• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.653-656
• /
• 2006

It is necessary for the new material and construction concept to make up for weak point which related to high durability and finish ability to solve exposure limit of exist construction method. This paper is deal with performance test(tier load, anti abrasion, anti impact, permeability, bond test) compositive using for water reacting soft urethane and rigid urethane to improve the exist problem which are crack movement, adhesive on the wet surface, impact and abrasion by tier load. It is getting decreasing demage compare with other exist materials after test by transfer load, movement and impact.

• 한국물환경학회지
• /
• 제20권2호
• /
• pp.163-169
• /
• 2004

Feasibility of using PE sheet laminated CSP(Corrugated steel pipe) to sewers were tested via corrosion and abrasion tests for PE sheet laminated CSP; 1) corrosion test for PE film and PE coated plate, 2) corrosion test for joint of PE sheet laminated CSP, 3) corrosion test for outside of PE sheet laminated CSP, and 4) abrasion test for inside of PE sheet laminated CSP. The results for the corrosion and abrasion tests are as follows. 1. Results for corrosion tests on PE films and zinc coated steel plates that were coated with PE films show that the surfaces of both PE were not changed compared to those of original PE samples. Furthermore, PE films maintained strong adhesion on the steel plates even though they were exposed to sewage and seawater provided cutting planes of the steel plates were treated with molding. But, results for corrosion tests on the spots that were previously cut off by a knife and a cutting planes of the steel plates were treated without molding show that steel plates have been corroded if they were exposed to sewage and seawater. 2. Results for corrosion tests on joints of PE sheet laminated corrugated steel using sewage show that gathering rust was observed at cutting plane of PE sheet laminated corrugated steel after 180 days, but PE film was not flaked off. However, PE film at cutting plane was flaked off when PE sheet laminated corrugated steel was exposed to seawater. Furthermore, flaking process was severely progressed at lockseam points of which the surfaces were not smooth. 3. Results for laying PE sheet laminated corrugated steel under the ground show that the surface of untouched PE film was almost identical to that of original PE film. However, the spots that were previously cut off by a knife and a cutting plane of PE sheet laminated corrugated steel have flaked off. 4. As a result of abrasion tests conducted with PE sheet laminated corrugated steel and sand, brilliance and thickness of PE was not greatly changed under the severe abrasion conditions. Therefore, the durability of PE sheet laminated corrugated steel for abrasion was determined to be good.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권3호
• /
• pp.140-148
• /
• 2016

이 논문은 표면 차수벽형 석괴댐(Concrete-Faced Rock-Filled Dam) 콘크리트의 내구성능 개선에 관한 것이다. 댐은 영구 구조물이며 그 중요성을 감안할 때 충분한 내구성능이 확보되어야 한다. 이 논문에서는 플라이애시와 PVA 섬유를 혼입함으로써 차수벽 콘크리트의 내구성능을 개선하고자 하였으며, 플라이애시와 PVA 섬유 혼입율에 따른 내구성능 향상 검증을 위하여 기본물성 (강도, 소성수축, 자기수축)을 포함한 내구성능 검증 실험(염소이온 침투, 마모 저항성, 동결융해 저항성)을 수행하였다. 실험 결과, 플라이애시 15%와 PVA 섬유 0.1%를 혼입하였을 때 내구성능 개선 효과가 뛰어난 것으로 나타났다. 검증된 차수벽 콘크리트의 현장 적용을 통해 표면 차수벽형 석괴댐의 안전성 및 내구성 개선에 기여할 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권6호
• /
• pp.418-423
• /
• 2012

원통형 단판적층재(LVL)의 구조재 이외의 공예재 등의 용도개발을 위하여 원통형 단판적층재의 내수접착성과 도장처리에 따른 내마모성 및 표면경도를 측정하였다. 레조시놀 수지와 경화제(paraformaldehyde)를 100 : 5의 혼합비로 하여 접착 경화한 원통형 단판적층재의 전체적인 접착층에 대한 삶음박리 접착력은 양호한 편이었다. 내마모성은 횡단면이 접선단면보다 상대적으로 우수하였으며, 접선단면에 자외선 차단 오일을 도장 처리한 경우 내마모성이 향상되었다. 표면경도는 횡단면의 경우, 낙엽송 중심재가 라디에타소나무 단판적층 부위보다 높았고, 접선단면의 경우에는 접착층 부위가 단판부위보다 높게 나타났다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.349-352
• /
• 2007

