• 환경위생공학
• /
• 제15권4호
• /
• pp.27-27
• /
• 2000

In order to treat the dyeing wastewater, the UV/TiO₂/H₂O₂ system was investigated, and proper pretreatment methods were examined to reduce the load on the system considering economical and technical efficiency. The results of this study were as follows: 1.UV/TiO₂/H₂O₂ system with pretreatment process was adopted, the result of Chemical coagulation and pH control units was pH 11→ coagulation → pH 4 and the optimum dosage of FeCl₃ was 600㎎/ℓ 2. Proper dosage of TiO₂in the UV/TiO₂/H₂O₂ system with pretreatment process was 2g/ℓ and H₂O₂ was 1000㎎/ℓ, UV contact time was 20min to get below 200㎎/ℓ of $COD_{Cr}$

• 환경위생공학
• /
• 제15권4호
• /
• pp.26-34
• /
• 2000

In order to treat the dyeing wastewater, the $UV/TiO_2/H_2O_2$ system was investigated, and proper pretreatment methods were examined to reduce the load on the system considering economical and technical efficiency. The results of this study were as follows: 1. $UV/TiO_2/H_2O_2$ system with pretreatment process was adopted, the result of Chemical coagulation and pH control units was $pH{\;}11{\;}{\rightarrow}{\;}coagulation{\;}{\rightarrow}{\;}pH{\;}4$ and the optimum dosage of $FeCl_3$ was $600mg/{\ell}$. 2. Proper dosage of $TiO_2$ in the $UV/TiO_2/H_2O_2$ system with pretreatment process was $2g/{\ell}$ and $H_2O_2$ was $1000mg/{\ell}$, UV contact time was 20min to get $200mg/{\ell}$ of $COD_{Cr}$.

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.837-845
• /
• 2017

D염색공단의 폴리에스테르 알카리 감량폐수 및 호발폐수가 혼합된 실제 종합염색폐수를 처리하기 위하여 D염색공단의 종합폐수처리장 반송슬러지를 고정한 폐타이어담체를 충전한 재순환 유동상 바이오필터와 소성된 $TiO_2$ 코팅-glass bead를 광촉매담체로 적용한 UV/광촉매반응기를 결합한 재순환 통합시스템을 구축하여 운전하였다. 그 결과로서 재순환 통합시스템의 총 $COD_{cr}$ 제거율과 총 색도 제거율 추이는 각각 약 81% 및 55% 정도를 유지하였다. 이러한 재순환 통합시스템의 총 $COD_{cr}$ 및 총 색도 제거율의 제고효과는 각각 최대 약 7% 및 3%로 평가되었다. 재순환 통합시스템의 유동상 바이오필터 및 광촉매반응공정은 총 제거율에 대한 상대기여도로서 각각 총 $COD_{cr}$ 제거율의 약 94% 및 6%를 처리하고, 총 색도 제거율의 약 86% 및 14%를 처리하였다. 이와 같이 재순환 통합시스템의 광촉매반응공정에서는 총 제거율에 대한 색도 제거율의 상대기여도가 $COD_{cr}$ 제거율의 상대기여도보다 약 2.4배 정도 컸다. 따라서 본 연구의 재순환 통합시스템에서 광촉매반응공정은 $COD_{cr}$ 제거보다 아조결합과 같이 염료에서 색을 나타내는 화학결합을 깨는 역할에 더욱 효율성이 있었다. 또한 본 연구의 재순환 통합시스템에서 각 단위공정들의 $COD_{cr}$ 및 색도 제거율이, 재순환 통합시스템의 총 $COD_{cr}$ 및 색도 제거율에 미치는 영향에 대한 모델식과 대수적 상관관계를 구하고 분석하였다.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.51-61
• /
• 2018

In this study, effluent water was produced through Submerged Membrane Bio-Reactor(SMBR) process, which is a simple system and decomposes organic matter contained in wastewater with biological treatment process and performs solid-liquid separation, Especially, ozone oxidation treatment process is applied to effluent water containing fluorescent whitening agent, which is a trace pollutant which is not removed by biological treatment, and influences the quality of reused water. The concentration of $COD_{Cr}$ in the SMBR was $449.3mg/{\ell}-COD_{Cr}$, and the concentration of permeate water was $100.3mg/{\ell}-COD_{Cr}$. The removal efficiency was about 70.1%. The amount of ozone required for the removal of the fluorescent whitening agent in the permeated water in SMBR was $6.67g-O_3/min$, and the amount of ozone required to remove $COD_{Mn}$ relative to the permeate water was calculated to remove $0.997mg-COD_{Mn}$ for 1mg of $O_3$.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.469-472
• /
• 2000

