• 한국생활과학회지
• /
• 제19권4호
• /
• pp.699-707
• /
• 2010

Catechu is widely used as in natural dyeing as well as in various medicines and tannage. This study investigated the dyeing properties and functionality of Catechu through a series of dyeing experiments using cotton fabric. It was shown that the absorbance of Catechu solution has two peaks at 220nm and 280nm. Thus, it can be concluded that the color constituent of Catechu is a catechol tannin and color tone is YR. The dyeability of Catechu increases as the concentration of the dye is increased. Its variation was shown to be similar to the isothermal absorption curve of the Freundlich. As dyeing time was increases, the dyeability did not change significantly after the 30 minute mark was passed. At high temperatures the dyeability was shown to increase. As the dyeing temperature was increased the color of dyeing fabrics changes from Y and YR to R. Experiments with pre-mordanting method showed that various colors can be obtained using Catechu. Cotton is effective in using K, Cu, Fe mordants, and the dyeability was shown to be improved with low pH. Both washing fastness and light fastness were shown to be low. However, the fabric color gradually changed to red was due to mailard reaction of catechol tannin causing by repeated washing and sunlight. The ultraviolet-cut ability was improved for cotton fabric dyed with Catechu. Also, dyed fabric with Catechu showed very good antimicrobial abilities at 99.9%.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.406-413
• /
• 2009

전통 오방색 중 흑색 재현을 위하여 오배자, 신나무 잎, 감즙, 밤껍질, 묵즙 등을 이용하여 한지에 천연염색을 실시하였다. 흑색 염색을 위해 염료별 단독염색 및 복합염색을 행하였고, 매염제 및 염색순서를 달리하여 색상의 발현 특성을 조사하였다. 아울러 염료의 농도(o.w.f) 변화에 따른 염색 특성을 조사하여 흑색 발현을 위한 최적 염색조건을 구명하였다. 한지의 흑색 천연염색 발현에 있어 오배자가 가장 중요한 염료 물질로 나타났으며, 복합염색의 경우 오배자 염색 $\rightarrow$ 초산구리 매염 $\rightarrow$ 신나무 잎 염색 $\rightarrow$ 철 매염의 순서가 가장 우수한 흑색염색 특성을 나타냈다.

• 화훼연구
• /
• 제18권1호
• /
• pp.66-72
• /
• 2010

본 실험은 절화장미 중 만개시의 꽃의 크기, 밀집도, 개화 시 꽃의 모양, 꽃잎의 단아함, 염색 시 색발현 등이 양호한 'Akito' 품종을 대상으로 단색염색을 위한 최적조건을 규명하고자 실시하였다. 염료용액의 pH가 3.5, 염료의 온도가 $20-25^{\circ}C$일 때 염료의 착색과 흡수속도가 가장 빨랐으며 절화수명 또한 15일로 가장 길었다. 염색을 위한 꽃의 개화 정도는 꽃잎이 3장 이상 핀 상태인 2~3단계에서 Pantone color, 염색 후 꽃의 품질및 절화수명이 양호하였다. 염색액의 처리 시 실내온도는 $10^{\circ}C$의 비교적 저온에서 흡수가 양호하였다. 염색용액의 농도는 $10g{\cdot}L^{-1}$ 처리했을 때 가장 선명한 색상을 나타내었으며 염색액의 흡수를 촉진시키기 위한 전착제 처리는 $2mL{\cdot}L^{-1}$를 사용하는 것이 가장 적절한 것으로 판단된다.

• 화훼연구
• /
• 제19권2호
• /
• pp.110-114
• /
• 2011

본 실험은 절화장미 'Akito' 품종을 재료로 하여 4가지 색상(yellow, orange, purple, blue)을 동시에 염색하기 위한 최적 조건을 구명하고자 수행하였다. 염료용액의 pH를 3.5에서 9.0으로 처리하였을 경우, pH 가 3.5에서 4가지색 모두 흡수속도가 빨랐다. 꽃의 착색에서는 각 pH별 차이가 없었고 잎에서는 pH의 차이보다는 색상의 차이에 따라 purple과 blue에서 색 발현이 현저하였다. 염료 별 농도처리에서 $10g{\cdot}L^{-1}$ 농도에서 가장 선명한 색 발현이 되었으나 유의성은 없었고 염색의 종류에 따라 유의차를 보였다. 염색에 미치는 처리시간은 10분 후에 파스텔 색상이 발현되었고, 30분 후에는 꽃의 색상이 가장 선명하였지만 동시에 잎에서도 착색이 진행되었다. 이상의 결과로부터 절화 장미 'Akito'의 염색 시 pH 3.5, 염색농도 $5-10g{\cdot}L^{-1}$, 처리시간 10-30분간 처리가 화색의 발현 및 품질의 완성도를 높이는데 적당하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권3호
• /
• pp.70-78
• /
• 2007

본 연구는 치자나무, 홍화, 오배자, 지치(지초), 소목 및 밤송이 등으로부터 추출한 천연염료를 이용하여 밤나무재를 염색할 때 나타나는 목재 표면의 색상 변화를 정량적으로 분석하여 효과적인 천연염색법을 검토하였다. 목재 시편은 염액의 온도, pH, 침지시간, 반복처리 횟수 등과 같은 다양한 처리조건을 적용하여 다채로운 색을 발현시겼고, 천연염색된 시편의 색상을 정량적으로 측정하기 위하여 $L^*$, $a^*$ 및 $b^*$ 값을 측정하여 채도와 염착농도를 산출해 내었다. 도막처리법은 천연염색 시에 많은 시간을 필요로 하는 침지 처리에 비해서 더욱 경제적인 처리법이라는 것을 확인할 수 있었다. 또한 착색력이 낮은 도막처리법은 반복적인 도막 처리를 통하여 원하는 색상을 얻을 수 있었으며 색상의 농담도 쉽게 표현할 수 있었다. 천연염색 처리 결과 염액의 온도가 높으며 약산성 염료(pH4의 수준)를 사용함으로써 우수한 착색효과를 얻을 수 있었다.

