• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1027-1032
• /
• 2013

LED는 저탄소 그린에너지 시대의 등기구로서 각광을 받고 있다. 다른 조명용 광원에 비해 친환경적이고 높은 에너지 효율을 가지고 있고 수명이 길다는 장점을 가지고 있지만, 공급전력 중 80%이상이 열에너지로 전환되며, 이에 따른 온도상승이 불가피 하여 높은 온도가 단점으로 꼽히고 있다. 온도상승은 LED소자의 수명에 영향을 미치기 때문에 방열시스템이 중요하게 자리 잡고 있다. 따라서 본 논문에서는 방열성능 향상을 위하여 LED 전구의 heat sink의 형상에 대한 열해석을 통하여 방열 시스템의 효용성을 분석하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제11권3호
• /
• pp.47-54
• /
• 2014

Clutches are an integral part of the automatic transmission for changing gears. Modern automatic transmissions make extensive use of wet multiple-disc clutches employing hydraulic actuation mechanism with electronic control. Although nowadays, highly advanced shifting algorithm implements the superior shift quality and transmission efficiency, its performance should be based on smooth, reliable engagement with a reasonably durable friction material as well as stable clutch piston dynamics. Particularly, clutch filling control is the crucial part of shifting process because only the open-loop control is available due to the lack of measurement. In this paper, the effect of clutch-fill control parameters on clutch piston dynamics is experimentally investigated by using clutch piston test equipment which enables the clutch piston to actuate similar to real shifting conditions. The experimental analysis results can be expected to be utilized for the calibration of proportional solenoid valve as reference current profile data in vehicle test.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권2호
• /
• pp.63-66
• /
• 2018

Lattice towers and tubular steel poles have been commonly used for electrical power transmission in Korea as well as the other countries. They are durable, structurally stable, simple and can easily be constructed in limited spaces. However, residents are opposed to construct transmission lattice towers in their areas because they are not visually attractive, and electrical field occur at the transmission lines. Underground transmissions have been used instead of the traditional towers to resolve these problems, however they are not cost effective to construct and run. Therefore, we have developed compact towers that are more attractive, well blend into the surrounding environment and much more economical than underground transmissions. This paper shows the design of a compact towers with insulation arm, in order to reduce the height of tower and the separation between phases. The compact tower can be installed in a narrow right-of-way. Insulation arms are easily applied to lattice and steel tubular towers instead of steel arms. Compact towers with insulation arm are also considered as a solution to have public acceptance or to create a familiar atmosphere among towers and people. Compact tower compared with a conventional tower, insulation arms reduces the width and height of the tower by 20% and 15% respectively.

• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.390-411
• /
• 2022

Any design engineer or coating formulator's primary objective is to protect metals. Large investments in terms of money, time, labour, and other resources are necessary for constructing large-scale machinery and structures. In terms of economy, the structure's lifespan should be as long as feasible to create revenue. It is becoming essential to protect metal substrates from corrosion to prolong the lifespan of such huge structures. One of the most exciting, durable, useful, and effective methods to protect metals from corrosion is the application of corrosion-resistant coating. Graphene is a novel material with a wide range of applications because of its extraordinary features. The use of graphene in coating creates an obstacle and complicates the path for corrosive medium to reach the metal. As the path to the metal elongates, the corrosion medium takes longer to reach the metal. Thus, metal corrosion can be avoided. In this paper, the importance of graphene in coating formulation is discussed, including chemical modifications of graphene, the effect of graphene concentration on corrosion inhibition, and the contact angle of coating. This review also highlights the significance of water-based corrosion-resistant coating for preventing environmental damage.