4종의 각 개별균주와 6가지 2균주조합별 실험을 실시한 결과 개별균주의 경우 평균 15%로 낮은 COD제거율을 보였다. 2균주조합의 경우는 NAR3A와 NBY3A가 50.3%로 가장 우수하게 나타났으며 평균 34.9%의 제거율을 보였다. 이러한 제거율은 단일균주에 비해 약 20%향상된 수치로서 단일균주 보다는 2균주조합에 의한 것이 보다 효율적인 것으로 나타났다. 반월의 염색단지 내 폐수처리장의 폐수를 이용하여 실험한 결과 거의 비슷하게 낮은 색도제거율을 나타냈다. 이는 본 연구에 이용된 균주의 경우 단일염료의 색도를 제거하는 실험에 의해 선별되어 다양한 성상의 염료가 함유되어 있는 실제폐수의 염료를 분해하기 힘들었기 때문이다. COD제거의 경우는 비교적 우수한 효율을 나타냈다.

• 한국물환경학회지
• /
• 제25권2호
• /
• pp.227-234
• /
• 2009

In this research, a retrofitting process, which consists of a pretreatment system (coagulation) for dye wastewater combined with a biological nutrient system (MLE process using media), for a sewage treatment plant that has to treat dye wastewater efficiently with domestic wastewater were developed and a pilot plant was operated for verifying adoptability and performance of the developed advanced process for dye wastewater. From the results of the pilot plant operation, BOD 52.9%, $COD_{Cr}$ 55.9%, and color 71.3% were removed in pretreatment of coagulation process and the biodegradability of dye wastewater was improved to $0.32{\sim}0.59BOD/COD_{Cr}$ of the coagulated wastewater from $0.29{\sim}0.43BOD/COD_{Cr}$ of the raw dye wastewater. The final effluent concentrations were BOD of 8 mg/L, $COD_{Cr}$ of 43 mg/L, $COD_{Mn}$ of 18 mg/L, T-N of 8 mg/L, and T-P of 1.3 mg/L, respectively. Color was removed from 1655 to 468 unit by coagulation and then to 123 unit by MLE process. The HPLC analysis of aromatic amines in wastewater showed that decolorization was achieved by cometabolism while aromatic amines were produced by cleavage of azo bonds under anaerobic conditions and these products were removed in an aerobic tank subsequently. Nitrification rates of attached and suspended microorganisms were evaluated comparatively and the acclimating conditions of bacteria on media were validated by the scanning electron microscope.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.274-283
• /
• 2011

Effect of pH on ozone oxidation and peroxone AOP(Advanced Oxidation Process) process was analyzed and the optimal efficiency for both processes was obtained at pH 7.5. In case of ozone oxidation process, the efficiencies of color, $COD_{Mn}$ and $BOD_5$ removal were measured to 93%, 70% and 89% at a reaction time of 50 min(ozone dosage of 111.67mg/$\ell$). When reaction time increased to 90 min(ozone dosage of 201mg/$\ell$), the efficiencies of color, $COD_{Mn}$ and $BOD_5$ removal were increased by 3~5 %, indicating that the increment of removal efficiency was insignificant considering longer reaction time. Similarly, the ozone/$H_2O_2$ ratio was optimized to 0.5 for peroxone AOP process. Removal efficiencies of color, $COD_{Mn}$ and $BOD_5$ were measured 95%, 81% and 94% at a reaction time of 50 min(ozone dosage of 111.67mg/$\ell$). When reaction time increased to 90min(ozone dosage of 201mg/$\ell$), the removal efficiency of color, CODMn, and BOD5 increased slightly by 1~5%.

