• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.194-206
• /
• 2010

This study was carried out to identify the optimum dyeing conditions for maximum dye uptake of Prunus yedoensis Matsumura flower extract on silk fabric and to investigate hue/tone characteristics and fastness properties of the dyed fabrics. As results, the flower extract was found to contain flavonoids by FT-IR and to show yellowish shade by UV-vis spectrum. Silk fabric was optimized for maximum dye uptake to five repetitions of dyeing at $80^{\circ}C$ for 60 min with an extract concentration of 600% owf in terms of both K/S and color differences. Pre-mordanting was more effective to dye uptake than post-mordanting for all of the mordants used. Un-mordanted and pre-mordanted fabric showed YR(Yellow Red) while most of post-mordanted ones did Y(Yellow). Main tones of dyed fabrics were sf(soft) and lt(light) in the case of unmordanting or Al-mordanting whereas they were d(dull) and g(grayish) by post-mordanting with Cu, Cr, and Fe, respectively. The fastness grades to rub and dry cleaning were reasonably good for most dyeing conditions while those to light were poor. Finally dyeing condition for each hue/tone of the dyed silk with the flower extract was optimized considering fastness properties.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.84.1-84.1
• /
• 2005

• Journal of the Korean Society of Costume
• /
• v.28
• /
• pp.205-212
• /
• 1996

This paper is to study the characteristics of fabrics dyed with astringent unripe persimmon juice. The cotton silk rayon and nylon fabrics were dyed with astringet unripe persimmon juice. The structures of natural fabrics dyed fabrics and dyed fabrics followed by washing were examined by scanning electron mi-croscopy. Surface reflexibility of VIS trans-mittance of UV VIS and NIR were analyzed. The study conclues as follows: 1. Colour of cotton fabrics dyed with persim-mon juice became darkended as a function of exposing time to sunlight. That colour was chaged after washing. 2. Blocking effect of ultraciolet light and visible ray was increased in all dyed fabrics. Especially dyed cotton fabric blocked UV light perfectly and the blocking effect was still remained after 9 washings. 3. Persimmon juice dyeing produced coating effect to fabrics besides dyeing effect accord-ing to the scanning electron micrographs. In a word the cotton fabric dyed with per-simmon juice has blocking effect of UV light stiffness. Therefore I think persimmon juice dyeing is a very useful textile finishing and ex-pect a wide application of the technique in fu-ture.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.90-98
• /
• 2006

The purpose of this study was to estimate natural dyeing properties of Korean traditional paper (Hanji). Korean traditional paper, which made from bleached bast fiber pulp of Broussonetia kazinoki was used as base paper. As dyestuffs, hot water extractives of Phellodendron amurense bark, Rosa multiflora leaf and stalk, and Rubia cordifolia root and methanol extractives of Lithospermum erytrorhizon root were used. $Al_2(SO_4)_3$ and $Fe(OH)(CH_3COO)_2$ 0.5% solution were used as mordant. Soybean juice (10%), chitosan (0.1%), and skim milk (2%) solutions were used as auxiliary dyeing agents. Accelerated aging treatments of natural dyed Korean traditional papers were undergone at following conditions: exposure temperature, $80^{\circ}C$ relative humidity, 60%; wavelength, 340 nm; UV irradiance, $0.67W/m^2/nm$ exposure time, 24, 48, and 72 hours. Colors, color difference, and color fastness were examined for estimation of natural dyeing characteristics. The auxiliary dyeing agents treated Korean traditional papers were more superior the dyeing effectiveness about dyestuffs than untreated Korean traditional papers. The dyeing effectiveness of soybean juice treated Korean traditional paper was superior to the others. The color fastness of Korean traditional paper, which was dyed with Rubia cordifolia root extractives, was most inferior to the others.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.101-109
• /
• 2010

The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.

• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.303-308
• /
• 2007

Three types dyeing wastewater (dark, medium, light color) discharged from cotton textile dyeing with reactive dye was collected at each step of process. Each process dying wastewater was analyzed and treated by ionized gas. The analysis focused on $COD_{Cr}$, SS and color. Bleaching & scouring process wastewater has the highest $COD_{Cr}$ value in the three type dyeing wastewater. SS shows the highest value at dyeing process wastewater in dark and medium color but light color has at finishing process wastewater. The result of process wastewater treatment by ionized gas was that the ionized gas was effective in $COD_{Cr}$ removing of bleaching & scouring process and finishing process wastewater but was not good at dyeing process wastewater. From that result it is estimated that the ionized gas could not work in opening the aromatic ring and react only in aliphatic component of the molecule. Because the surfactants contained in bleaching & scouring process and finishing process wastewater have only one aromatic ring in its molecular structure, in contrast with the reactive dye compounds consist of aromatic rings great part of its molecular structure. The color almost removed in 1.5 hrs reaction time but $COD_{Cr}$ removal effiency was only 30.7% through 3hrs in 1500 mL of total dyeing wastewater treated by 10 L/min ionized gas.

• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.83-100
• /
• 2003

It has been known that the chitosan pre-treated fabrics can be dyed without the aid of mordanting process. It is due to the fact that chitosan treatment increases the dye uptake. However, the effect of chitosan on the dyeing mechanism has not been elucidated thus far. Following explanations have been presented regrading the action of the chitosan on the dyeing mechanisms: 1. Chitosan absorbs dyestuffs and facilitates dyeing since the chitosan itself has a good affinity toward dyestuffs. 2. Chitosan acts as a metallic mordant between the fiber molecule and dyestuff. 3. Fiber molecules and chitosan form a coordinate covalent bond. This study aims the quantitative investigation on the effect of the chitosan and the effect of sequence of the mordanting, pre-mordanting or post-mordanting, on the dyeing of the fabrics. Cotton fabrics and acylic fabrics were pre-treated with chitosan before dyeing with cochineal dyestuffs. Method 1: Fabrics were, firstly, mordanted with Al, Sn, Cu, and Fe; mordanted fabrics were, secondly, treated with chitosan; mordanted and chitosan-treated fabrics were, thirdly, dyed. Method 2: Fabrics were, firstly, treated with chitosan; chitosan-treated fabrics were, secondly, mordanted with Al, Sn, Cu, and Fe; these were dyed then. Method 2 gave distinguished specific color development with darker shade. Apart from this, chitosan-treated fabrics yielded darker shade compared to the pre-mordanted fabrics without chitosan-treatment.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.48-64
• /
• 2019

With evolution in the production environment of the textile industry, the need for non-water-based dyeing technologies and eco-friendly process facilities in the dyeing and processing stages has increased. In recent years, supercritical fluid dyes have been developed and commercialized in Europe, centering on this demand. However, so far, such dyes have been mainly applied in the processing of PET fibers. Basic research has mainly involved investigation of dyeing by supercritical carbon dioxide or solubility of such dyes, and more in-depth research should be continuously carried out. In this review, we describe the types and characteristics of supercritical fluids that exhibit specific properties at pressures and temperatures over the critical point. In addition, the state of the art in the dyeing and processing technology using supercritical fluids and associated, processing problems, environmental regulation, and wastewater treatment issues are described in detail. We hope this review can contribute to the supercritical fluid technology being further developed as an environment friendly dyeing processing method. Furthermore, we expect that the technique can be used as a means of ensuring different, high-quality dyed products.

• Fashion & Textile Research Journal
• /
• v.6 no.2
• /
• pp.245-248
• /
• 2004

This study examied ned physical properties and surface characteristics of papers post-processed by Jumchi technique and stainability of extract from Amur Cork-Tree to use Dakji as clothing material. Then, it found the following results. After-treatment by Amorphophalus konjac K. Koch and persimmon juice showed stronger tensile strength and tearing strength than untreated samples and the drape stiffness was substantially increased. After-treatment by persimmon juice generated dyeing effects as well as excellent tensile strength and tearing strength all samples were generally dyed well by Amur Cork-Tree, While the untreated samples did not show any significant effects in dyeing for more than 5 minutes. It was found that after-treatment substantially contributed on concentration of dyeing as dyeing amounts of post-processed samples were gradually increased as time increased. After-treated sample with agar did not show any significant differences from untreated sample. Accordingly, it has to be studied further.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.803-809
• /
• 2004

In order to activate the characteristics of charcoal in fiber systems, this was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on cotton fabrics. The results obtained were as follows; The fabrics were dyed with gray colors by charcoal. The K/S values, that were indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Also it was confirmed the morphology of the fiber surfaces adsorbed with the particle size from two micrometers to four micrometers of charcoal powder by scanning electronmicronscope. The cotton fabrics dyed by charcoals generally recorded 3-4 degree of wash fastness, 4-5 degree of dry-cleaning fastness, 4-5 degree acidic and alkaline perspirations and water fastness. In connection with the functional properties, cotton fabrics dyed with charcoal appeared that antibacterial, deodorization, far infrared emissivity were improved. Especially the deodorization was improved greatly by using charcoal.