• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.173-177
• /
• 2015

In this study, effects of both the grafted ABS-g-MAH and the added graphene oxide (GO) on the impact strength of polycarbonate (PC)/poly(acrylonitrile-butadiene-styrene) (ABS) blends were discussed. The PC/ABS blends and PC/ABS/GO composites were fabricated by using twin screw extruder with ABS-g-MAH as a compatibilizer. The ABS-g-MAH was prepared by melting extrusion of ABS and maleic anhydride (MAH) with DCP (dicumyl peroxide) as an initiator using twin screw extruder and the synthesis of ABS-g-MAH was confirmed by the presence of carbonyl group (C=O) peak at $1780cm^{-1}$ of FT-IR spectrum. According to the thermal, rheological, and impact properties of PC/ABS blends, 5 phr (parts per hundred resin) of compatibilizer was chosen as an optimum content for the PC/ABS/GO composites. It was observed that the thermal decomposition of ABS/PC/GO composites increased with GO contents, but there was no significant changes or a decrease in the impact strength. Also the composite fabricated by ABS/GO showed small increase in the impact strength. From the result of the dynamic rheometer to observe the processing properties, the complex viscosities of PC/ABS blend including the compatibilizer increased, but the complex viscosities of composites added GO were not changed.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2004.06a
• /
• pp.60-61
• /
• 2004

Metabolic engineering is now a well established discipline, used extensively to determine and execute rational strategies of strain development to improve the performance of micro-organisms employed in industrial fermentations. The basic principle of this approach is that performance of the microbial catalyst should be adequately characterised metabolically so as to clearlyidentify the metabolic network constraints, thereby identifying the most probable targets for genetic engineering and the extent to which improvements can be realistically achieved. In order to harness correctly this potential, it is clear that the physiological analysis of each strain studied needs to be undertaken under conditions as close as possible to the physico-chemical environment in which the strain evolves within the full-scale process. Furthermore, this analysis needs to be undertaken throughoutthe entire fermentation so as to take into account the changing environment in an essentially dynamic situation in which metabolic stress is accentuated by the microbial activity itself, leading to increasingly important stress response at a metabolic level. All too often these industrial fermentation constraints are overlooked, leading to identification of targets whose validity within the industrial context is at best limited. Thus the conceptual error is linked to experimental design rather than inadequate methodology. New tools are becoming available which open up new possibilities in metabolic engineering and the characterisation of complex metabolic networks. Traditionally metabolic analysis was targeted towards pre-identified genes and their corresponding enzymatic activities within pre-selected metabolic pathways. Those pathways not included at the onset were intrinsically removed from the network giving a fundamentally localised vision of pathway functionality. New tools from genome research extend this reductive approach so as to include the global characteristics of a given biological model which can now be seen as an integrated functional unit rather than a specific sub-group of biochemical reactions, thereby facilitating the resolution of complexnetworks whose exact composition cannot be estimated at the onset. This global overview of whole cell physiology enables new targets to be identified which would classically not have been suspected previously. Of course, as with all powerful analytical tools, post-genomic technology must be used carefully so as to avoid expensive errors. This is not always the case and the data obtained need to be examined carefully to avoid embarking on the study of artefacts due to poor understanding of cell biology. These basic developments and the underlying concepts will be illustrated with examples from the author's laboratory concerning the industrial production of commodity chemicals using a number of industrially important bacteria. The different levels of possibleinvestigation and the extent to which the data can be extrapolated will be highlighted together with the extent to which realistic yield targets can be attained. Genetic engineering strategies and the performance of the resulting strains will be examined within the context of the prevailing experimental conditions encountered in the industrial fermentor. Examples used will include the production of amino acids, vitamins and polysaccharides. In each case metabolic constraints can be identified and the extent to which performance can be enhanced predicted

• Journal of Educational Research in Mathematics
• /
• v.14 no.2
• /
• pp.207-219
• /
• 2004