• 조명전기설비학회논문지
• /
• 제22권8호
• /
• pp.75-81
• /
• 2008

본 논문은 플라즈마를 이용한 수처리 연구를 수행하였다. 이 연구에 사용한 수중플라즈마 토치는 상당한 전력의 절감을 가져올 수 있기 때문에 경제적인측면과 에너지효율면에서 뛰어난 결과를 나타내었다. 수중에서 일어나는 스트리머방전과 아크방전 현상을 면밀히 조사하여 비교하였고, 또한 염색페수를 플라즈마로 처리하였을 시의 색도제거율과 용존오존, 과산화수소와의 상관관계를 알기위해 표본화하고 분석하였다. 이에 플라즈마토치에는 선택적인 산화반응이 다소 있긴 하지만, 플라즈마화학반응에 의한 $H_2O_2$와 $O_3$의 성장이 아크방전 보다 스트리머방전시 더 효과적으로 촉진된다는 것을 알 수 있었다. 따라서 스트리머방전이 아크플라즈마 토치에 비해 더 효율적인 플라즈마 화학반응을 일으킬 수 있는 환경을 만들어주므로, 수처리에 있어서 스트리머플라즈마토치가 더 적합하였다.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.392-400
• /
• 2004

This research uses the $TiO_2$/UV process to verify the most suitable condition and possibility to dispose dyeing wastewater that contains pigment and a large amount of pollutants. For this, this research has enforced experiments that compare photo adsorption, photolysis, and photo catalyst oxidation reaction, and also evaluated and analyzed the change of pH and $TiO_2$ dosage, irradiation rates of ultraviolet rays and the dosage change and injection method of $H_2O_2$. According to the results of the dyeing wastewater experiment of storehouse catalyst that uses the new form of $TiO_2$, the photo catalyst oxidation reaction proved to be more effective than photo adsorption and photolysis; 35%, 21% in the case of $TCOD_{cr}$ and 39%, 28% in the case of chromaticity. Taking into consideration the reaction time, amount of photo catalyst reaction and irradiation amount of ultraviolet rays, the decomposition efficiency of pH change proved to be most effective at pH 4. On the whole, the acidity area proved to be effective in dyeing water exclusion than neutral and alkalinity areas. Having evaluated the influence of $TiO_2$ dosage, not only does the decomposition efficiency continuously improve as the $TiO_2$ dosage increases but the shielding effect does not occur also when the $TiO_2$ is at a fixed state. The influence of ultraviolet irradiation amount concluded in the result that as the ultraviolet irradiation amount increases the decomposition efficiency continually increased, but in the case of chromaticity when the irradiation amount was higher than 37.8mW/cm2 the removal efficiency is slowed remarkably. The influence of $H_2O_2$ dosage evaluation reached the results that although the decomposition efficiency increases with the increase of $H_2O_2$ dosage, when above 150mg (total dosage: 1200mg) $H_2O_2$ consumes OH radical itself and reduces the decomposition efficiency. Also in the case of the $H_2O_2$ injection method rather than injecting in the whole amount of $H_2O_2$ (1200mg) needed at the beginning all at once, injecting divided quantities of $H_2O_2$ whenever the electric current density falls below 10mgfl reduces the wases of OH radical due to an excess of $H_2O_2$ and in tum heightens the decomposition efficiency.

• 한국물환경학회지
• /
• 제29권1호
• /
• pp.74-80
• /
• 2013

본 연구에서는 오존과 오존/과산화수소 공정을 단독공정과 연속공정으로 각각 적용하여 피혁염색폐수의 색도 저감을 평가하였다. 오존 단독공정에서 색도 저감율은 65%였고, 오존 농도가 40 ~ 50 mg/L 이상으로 주입되면 오히려 색도가 증가하는 경향을 나타냈다. 반면에 오존/과산화수소 공정에서는 과산화수소 주입율을 오존 질량 대비 0.2와 0.3비율로 하였을 때, 색도의 증가 없이 완벽히 제거되었다. 비록 과산화수소의 주입이 색도 저감을 증가시키지만, 초기오존 소모량 구간에서는 과산화수소를 주입하여도 오존 단독 공정과 색도 저감율에서 큰 차이를 보이지 않았다. 결론적으로, 1단계에서 오존 단독공정으로 오존 소모량을 만족시켜주고 (30 ~ 40 mg/L), 그 이후에 과산화수소를 주입 하여 오존/과산화수소 연속 공정을 적용하는 것이 본 피혁 염색폐수의 색도 저감에 가장 효과적인 공정으로 평가되었다.