• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.318-322
• /
• 2019

In shooting training, an impact point identification system that uses the impact wave of the bullet to check the impact point in the target plate has been recently used. Acoustic sensors used in these systems must be able to detect shock waves of high sound pressure levels and be both waterproof and dustproof for rainy weather and dusty environments, respectively. In this study, membranes with excellent waterproof, dustproof, and sound transmitting characteristics were selected through a characteristics test; a protection cap was installed to install the selected materials. After coupling the produced protection cap to the acoustic sensor housing, the sensitivity and phase characteristics of the acoustic sensor were checked. Through the waterproof and dustproof test, the performances of its sensitivity and phase characteristics were confirmed. Finally, the normal shockwave of a 5.56 mm diameter bullet was measured using a shockwave detection signal collecting plate equipped with a prototype of the acoustic sensor at a 100 m firing range.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1227-1228
• /
• 2011

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.133-140
• /
• 2000

This study was carried out to determine a suitable mixing rate to utilize the PDF as a bedding materials at the pigpens and investigate the effect of substitute processed dustproof fly-ash(PDF) on the odor. In proportion to the increase of substitute rate of the PDF, the utilizable period was extended, and there was a little change of the moisture in the bedding materials. At all the treatment of PDF, there was the significant effect on the maggots and parasites but it didn\`t hinder in the biodegradation. According to highly mixing rate, PDF decreased in the noxious gas ($NH_3$ and $H_2$S) emission. In conclusion, the mixing rate of 30% or above this substituted level will increase replacement terms, and reduce the sawdust cost and the pollutions of breed pigs.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.283-284
• /
• 2007

• Journal of Korean Society for Quality Management
• /
• v.46 no.2
• /
• pp.301-310
• /
• 2018

Purpose: The purpose of this study is to investigate the effect of work intensity on fit factor and affective quality of the dustproof Background: Among the victims who suffer pneumoconiosis due to the inhalation of toxic substances or the lack of oxygen during the work, the proportion of the victims is larger than the other causes. Wearing a respirator may prevent pneumoconiosis, but it can be hazardous to workers because of the leakage through filters, cartridges, exhaust valves, broken parts, and face-to-face contact. Despite leakage through the contact area between the mask and the face has various causes such as the wearer's activity, sweat accumulation, facial shape, etc., There is a lack of relevant research and regulation compared to developed countries that have already institutionalized the law 30 years ago and give the right to sell through a test Method: The work intensity was adjusted by walking or running at 6km/h and 11km/h on the treadmill, and tasks were defined with reference to the test procedure and the exercise sequence applied in the face leakage test of the dustproof mask. And fit factor was measured objectively using 'Respirator Fit Tester 8038' which measures fit factor calculated by dividing the number of dust present outside the mask by inside the mask. In addition, affective quality was classified by the ease of use, ease of breathing, and ease of wearing, and was measured using the 5-point likert scale questionnaire. Results: There was a significant difference in fit factor, ease of breathing, and wearing convenience according to work intensity and no significant difference in ease of use(${\alpha}=0.01$). And when the work intensity was high, fit factor, ease of breathing, and wearing convenience were all lower than when the work intensity was low. Conclusion: In Korea, it is necessary to consider consideration of the work intensity when testing the leakage rate of the face part for safety certification of the respiratory protective equipment, When developing a mask, it should be possible to maintain high adhesion even under intense, active situation and high temperature conditions by selecting materials, improving the wearing style, and expanding the adjustable range.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1339-1343
• /
• 2004

This paper presents a development of the control algorithm and Pick & Placer. The Pick & Placer provides a powerful multi-task system that includes both graphical and remote interface. Users can easily set up sorting parameters and record important data including wafer number, data, and operator information. This System sets up a dustproof device and massively machined components to provide an extremely stable sorting environment. Precise resolution and accuracy result from using machine vision, a pneumatic slide drive and close -looped positioning.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.84-86
• /
• 2001

본 논문에서는 고성능 활성탄의 악취 및 유해가스 흡착효율과 멜트브로운(M/B)부직포의 여과성능에 의한 복합적인 고기능 방진특성을 갖는 활성탄 부착 M/B 국산화 여과재를 제조개발하였다. 고성능 활성탄은 고순도의 일반활성탄에 금속염, 유기물 등을 담지시켜 활성화시킨 활성탄이고, M/B여과재의 웹(web)제조조건은 M/B 방사기에서 방사온도 250℃, 방사속도 150m/sec, 고온공기온도 250℃ 그리고 DCD(die to collector distance) 20cm가 적합함을 알 수 있었다. 또한 M/B 여과재에 활성탄 부착은 열롤러시스템에 의한 열적결합방법을 이용하여 균일한 분포의 점접착결합구조를 갖도록 하였고, 개발된 복합기능 여과재가 방진마스크용 여과재로의 이용이 가능하다는 것을 분진포집효율, 투과율, 흡기저항 등 여과재 성능기준실험 결과를 통해 확인하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.93-102
• /
• 2024

We introduce a novel outdoor linear LED luminaire enhanced with Gore-Tex filters, designed to overcome the challenges of moisture and thermal management in harsh environments. This luminaire integrates expanded polytetrafluoroethylene (ePTFE)-commercially known as Gore-Tex-achieving superior waterproofing and dustproof qualities while maintaining breathability to prevent internal condensation. The design process, from conceptualization through prototyping and testing, is detailed, highlighting the luminaire's improved durability and stability under varying conditions. Experimental results demonstrate that our design significantly extends the operational lifespan and reliability of outdoor LED lighting systems by mitigating thermal and moisture-related degradation. This study not only advances ePTFE's application in lighting technologies but also offers a scalable model for enhancing the performance of LED luminaires in outdoor settings.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.6
• /
• pp.264-270
• /
• 2020

Design was developed through user-oriented service design methodology and survey was conducted on material selection criteria for prototype production to select CFRP (Carbon Fiber Reinforced Plastics) CNT (Carbon Nano Tube), which was applied to animal X-ray detector panel to design product and develop prototype. Completed prototype with the application of CFRP CNT panel was tested in drop test, frontal external pressure test, and dustproof/waterproof performance to confirm that it can be utilized as a portable animal X-ray detector used in outdoor environment.

• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.41-47
• /
• 2012

As a core process in the manufacture of state-of-the-art industrial technologies such as semiconductor and LCD, a clean room is the most important process which can affect the performance and quality of products drastically. Nevertheless, scientific research on comprehensive safety measures from a fire protection standpoint is not being carried out in Korea. This study aims to derive measures to improve smoke control systems by identifying performance and problems of smoke systems installed in clean rooms as an LCD manufacturing process and analyzing fire and evacuation simulations considering several scenarios. As a result of analysis of fires and smoke in a clean roomas an LCD manufacturing process, it is found to be necessary to stop air handling units through interlocking in case of a fire and exhaust smoke out of the room through the top of FAB in consideration of buoyancy of smoke. It is also found to be necessary to install quick response sprinkler heads and accessories to accelerate the response time, because the heat-accumulating performance of sprinkler heads decreases in this application. Despite its low density of dwelling due to the automation process, clean room is characterized by an array of complex production equipment and working environment requiring dustproof clothes, which makes it difficult to acquire evacuation safety performance. Thus, thorough control of danger factors in processes and periodic education and training are required. It is also necessary to establish a level of domestic technologies equivalent to the level of standards of advanced countries in fire protection.