• Atmosphere
• /
• v.24 no.3
• /
• pp.391-402
• /
• 2014

This study investigated the performances of precipitable water vapor (PWV) retrieval from the sets of ground global positioning system (GPS) signals, each of which had different length of observing-session duration, for the purpose of obtaining as short session duration as possible that is required at the least for appropriate retrieval of the PWV for meteorological usage. The shorter duration is highly desirable to make the most use of the GPS instrument on board the mobile observation vehicle making measurements place by place. First, using Bernese 5.0 software the PWV retrieval was conducted with the data sets of GPS signals archived continuously in 30 seconds interval during 2-month period of January and February, 2012 at Bukgangneung site. Each of the PWVs produced independently using different session durations was compared to that of radio-sonde launched at the same GPS location, a Bukgangneung site. Second, the same procedure was done using the data sets obtained from the mobile observation vehicle that was operating at Boseong area in Jeonnam province during Changma observation campaign in 2013, and the results were compared to that at Bukgangneung site. The results showed that as the observing-session duration increased the retrieval errors decreased with the dramatic change happening between 3 and 4 hours of the duration. On average, the root mean square error (RMSE) of the retrieved PWV was around 1 mm for the durations of greater than 4 hours. The results at both the Bukgangneung (fixed site) and Boseong (mobile vehicle) seemed to be fairly comparable with each other. From this study it is believed that at least 4 hours of observing-session duration is needed for the retrieval of PWV from the ground GPS for meteorological usage using Bernese 5.0 software.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.1
• /
• pp.176-187
• /
• 2001

Most bridges have expansion joints to accommodate thermal expansion and contraction without inducing large forces in the bridges. To evaluate the effects of earthquake-induced at expansion joints of concrete bridges, the first part of this paper deals with a collinear impact between concrete segments, which have the same cross section but different lengths. Especially, impact force, momentum, strain energy and kinetic energy are formulated in mathematically. These results are then used in the second part of this paper to simulate a realistic yet simple analysis of seismic pounding in concrete bridges. Analysis of seismic pounding in idealized concrete bridges is carried out by using a simple lumped-mass model and rationally determined values of the coefficient of restitution and the duration of impact.

• Structural Engineering and Mechanics
• /
• v.9 no.1
• /
• pp.69-88
• /
• 2000

A relatively simple model of a buried structure response to a surface loading that can simulate a possible opening and closure of a gap between the soil and the structure is presented. Analysis of the response of small and medium scale buried roof slabs under surface impulsive loading shows that the model's predictions are in fairly good agreement with the experimental results. Application of the model to a study case shows the relative influence of system parameters such as, the depth of burial, the arching coefficient, and the roof thickness, on the interface pressure and on the roof displacement. This model demonstrates the effect of a gap between the structure and the soil. The relative importance of including a gap opening and closure in the analysis is examined by the application of the model to a study case. This study results show that the deeper the depth of burial, the longer the gap duration, and the shorter the duration of the initial interface impact, while the higher the soil's shear resistance, the higher the gap duration, and the shorter the initial interface impact duration.

• Communications for Statistical Applications and Methods
• /
• v.16 no.1
• /
• pp.21-29
• /
• 2009

Engle and Russell (1998) proposed the ACD(Autoregressive Conditional Duration) model to explain the relationship between the prices and the duration times of the stocks. In this paper, we first introduce the various types of the ACD models such as the linear ACD, log ACD and Box-Cox ACD models and we evaluate the performance of the models for analysing the transaction data of the stocks in Korea.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2008

The present study was carried out with the aim to evaluate the viability of layings (delivery of fertilized and unfertilized eggs) with egg laying duration of elite bivoltine races. The temporal aspect of mating in terms of egg layings duration may also have impact on the number of eggs laid, pattern of egg laying and their viability. After different interval of egg laying duration, moth of Bombyx mori are removed from oviposition site after they have completed egg laying. Present investigation confirmed that there are no significant difference in relation to the occurrence of viable (fertilized) and non viable (unfertilized) eggs and duration of oviposition. Percentage of unfertilized eggs varied from 2.41 to 3.42% in case of CSR-3, 2.59 to 3.62% in case of CSR-6, 2.82 to 3.66% in case of CSR-16 and 2.58 to 3.40% in case of CSR-17 in different treatments. The occurrence of unfertilized eggs are also not significant in the different treatments specially in those eggs which were laid 24 hours after oviposition and kept for 4 months hibernation schedule.