Asphalt overlay resurfacing techniques have been widely utilized in maintaining asphalt concrete in Korea, causing severe traffic congestions while being in construction and difference in level due to the repeated overlay. Besides on these technical difficulties, there have been financial disadvantages associated with technique, mainly because overlay method has been executed for pavements with intact foundations, which is contrary to the norm. This study is aiming to increase the expected life length of the asphalt pavement up to the endurance period, to raise the efficiency of the pavement by maximizing the social benefit and to enhance public character of the street through combining ceramics with epoxy resins, which has advantages in compatibility with the existing pavement materials, durability to abrasion and endurance. It has been expected that the adoption of new method and pavement materials to the actual work sites will develop the performance of the pavements, and to lengthen the durability of the existing materials. The other advantages of the 'thin surfacing' method could be the improved adhesiveness, waterproof, corrosion-proof and bending strength.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.189-195
• /
• 2004

It compared quality characteristics for the stone surface treatment system and its products. With the result, the flame burner equipment was mainly used to the surface treatment of granite, but it occurred greatly the high temperature, the rock fragment, the noise and dust. For the other side, the whetstone polishing machine for the polishing was a maintenance for the specific physical properties of stone, and it did not occur the stone fragment and the dust. The durability of the stone products due to the flame burner was investigated with that it falls to $20\sim25\%$ more than the surface treatment by the whetstone polishing. Share's hardness of the polishing products in the durability test showed more greatly index than the flame burner and conventional product. The polishing products of Pochon stone in the case of the abrasion resistance showed great more $15\%$ than the general products, more $9\%$ than the products by the flame burner.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.53-60
• /
• 2018

For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

• 한국지반환경공학회 논문집
• /
• 제14권6호
• /
• pp.31-38
• /
• 2013

본 논문에서는 친환경고화재와 자연토, 물을 혼합하여 포설한 후 다짐장비를 이용하여 지반을 고결시키는 임도포장공법에 대한 기초연구를 수행하였다. 포장체의 목표강도는 2.0MPa로 설정하였고 고화재의 혼합비, 자연토의 종류, 양생기간별로 공시체를 제작하여 일축압축강도특성과 내구성을 평가하였다. 일축압축강도시험은 동일한 혼합비의 시멘트를 혼합한 공시체와 친환경고화재를 혼합한 공시체를 제작하여 강도를 비교하였으며, 내구성 평가를 위한 시험은 표면마모시험, 유수저항성 시험 등을 수행하였다. 또한, 임도의 특성상 탐방객들도 이용이 가능하므로 보행만족도를 평가하기 위하여 쇠구슬과 골프공을 이용한 SB, GB시험을 수행하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.1-8
• /
• 2023

해양 및 수리구조물은 수분침투뿐만 아니라 해양의생물의 부착 등에 의해서도 내구손상이 발생하게 된다. 따라서 본 연구에서는 해양 콘크리트 등을 위해 자가세척기능을 갖는 방오 코팅제를 개발하고자 하였다. AKD와 셀룰로오스 나노섬유 및 BADGE를 혼합한 방오코팅제를 접촉각 140°내외의 소수성과 기울임각 15°에서 충분한 방오성능 확보한 것으로 확인하였다. 표면의 내마모성 시험에서는 최대 0.015g의 손실만이 발생하는 것으로 나타났다. 내구성 실험에서도 염소이온투과시험결과 코팅제가 도포된 변수에서는 염소이온의 투가가 거의 발생하지 않았으며, 탄산화와 동결융해 손상 또한 역시 거의 발생하지 않아 콘크리트의 내구성 확보에서도 효과가 있는 것으로 분석되었다.

• Advances in concrete construction
• /
• 제13권1호
• /
• pp.101-111
• /
• 2022

The rapid development of the construction industry in the world causes a rapid increase in the consumption of aggregate resources, which leads to the depletion of existing aggregate reserves. The use of recycled aggregate in the production of concrete and mortar may be a good solution to reduce the use of natural raw materials and to reduce demolition waste in the environment. In this study investigating the use of recycled aggregate in mortar production, mortar mixtures were produced by substituting 0%, 25%, 50% and 100% fine recycled aggregate (FRA) instead of natural aggregate. The effect of 20% and 40% fly ash (FA) substitutes on cement mortar performance was also investigated. Compressive and flexural strength, drying shrinkage, abrasion resistance, water absorption and capillary water absorption were investigated on the produced mortars. The increase in the use of FRA reduced the compressive and flexural strengths of mortars. While the capillarity coefficients, water absorption, rapid chloride permeability and drying shrinkage of the mortars increased with the increase in the use of FRA, the effect of the use of fly ash on the rate of increase remained lower. The increased use of FRA has improved abrasion resistance as well.