• Structural Engineering and Mechanics
• /
• 제84권1호
• /
• pp.63-76
• /
• 2022

Major engineering requirements and technological developments in the steel construction industry are discussed to support a new innovative system, namely corrugated web beams, for future structural projections. These new-generation steel beams, fabricated as welded plate girders with corrugated webs, are designed to combine large spans with very low weight. In the present study, the flexural capacity of optimally designed trapezoidal and sinusoidal corrugated web beams was aimed at. For this purpose, the new metaheuristic methods, specifically hunting search and firefly algorithms, were used for the minimum weight design of both beams according to the rules of Eurocode EN 1193 15 and DASt-Ri 015. In addition, the strengthening effects of the corrugation geometry at the web posts on the load capacity of fabricated steel beams were tested in a reaction frame. The experimental tests displayed that the lateral capacity of trapezoidal web beams is more durable under flexural loads compared to sinusoidal web beams. These thin-walled beams were also simulated using a 3-D finite element model with plane strain to validate test results and describe the effectiveness of the ABAQUS software.

• Structural Engineering and Mechanics
• /
• 제88권6호
• /
• pp.583-588
• /
• 2023

Total hip replacement is a crucial intervention for patients with fractured hips who face challenges in natural recovery. The design of durable prostheses requires a comprehensive understanding of the natural processes occurring in bone. This article focuses on static loading analysis, specifically during stumbling activity, aiming to enhance the longevity of prosthetic implants. Three distinct implants, Charnley, Osteal, and Thompson, were selected for a detailed study to determine the most appropriate model. The results revealed critical insights into the distribution of Von Mises stresses on the components of femoral arthroplasty, including the cement, implant, and cortical bone. Furthermore, the examination of shear stress within the cement emerged as a pivotal aspect for all three implants, playing a crucial role in evaluating the performance and durability of hip prostheses. The conclusions drawn from this study strongly suggest that the Thompson model stands out as the most suitable choice for hip joint implants.

• 유통과학연구
• /
• 제11권10호
• /
• pp.55-62
• /
• 2013

Purpose - The purpose of this study is to suggest a risk factor that significantly explains foreign currency risk premia. In recent years, some studies have found that the performance of the simultaneous consumption risk model improves considerably when tested on foreign currency portfolios, which are constructed based on the international interest rates differentials. However, this paper focuses on the long-run consumption risk factor. In our empirical research, we found that the real excess returns of high interest rate currency portfolios depreciate on average, when the future American long-run consumption growth rate appears low. This makes the high interest rate currency portfolios have relatively high risk premia. Meanwhile, the real excess returns of low interest rate currency portfolios appreciate on average, under the same conditions, which results in relatively low risk premia for these portfolios. Therefore, this long-run consumption risk factor might explain why low interest rate currencies do not appreciate as much as the interest rate differential, and why high interest rate currencies do not depreciate as much as the interest rate differential. Research design, data, methodology - In our explanation, we provide new evidence on the success of long-run consumption risks in currency risk premia by focusing on the long-run consumption risks borne by American representative investors. To uncover the hidden link between exchange rates and long-run consumption growth, we set the eight currency portfolios as our basic assets, which have been built based on the foreign interest rates of eighty countries. As these eight currency portfolios are rebalanced every year, the first group always contains the lowest interest rate currencies, and the last group contains the highest interest rate currencies. Against these basic eight currency portfolios, we estimate the long-run consumption risk model. We use recursive utility framework and the stochastic discount factor that depends on the present value of expected future consumption growth rates. We find that our model is optimized in the two-year period of constructing the durable consumption expectation factor. Our main results surprisingly surpass the performance of the existing benchmark simultaneous consumption model in terms of R², relatively risk aversion coefficient γ, and p-value of J-test. Results - The performance of our model is superior. R², relatively risk aversion coefficient γ, and p-value of J-test of our long-run durable consumption model are 90%, 93%, and 65.5%, respectively, while those of EZ-DCAPM are 87%, 113%, and 62.8%, respectively. Thus, we can speculate that the risk premia in foreign currency markets have been determined by the long-run consumption risk. Conclusions - The aggregate long-run consumption growth risk explains a large part of the average change in the real excess returns of foreign currency portfolios. The real excess returns of high interest rate currency portfolios depreciate on average when American long-run consumption growth rate is low, and the real excess returns of low interest rate currency portfolios appreciate under the same conditions. Thus, the low interest rate currency portfolios allow investors to hedge against aggregate long-run consumption growth risk.