There have been studies reporting the increase in student confidence in mathematics when using technology. However, past studies indicating a positive correlation between technology and confidence in mathematics do not explain why they see this positive outcome. With increased availability and easy access to the Internet in schools and the development of free online virtual manipulatives, this research was interested in how the use of virtual manipulatives in mathematics can affect students confidence in their mathematical abilities. Our hypothesis was that the classes using virtual manipulatives which allows students to connecting dynamic visual image with abstract symbols will help students gain a deeper conceptual understanding of math concept thus increasing their confidence and ability in mathematics. The participants in this study were 46 fifth-grade students in three ability groups: one high, one middle and one low. During a two-week unit on fractions, students in three groups interacted with several virtual manipulative applets in a computer lab. Data sources in the project included a pre and posttest of students mathematics content knowledge, Confidence in Learning Mathematics Scale, field notes and student interviews, and classroom videotapes. Our aim was to find evidence for increased level of confidence in mathematics as students strengthened their understanding of fraction concepts. Results from the achievement score indicated an overall main effect showing significant improvement for all ability groups following the treatment and an increase in the confidence level from the preassessment of the Confidence in Learning Mathematics Scale in the middle and high ability groups. An interesting finding was that the confidence level for the low ability group students who had the highest confidence level in the beginning did not change much in the final confidence scale assessment. In the middle and high ability groups, the confidence level did increase according to the improvement of the contest posttest. Through interviews, students expressed how the virtual manipulatives assisted their understanding by verifying their answers as they worked and facilitated their ability to figure out math concept in their mind and visually.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.554-560
• /
• 2020

In the manufacturing process of flat panel displays, a high-precision planar motion stage is used to position a specimen. Stages of this type typically use frictionless linear motors and air bearings, and laser interferometers. Real-time dynamic correction of the yaw motion error is very important because the inevitable yaw motion error of the stage means a change in the specimen orientation. Gantry control is generally used to compensate for yaw motion errors. Flexure units that allow rotational motion are applied to the stage to apply this method to a stage using an air-bearing guide. This paper proposes a method to improve the constant speed motion performance of a H-type XY stage equipped with air bearing and flexure units. When applying the gantry control to the stage, including the flexure units, the cause of the mutual ripple generated from the linear motors is analyzed, and adaptive learning control is proposed to compensate for the mutual ripple. A simulation was performed to verify the proposed method. The speed ripple was reduced to approximately the 22 % level. The ripple reduction was verified by simulating the stage state where yaw motion error occurs.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.312-316
• /
• 2005

Adsorption characteristics of $CO_2$ on activated carbons were evaluated using dynamic adsorption method in a fixed bed with acid treatment, LiOH impregnation and water vapor supply. Physical and chemical properties of the activated carbons were measured using SEM, EDS, nitrogen adsorption, FTIR and XRD. Nitric acid treatment led to the decrease in BET surface area and the increase in oxygen content of virgin activated carbon, and it produced a new functional group that included nitrogen. For the reduction of BET surface area by LiOH impregnation, the nitric acid treated activated carbon (NAC) was less than the virgin activated carbon (AC). Large particles of LiOH were present on the carbon surface when the content of LiOH was over 2 wt%. The adsorbed amount of $CO_2$ on activated carbon in a fixed bed increased with the acid treatment, LiOH impregnation and water vapor supply. The XRD results indicated that LiOH was converted to $Li_2CO_3$ after the adsorption of $CO_2$ on LiOH precursor.