• 한국의류학회지
• /
• 제28권7호
• /
• pp.882-891
• /
• 2004

The purpose of this study was to improve dye effect and method in order to facilitate the use of persimmon juice dyeing. Silk fabrics were pad-dyed to 100% pick-up using padding machine after dipping in persimmon juice extracted from unripe persimmons indigenous to Jeju. The color of dyed silk fabrics by padding method was more even and repeatable than that by traditional hand method. Persimmon juice concentrations were 4 types 10, 25, 50 and 100%. The silk fabrics were pad-dyed to 100% pick-up and were repeatedly dyed two times and three times with 100% concentration. The higher the concentration, the more color deepened. UV Irradiation instead of sunlight was applied to color developing. Irradiation times were shortened to 1-8hrs. Color values which reguired 30-50 hrs. in sunlight irradiation. were obtained in 3-5 hrs. with UV irradiation. Tensile strengths of silk fabrics in UV irradiation decreased but not decreased in sunlight irradiation. Elongations of silk fabrics in sunlight irradiation increased but decreased in W irradiation. Drape stiffness increased up to three times.

• 한국염색가공학회지
• /
• 제34권3호
• /
• pp.173-184
• /
• 2022

In this study, the TPU film was laminated on an aramid fabric or circular knits in order to implement an air cushion material that can respond to high impact forces in case of a fall and is easy to expand. To increase the bonding strength between the fabric layer and the film layer, a primer layer was formed in two ways: one for thermally bonding and laminating PET film and two for coating and aging hot melt type PUR adhesive. The tensile strength of the aramid air cushion was 2.5 times higher than that of the circular knits, but the tensile elongation of the aramid air cushion was very low compared to that of the circular knits. The tear strength of the aramid air cushion was about twice or more superior to that of the circular knits, the primer treatment method was good at A, and the peel strength was excellent at method A. The aramid air cushion was the lightest in weight. Summarizing the above results, it was best to combine the air cushion material with aramid woven fabric and primer treatment method A to cope with the high impact force applied when falling.

• 한국의류학회지
• /
• 제33권7호
• /
• pp.1121-1127
• /
• 2009

This study presents an eco-friendly and one-step finishing method for modifying fiber property that reduces fiber damage in wool/polyester blend fabrics. Lipase from aspergillus oryzae is used in this experiment. The enzymatic treatment condition is optimized by measuring the relative activity of lipase depending on pH level, temperature, concentration of lipase, and treatment time. The concentration of $CaCl_2$as an activator is determined by the characteristics including whiteness, water contact angle (WCA), and dyeing property. The modified properties of lipase treated fabrics are tested for pill resistance and surface morphology. The results are described as follows: the optimum condions for lipase treatment constitute a pH level of 8.0, treatment temperature of 40$^{\circ}$$_C$, concentration of lipase at 100% (o.w.f), and a treatment time of 90 minutes. $CaCl_2$helps in raising lipase activation, and the optimum concentration is 50mM. The whiteness, wet ability, and pill resistance of lipase treated fabrics improves as compared to the control. The dyeing property of lipase treated fabrics improved by 53.5% after using the one-bath dyeing method. This means that lipase treatment can save time and cost during the dyeing process since lipase treatment modifies wool and polyester fibers. The surface of lipase treated wool fibers do not exhibit any change, however voids and cracks manifest on the surface of lipase treated polyester fibers.

• 한국지역사회생활과학회지
• /
• 제23권3호
• /
• pp.317-328
• /
• 2012

In this study, printing was introduced to the common dip-dyeing method of persimmon juice dyeing so as to develop two different colored persimmon juice dyed fabrics with printings of 'jorangmal' patterns (a national monument) instead of producing a plain textile. Following are the results of a comparative study between the persimmon dyed fabric and undyed fabric, both with printings, in terms of its properties, and hand values. Cotton and rayon were chosen as samples and were compared separately. Firstly, the samples showed differences in terms of clarity and visual sensation depending on the presence of persimmon dye, even if the same pattern and color was used. Secondly, the air permeability of two samples improved after persimmon dyeing even though their thickness increased, and their moisture regain increased as well in all humidity conditions. Thirdly, protectiveness against UV increased in dyed samples, and sweat, sunlight, and compound colorfastness improved in printed dye-fabrics compared to plain dyed ones. Therefore, printing proved to be effective in preventing discoloration. Fourthly, tensile linearity and resilience, bending rigidity, compressive linearity and resilience, and shearing stiffness increased more in the dyed samples compared to undyed ones. However, shearing recovery decreased in both dyed fabrics. Fifthly, the result of its hand value showed that Koshi value increased in all samples than undyed ones, whereas Fukurami, Numeri, and Softosa values decreased. Incorporating printing in persimmon dyeing process could expect creative outcomes not only in today's diverse fashion but in areas of arts or crafts as well.

• 한국염색가공학회지
• /
• 제1권1호
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.