• Journal of Nutrition and Health
• /
• v.40 no.6
• /
• pp.509-516
• /
• 2007

The purpose of this study was to investigate the impact DM duration on cardiovascular disease risk factors in Korean Type 2 diabetes mellitus patients. The subject were 250 (male: 134, female: 118) Korean Type 2 DM patients recruited from a general hospital's DM clinic. Anthropometric and hematological variables and dietary intake were assessed. The subject's mean age was 60.2 years and duration of diabetes was 9.5 years. As far as DM duration was concerned, male subjects with long duration (${\geq}$ 5 years and longer) showed significantly lower weight, fat free mass, skeletal muscle mass, BMI (p < 0.05) and higher 2hrs-postprandial plasma glucose (p < 0.05) and concentration of Hemoglobin A1c (p < 0.01) compared to those with less 5years of duration. In female subjects, same trend was found. Female subjects with long duration (${\geq}$ 5 years and longer) showed significantly higher fat free mass (p < 0.05) and skeletal muscle mass (p < 0.05), Hemoglobin A1c (p < 0.01), HDL-cholesterol (p < 0.01) and triglyceride (p < 0.05), dietary intakes of protein (p < 0.05) and fat (p < 0.05) compared to those with less 5years of duration. In conclusion, Type II DM patients of long duration had higher blood lipid concentrations and higher carbohydrates intakes. Subjects followed diet prescription strictly showed lower blood lipid concentration, suggesting the effectiveness of diet to manage Type 2 DM patients.

• Journal of Environmental Impact Assessment
• /
• v.20 no.1
• /
• pp.71-78
• /
• 2011

This paper aims to assessing impact of reduction of non-point source pollution in the Bokha Stream watershed. The BASINS/HSPF model was calibrated and verified for water flow and water qualities using Total Maximum Daily Load 8days data from 2006 to 2007. Accuracy of the BASINS/HSPF models in simulating hydrology and water quality was compared and there were somewhat differences of statistical results, but water flow and water quality were simulated in good conditions over the study period. The applicability of models was tested to evaluate non-point source control scenarios to response hydrology and water quality in the Bokha stream using various measures which include BMPs approach and change of landuse. The evaluation of reduction of non-point source pollution was developed using load-duration curve. Despite strong reduction of non-point source, there are not satiated target quality at low flow season.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.187-197
• /
• 1996

An explicit direct time integration method based solution algorithm is presented to predict dynamic buckling response of Euler column. On the basis of large deflection beam theory, a plane frame finite element is formulated and implemented into the solution algorithm. The element formulation takes into account geometrical nonlinearity and overall buckling of steel structural frames. The solution algorithm employs the central difference method. Using the computer program developed by the author, dynamic instability behavior of Euler column under impact loading is investigated by considering the time variation of load, load magnitude, and load duration. The free vibration of Euler column caused by a short duration impact load is also studied. The validity and efficiency of the present formulation and solution algorithm are verified through illustrative numerical examples.

• Journal of Labour Economics
• /
• v.40 no.2
• /
• pp.69-87
• /
• 2017

This paper examined the impact of student loan on job search duration, explicitly considering the type of student loan. The data was collected from Korean Education & Employment Panel (KEEP) study released by KRIVET. The survival analysis shows the following two patterns. First, the students who used the student loan with guarantee tended to have longer job search duration of job search. Second, the students with the income contingent loan tended to have shorter job search duration to end up with lower wage.

• Journal of KSNVE
• /
• v.1 no.2
• /
• pp.115-120
• /
• 1991

The impact hammer is extensively used in experimental modal analysis as a means to provide force over a broad range of frequencies. The hammer mass and the impact head are often changed to achieve a desired impact time duration with its corresponding input frequency spectrum, these mass changes affect the performance and sensitivity of the force transducer employed to measure the impact force. Both a mathematical model describing the effects of impact head and hammer mass on the performance of the force transducer and experimental verification of this model are presented here.