• Journal of the Korean association of regional geographers
• /
• v.8 no.2
• /
• pp.199-215
• /
• 2002

The socio-economic and environmental systems of world are in turmoil. International conflicts are placed in their geographical context through the integration of maps. Changes in the world political map have often been the outcome of wars and conflicts associated with major geopolitical transitions. We identify five basic types--proto-nationalism, unification nationalism, separation nationalism, liberation nationalism and renewal nationalism. Political leaders in a wide range of contexts have been able to appeal to the nationalist doctrine to justify their actions. In recent years indigenous peoples have found a new voice in their struggle for survival. Although colonial empire's ending followed long and bloody struggles in some places. We really cannot understand the modem world as a whole if we do not understand the dynamic of that part of it which has endured and struggled against colonialism. The patterns of the international conflicting area are divided internal conflict type, mixed conflict type, international conflict type. The formation factors of the international conflicting area are divided ethnic group, religion, colonialism, resource, territory. There has recently been a resurgence of Islam's importance in world affairs. The oil crises of the 1970s gave new international leverage to several Muslim states.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.512-519
• /
• 2007

The purpose of this study is to investigate the potential of a novel tissue engineering approach to regenerate intervertebral disc. In this study, thermosensitive scaffold (chitosan-Pluronic hydrogel) and nanofiber were used to replace the nucleus pulposus (NP) and annulus fibrosus of a degenerated intervertebral disc, leading to an eventual regeneration of the disc using the minimally invasive surgical procedure and organ culture. In preliminary study, disc cells were seeded into the scaffolds and cellular responses were assessed by MTT assay and scanning electron microscopy (SEM). Based on these results, we could know that tissue engineered scaffolds might provide favorable environments for the regeneration of tissues. Organ culture was performed in fresh porcine spinal motion segments with endplates on both sides. These spinal motion segments were classified into three groups: control (Intact), injured NP (Defect), and inserting tissue engineered scaffolds (Insert). The specimens were cultivated for 7 days, subsequently structural stability, cell proliferation and morphological changes were evaluated by the relaxation time, quantity of DNA, GAG and histological examination. In these results, inserting group showed higher relaxation time, reduced decrement of DNA contents, and accumulated GAG amount. Consequently, the tissue engineered scaffolds used in this study seen to be a promising base scaffolds for regenerative intervertebral disc due to its capacity to absorb external dynamic loading and the possible ideal environment provided for disc cell growing.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.1
• /
• pp.75-84
• /
• 1999

Although many studies on modelling of port competitive situation have been conducted, both theoretical frame and methodology are still very weak. In this study, therefore, a new algorithm called ESD (Extensional System Dynamics) for the evaluation of port competition was presented, and applied to simulate port systems in northeast asia. The detailed objectives of this paper are to develop Unit fort Model by using SD(System Dynamics) method; to develop Competitive Port Model by ESD method; to perform sensitivity analysis by altering parameters, and to propose port development strategies. For these the algorithm for the evaluation of part's competition was developed in two steps. Firstly, SD method was adopted to develop the Unit Port models, and secondly HFP(Hierarchical Fuzzy Process) method was introduced to expand previous SD method. The proposed models were then developed and applied to the five ports - Pusan, Kobe, Yokohama, Kaoshiung, Keelung - with real data on each ports, and several findings were derived. Firstly, the extraction of factors for Unit Port was accomplished by consultation of experts such as research worker, professor, research fellows related to harbor, and expert group, and finally, five factor groups - location, facility, service, cargo volumes, and port charge - were obtained. Secondly, system's structure consisting of feedback loop was found easily by location of representative and detailed factors on keyword network of STGB map. Using these keyword network, feedback loop was found. Thirdly, for the target year of 2003, the simulation for Pusan port revealed that liner's number would be increased from 829 ships to 1,450 ships and container cargo volumes increased from 4.56 million TEU to 7.74 million TEU. It also revealed that because of increased liners and container cargo volumes, length of berth should be expanded from 2,162m to 4,729m. This berth expansion was resulted in the decrease of congested ship's number from 97 to 11. It was also found that port's charge had a fluctuation. Results of simulation for Kobe, Yokohama, Kaoshiung, Keelung in northeast asia were also acquired. Finally, the inter port competition models developed by ESB method were used to simulate container cargo volumes for Pusan port. The results revealed that under competitive situation container cargo volume was smaller than non-competitive situation, which means Pusan port is lack of competitive power to other ports. Developed models in this study were then applied to estimate change of container cargo volumes in competitive relation by altering several parameters. And, the results were found to be very helpful for port mangers who are in charge of planning of port development.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.1
• /
• pp.33-45
• /
• 2003