• 복식
• /
• 제59권10호
• /
• pp.85-97
• /
• 2009

This study aims at applying Photoshop functions to digital make-up(DM) for aging effect based upon the knowledge of phrenology, comparing the result with that of the real or off-line make-up(OM) and identifying any possible difference between two methods: which contributes to understanding the potential and problems of DM at application level. This study aims at suggesting a method to apply computer graphics(CGs) to special effect make-up for aging effect through a case, contributing to attracting academic concerns and building theoretical frameworks for DM. It used 'Aging Process' in Adobe Photoshop CS4 Extended(CS4E) to change a young girl into a senior lady. In the process of DM, the study applies various tools and methods to making face wrinkled, finds the most effective way among them for each area of face, suggests a method to integrate the ways and shows the result of the method. Compared with OM, DM using CS4E is the less constrained work regarding procedure and time. Specifically, it can save the time tremendously because the reiterative operation of work can be omitted, when the same work is repeated, using 'Action' function which memorizes the history of the work. Once a DM work is produced, since it is durable, reusable and convertible to various images with additional operations, it seems very economical as well as highly promising to market the work through on-line sales. Regarding face features and skin, it reviewed literature in make-up and phrenology while it used Photoshop CS4 Extended tools to demonstrate a case of aging effect by combining and painting pictures of a young lady and a senior citizen.

• 복식
• /
• 제63권1호
• /
• pp.81-96
• /
• 2013

We interviewed and surveyed parents of 3 to 6-year-old boys in order to determine designs for indoor apparel that appealed to toddlers. In addition, on the basis of the behavioral characteristics of such boys, improvements in the development of indoor apparels were suggested. Parents preferred indoor apparels because it could be worn as underwear when the kid is outdoors and as outerwear when indoors. These apparels were popular with toddlers. Therefore, indoor apparel that gives the impression of outerwear while performing the function of underwear was designed. Underwear fabric was used, but outerwear apparel design was partially adopted. In order to improve the activity, fabric that could be stretched in any direction was used for the sleeves and pant legs, while organic fabric with soft texture was used for the trunk part of the apparel. Dark-colored material was used for the chest and elbow parts of the clothes in order to prevent contamination in these parts. In particular, a bib was used to prevent contamination in the chest part. Given that toddlers engage in many activities, the fabric needed to be durable, so this led to thick materials being used for the knee part. As certain parents complained about the short length for tops, we increased the length of the tops by 5cm. In the survey items that investigated overall wearability, ease, and suitability for toddlers' activities, the test apparel obtained a higher score than existing apparel did. This indicates that the overall suitability of the newly designed apparel was improved.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2581-2587
• /
• 2013

철도차량의 안전성을 위해 사용되는 윤축은 차량 전체 중량의 16%를 차지하는 요소로서, 철도차량의 경량화에 있어 필수적으로 연구되는 대상이다. 본 연구는 기존 윤축의 중량을 요구강도에 만족시킴과 경량화를 목적으로 창의적 문제해결이론인 TRIZ의 6SC를 적용하여 중공구조의 윤축 내부에 사용될 수 있는 캡을 설계하였고, 설계에 대한 검증을 위해 해석 툴인 ANSYS를 활용하였다. 본 연구에서 제안한 캡의 재질은 SM45C이며 중공구조이다. 또한, 윤축에 요구되는 강도를 만족하기 위해 중공 윤축의 베어링 시트 부 내부에 위치한다. 본 연구를 통해 설계 및 해석된 캡을 삽입한 윤축은 전동차의 윤축에 요구되는 기준을 만족하였으며 무게는 중실축과 비교하였을 때, 약 6.75%를 감소시켰다. 윤축 강도에 대한 평가 기준은 EN13103 및 EN13104의 규격을 적용하였다. 또한, 캡을 장착한 윤축의 최대응력 및 중량에 대해 기존의 중실축, 중공축과 비교함으로써 설계에 대한 효과를 검증하였다.