• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.614-617
• /
• 2006

This study investigates the quality control and the finishability improvement properties of durable marine concrete under construct in Geo-je Ka-duk fixed link project. Below $3.5\times10^{-12}m^2/s$ chloride migration coefficient and above 40MPa compressive strength are required for the caisson structure concrete. The quality control was performed from physical-chemical analysis of raw materials to concrete test. Also, the efficiency of vibration type and action interval were tested to remove the entrapped air on the faced to form. And kinds of form and remolding agent were also tested. This paper aim to enhance the practical use of high performance concrete to construction field.

• Journal of the Korean Applied Science and Technology
• /
• v.7 no.1
• /
• pp.87-91
• /
• 1990

1,3-Di(2-octadecanoyl)-2,7-dioxy-l,3,6,8-tetra aza cyclodecane [DDTC] was synthesized by reacting octadecanoic acid, 2,2'-di-aminodiethyl amine with urea. O/W type softner (STA) was prepared by blending DDTC and pentaerithritol monostearate with polyoxysthylene (20) oleyl ether, polyoxyethylene (10) castor oil, and PEG #1000-lauric acid ester. Treating STA to all cotton fabrics, the physical properties, such as tear strength, crease recovery, flexing abrasion resistance, and so on were measured. Resulting the measurements, STA was found to be durable softner with softness.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.65-73
• /
• 1995

1, 3-Di(dodecanoyl)-2, 7-dioxy-6, 8-di(2-hydroxyethyl)-1, 3, 6, 8-tetraazacyclodecane(DDDT) and pentaerythritol monostearate(PMS) were synthesized as a main component for softner. O/W type softner(DPSA) was prepared by blending DDDT and PMS with polyoxyethylene(10) castor oil, polyoxyethylene(20) oleyl ether, and polyoxyethylene(10) monolaurate. After treatment of DPSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DPSA was proved to be durable softner with good softness.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.4
• /
• pp.341-345
• /
• 2003

Organic acid salt of fatty polyamide (DDDT) and acrylate of fatty carbamide (DDTCA) were synthesized as a main component for the softener. O/W type non-ionic softener (NSC) was prepared by blending DDDT and DDTCA with beef tallow, lanolin anhydride. polyoxyethylene(7) stearyl ether, and polyoxyethylene(50) oleyl ether. After treatment of NSC to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, NSC was proved to be durable non-ionic softener with good softness.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.113-118
• /
• 2005

Small form factor optical disks for near-field optics using solid immersion lens were developed. Disk durability properties in terms of head-disk interface (HDI) properties were investigated by drag test, diamond like carbon film and lubricant film were coated on the small form factor disk to enhance HDI. Disks with glass substrates and lubricant films after heat treatment showed more durable characteristics. Coverlayers made of UV resin were uniformly coated by spin coating In which the ski-jump could not be formed by adopting outer ring technique.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.473-476
• /
• 2008

Due to the pursuit of high function and international price increase in the field of construction, the application of the secondary product using cement is on the increase gradually in the construction industry in the pursuit of economic cost reduction by the shortening of the construction time like Expediting and the dry construction method at the same time. However, it is in very urgent situation of measures to improve the structural performance or durable performance because it is limited for use in terms of panel in interior exterior building or functional repair reinforce as yet. Accordingly, this study is to investigate applicability of permanent Formwork like mould with the structural performance or excellent durable performance in the field of construction, and to derive optimum mixture in the performance and quality of manufacture. As a result of analysis comparison with the dynamic and durable properties of vacuum extrusion molding high toughness cement panel according to the mixture of four conditions, this study has found that the test body of mixing ECC-DP3 using small filler and large granulated blast furnace slag and powder flame retardant had excellent relative hardness and bending stress strain. The durable performance has shown excellent tendency by the decrease of porosity and enhancement of water-tightness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.7
• /
• pp.987-994
• /
• 2000

Cotton fabrics were finished with mixture of BTCA and silicone by pad-dry-cure process to achieve better mechanical properties than those of finished with BTCA alone. The changes of mechanical properties o( finished cotton fabrics were measured with by the KES-FB System and the hand values were calculated from the data of mechanical properties. With the durable press finish with BTCA tensile, bending, shear and compression properties increased. In hand values, Stiffness Crispness and Anti-Drape Stiffness increased, and Fullness & Softness decreased. Whereas silicone treatment reduced bending and shear properties and improved tensile and compressional resilience. Thus, Stiffness Crispness and Anti-Drape Stiffness decreased, and Fullness & Softness increased. These results indicated that BTCA treatment restricts fiber/yarn mobility in the fabric structure due to crosslinking, but silicone treatment reduces inter-fiber and inter-yarn frictional forces. Therefore, finish with mixture of BTCA and silicone provided cotton fabrics with a lower Stiffness, Crispness and Anti-Drape Stiffness and a higher Fullness & Softnesss than finish with BTCA alone.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.12
• /
• pp.111-118
• /
• 2007

Hydroforming is a cost-effective way of shaping malleable metals such as steel into lightweight, structurally stiff and strong pieces. With the increased use of the hydroformed components in automotive and aerospace industries, it is important to know the variations of the mechanical properties in the hydroforming process far the safe and durable design purposes. The principal goal of this paper is to suggest a procedure to evaluate the variations of tensile and fatigue properties before and after a hydroforming process. A miniature specimen, which is 0.2 mm thick and 2.3 mm wide, is devised and tested to measure local mechanical properties. The effects of specimen size, defects, surface roughness, and hydroforming on the tensile and fatigue behaviors are discussed.

• Journal of the Korean Home Economics Association
• /
• v.32 no.1
• /
• pp.93-102
• /
• 1994

The purpose of this study was to investigate the suitability of several knit fabrics for the hadicapped children's slacks. After the observation and wearing test abrasion resistance pilling liquid water transport properties and heat transport properties of the fabrics were tested. As specimens cotton/polypropylene interlock knits and sweat absorbent polyester knit fabric were selected and compared to the cotton denim and wool fabrics. As a result of observation test importance of extensibility durability and comfort related properties were recognized. Through the wearing test depending on the handicap type and orthoses different location and grade of pilling were observed. Knit fabrics used in this experiment were as durable as woven fabrics and showed excellent heat and liquid water transport properties. It was concluded therefore that cotton/polypropylene and sweat absorbent polyester knit fabrics are suitable materials for handicapped children's slacks.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.47-52
• /
• 2003

This study was performed to investigate the flow behavior of fresh concrete. strength properties, and durability properties on the chloride penetration resistance of hardened concrete containing Meta-Kaolin(MK) in the range from common strength to high strength to facilitate the use. The results are compared with properties of concrete containing Si1ca Fume(SF). As a result. superplasticizer required in MK concrete was decreased by 8-28% compared to SF concrete with the same slump, but MK concrete became more sticky than SF concrete. It was also found that considering the strength, the optimal cement replacement ratio of MK was 15%, and MK had concrete durable and dense by decreasing the average pore diameter of concrete.