This is a study that examines the fashion changes in the 20th century in terms of various subcultures in the period. Starting from defining the concept and the developing process of subculture, this study traces the history of subcultural styles from 1930s to 1990s, focusing on the way each generation resisted the main stream through its styles. This study is intended to provide a theoretical frame on the understanding of subcultural styles, with a close examination of its formative and developing process and characteristics. This study understands subcultural style as a way of deviate or resistant expression within a society. It differentiates itself from the main style by deliberately and publicly asserting its own identity, and, as a result, realizes in the form of fashion its repressed subconsciousness, resistance to the alienation from the society, and deviation from the normative ethics and morality of a society. The four types of subcultural styles presented in chapter 4 are based on their form of resistance, and they are classified and analyzed as follows: The first type is revision, which tries to revise and change the given form by adding new elements. There are two kinds of revision, one is dressing up, which dresses for success, and the other is minimal dressing. Hyperbole is the second type, which resists by emphasizing or hyperbolizing the main stream with its erotic, nihilistic, or dynamic forms. Two kinds of hyperbole are examined, one is hyperbole of masculinity, and the other is ostentatious hyperbole. The third type is reversal and rejection, which reverses the forms from the established sign system into its own secret code, or rejects the traditional taboos. This type include no dressing, and the reversal of sex identity. Isolation and redrawal is the fourth type, which tries to distance itself from the ritual code of the day. This type is divided into dressing of the escape from time, and dressing of the escape from space. The first group of this type is characterized by nostalgia or futurism. An emphasis is given on ethnicity, naturalism, or a closed space within a city in dressing of the escape from space. In conclusion, it can be said that subcultural style puts the foremost importance on individual freedom. Since 1990s, the distinction between the subcultural styles and high fashion gets somewhat blurred, while the liberal, sexual, life stylistic tension between the two groups are heightened.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.243-248
• /
• 1987

The U.S. Forest Service administers the world's largest forestry research organization. From its modest beginning in 1876, some 30 years before the United States national forest system was established, the research branch has devoted its effort to meet current and future information needs of the forestry community of the United States, not just for the U.S. Forest Service. The research branch is one of three major administrative units of the U.S. Forest Service. The others being the National Forest System and State and Private Forestry. Currently the National Forest System comprises 155 national forests, 19 national grasslands, and 18 utilization projects located in 44 states. Puerto Rico, and the Virgin Islands. The National Forest System manages these areas for a large array of uses and benefits including timber, water, forage, wildlife, recreation, minerals, and wilderness. It is through the State and Private Forestry branch that the U.S. Forest Service cooperates and coordinates forestry activities and programs with state and local governments, forest industries, and private landowners. These activities include financial and technical assistance in disease, insect, and fire protection ; plan forestry programs ; improve harvesting and marketing practices ; and transfer forestry research results to user groups. Forestry research is carried out through eight regional Forest Experiment Stations and the Forest Product Laboratory. Studies are maintained at 70 administrative sites, and at 115 experimental forest and grasslands. All of the current sciences that composed modern forestry are included in the research program. These range from forest biology (i. e. silviculture, ecology, physiology, and genetics) to the physical, mathematical, engineering, managerial, and social sciences. The levels of research range from application, developmental, and basic research. Research planning and priority identification is an ongoing process with elements of the research program changing to meet short-term critical information needs(i. e. protection research) to long-term opportunities(i. e. biotechnology). Research planning and priority setting is done in cooperation with National Forest Systems, forest industries, universities, and individual groups such as environmental, wilderness, or wildlife organizations. There is an ongoing review process of research administration, organization, and science content to maintain quality of research. In the U.S. Forest Service the research responsibility is not completed until the new information is being applied by the various user group : I. e. technology transfer program. Research planning and development in the U.S. Forest Service is a dynamic activity. Porgrams for the year 2000 and beyond are now in the planning stage.