt and mixture manufactured by using the newly developed chemical additive. METHODS: First, the newly developed WMA additive was applied to the original asphalt by various composition of additive components and dosage ratio of additive. These WMA asphalt binders were evaluated in terms of penetration, softening point, rotational viscosity, and PG grade. Based on the binder test results, one best candidate was chosen to apply to the mixture and then the mechanical properties of WMA mixture were evaluated for moisture susceptibility, dynamic modulus, and rutting and fatigue resistance. RESULTS : According to the binder test, WMA asphalt binders showed the similar properties to the original asphalt binder except the penetraion index of WMA additive was a little higher than original binder. From the Superpave mix design, the optimum asphalt content and volumetric properties of WMA mixture were almost the same with those of hot mix asphalt (HMA) mixture even though the production and compaction temperatures were $30^{\circ}C$ lower for the WMA mixture. From the first set of performance evaluation, it was found that the WMA mixture would have some problem in moisture susceptibility. The additive was modified to improve the resistance to moisture and the second set of performance evaluation showed that the WMA mixture with modified chemical additive would have the similar performance to HMA mixture. CONCLUSIONS : Based on the various laboratory tests, it was concluded that the newly developed chemical WMA additve could be successfully used to produce the WMA mixture with the comparable performance to the HMA mixture. These laboratory evaluations should be confirmed by applying this additive to the field and monitoring the long-term performance of the pavement, which are scheduled in the near future.

• 한국강구조학회 논문집
• /
• 제29권3호
• /
• pp.229-236
• /
• 2017

이 연구에서는 고무스프링의 동적 압축실험을 수행하여 고무스프링의 거동 및 특성을 규명하고 압축 강성도를 계산하여 실제 설계값에 대해 알아보고자 하였다. 고무스프링의 동적 압축실험을 수행하기 위하여, L80-D55, L90-D58, L100-D60의 고무스프링의 형상계수를 구하여 총 9개의 고무스프링을 주문 제작 하여 실험에 사용하였다. 실험은 고무스프링의 길이에 따라 기압축을 제어하여 수행하였으며, 기압축은 변형률의 5%, 10%, 15%, 20%, 25% 순서로 증가시켰다. 실험결과를 통해 힘-변형률 곡선을 얻을 수 있었고, 변형률의 증가함에 따라 강도감소 현상과 강도증가 현상이 발생함을 확인하였다. 또한 고무스프링의 크기와 지름에 따라 강성저하 및 강성증가 현상이 확연하게 나타남을 확인하였고, 힘-변형률 곡선에서 할선기울기를 이용하여 유효 압축강성도를 추정하였다. 유효압축강성도를 이용하여 실제 설계에 사용할 수 있는 설계값을 제시하였다.

• 공업화학
• /
• 제23권5호
• /
• pp.433-439
• /
• 2012

본 연구에서는 도데실 글리시딜 에테르와 아미노에탄올을 반응시킨 후 디메틸 설페이트로 4급화시켜 분자 내에 2개의 라우릴기, 3개의 히드록실기를 가진 양이온 계면활성제 BHMAS (N,N-bis-(3'-n-dodecyloxy-2'-hydroxypropyl)-N-methyl-2-hydroxyethylammonium methyl sulfate)를 합성하였고, 생성물의 분자구조는 $^{1}H-NMR$, FT-IR 등의 기기분석을 통하여 확인하였다. 합성한 계면활성제의 CMC (critical micelle concentration)는 $9.12\;{\times}\;10^{-4}$ mol/L이며, CMC에서의 표면장력은 28.71 mN/m이었다. Maximum bubble pressure tensiometer를 사용하여 동적 표면장력을 측정한 결과, 공기와 수용액의 계면이 계면활성제 단분자에 의하여 포화되는 데 비교적 오랜 시간이 소요되었다. 1 wt% 계면활성제 수용액과 n-decane 사이의 계면장력은 0.045 mN/m이며, 평형에 도달하는 데 약 5 min의 시간이 소요되었다. 합성된 계면활성제의 흡착 특성이 매우 우수하였으며, 합성한 양이온 계면활성제가 섬유표면에 효과적으로 흡착되어 유연효과를 나타낼 수 있음을 확인하였다.